To our custo mers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corpor ation took over all the business of both
companies. Therefore, althoug h the old com pany name remains in this docum ent, it is a valid
Renesas Electronics document. W e appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Ren esas E lectronics assumes no liability whatsoever for any da mages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified acco rding to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, et c.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electro nic app liances; machine tool s; p ersonal electron ic equipment; and indu strial robots .
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equ i pment; submersible repeaters; nu clear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
interven tion (e.g. excision, et c.), and any oth er applications or purposes that pose a direct th reat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific chara cterist ics such as the o ccurren ce of failure at a certai n rate an d malfunct ion s under certai n u se cond ition s. Further,
Renesas Electronics pr oducts are not subject to radiation resi stance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for det ai ls as to enviro nmental matters such as the en vi ronmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as us ed in this document means Renesas Electronics Corporation and also includes its majo ri ty-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
*All brand names and product names are trademarks or registered trademarks of their respective companies.

Function
The IC61-0644-052 is an IC socket that can be soldered to a foot
pattern for a 64-pin 0.8mm-pitch QFP (64P6N-A) package MCU
(manually soldering type).
Application
Using this IC socket, developers can connect a 64-pin 0.8
mm-pitch LCC (64D0) package MCU or an emulator probe to the
foot pattern on a target that is prepared for a 64P6N-A package
MCU. The foot pattern's land length needed to fit the IC socket is
longer than that of the 64P6N-A.
Dimensions
20.8(D)×20.0(W)×6.2(H)mm
Foot Pattern Reference Dimensions
See Appendix A "Reference Dimensional Drawing for Common
64-pin 0.8mm-pitch QFP Foot Pattern".
IC61-0644-052
64-pin LCC Socket (Manually Soldering Type) Made by Yamaichi Electronics Co., Ltd.
*To purchase the IC61-TOOL-4 pull-out tool which detaches an MCU on
IC61 Series, please contact Yamaichi Elect Co., LTD.
[Ordering Information] See Appendix H "Ordering Information".
*All brand names and product names are trademarks or registered trademarks of their respective companies.
IC61-0644-053
Function
The IC61-0644-053 is an IC socket that can be soldered to a foot
pattern for a 64-pin 0.8mm-pitch QFP (64P6N-A) package MCU
(mounting type).
Application
Using this IC socket, developers can connect a 64-pin 0.8
mm-pitch LCC (64D0) package MCU or an emulator probe to the
foot pattern on a target that is prepared for a 64P6N-A package
MCU. The foot pattern's land length needed to fit the IC socket is
equal to that of 64P6N-A.
Dimensions
20.8(D)×20.0(W)×5.3(H)mm
Foot Pattern Reference Dimensions
See Appendix A "Reference Dimensional Drawing for Common
64-pin 0.8mm-pitch QFP Foot Pattern".
*To purchase the IC61-TOOL-4 pull-out tool which detaches an MCU on
IC61 Series, please contact Yamaichi Elect Co., LTD.
[Ordering Information] See Appendix H "Ordering Information".
64-pin LCC Socket (Mounting Type) Made by Yamaichi Electronics Co., Ltd.
*All brand names and product names are trademarks or registered trademarks of their respective companies.

Function
The IC61-0644-088 is an IC socket that can be soldered to a foot
pattern for an 64-pin 0.8mm-pitch QFP (64P6N-A) package
MCU (manually soldering type).
Application
Using this IC socket, developers can connect a 64-pin 0.8
mm-pitch LCC (64D0) package MCU or an emulator probe to the
foot pattern on a target that is prepared for an 64P6N-A package
MCU. The foot pattern's land length needed to fit the IC socket is
equal to that of the 64P6N-A.
Dimensions
20.8(D)×20.0(W)×8.3(H)mm
Foot Pattern Reference Dimensions
See Appendix A "Reference Dimensional Drawing for Common
64-pin 0.8mm-pitch QFP Foot Pattern".
IC61-0644-088
64-pin LCC Socket (Manually Soldering Type) Made by Yamaichi Electronics Co., Ltd.
*To purchase the IC61-TOOL-4 pull-out tool which detaches an MCU on
IC61 Series, please contact Yamaichi Elect Co., LTD.
[Ordering Information] See Appendix H "Ordering Information".
*All brand names and product names are trademarks or registered trademarks of their respective companies.
IC61-080-079
Function
The IC61-080-079 is an IC socket that can be soldered to a foot
pattern for an 80-pin 0.8mm-pitch QFP (80P6N-A or 80P6-B)
package MCU (mounting type).
Application
Using this IC socket, developers can connect an 80-pin 0.8
mm-pitch LCC (80D0) package MCU or an emulator probe to the
foot pattern on a target that is prepared for an 80P6N-A or
80P6-B package MCU. The foot pattern's land length needed to
fit the IC socket is equal to that of the 80P6-B.
Dimensions
26.2(D)×20.0(W)×5.0(H)mm
Foot Pattern Reference Dimensions
See Appendix B "Reference Dimensional Drawing for Common
80-pin 0.8mm-pitch QFP Foot Pattern".
*To purchase the IC61-TOOL-4 pull-out tool which detaches an MCU on
IC61 Series, please contact Yamaichi Elect Co., LTD.
[Ordering Information] See Appendix H "Ordering Information".
80-pin LCC Socket (Mounting Type) Made by Yamaichi Electronics Co., Ltd.
*All brand names and product names are trademarks or registered trademarks of their respective companies.

Function
The IC61-080-081 is an IC socket that can be soldered to a foot
pattern for an 80-pin 0.8mm-pitch QFP (80P6N-A) package
MCU (manually soldering type).
Application
Using this IC socket, developers can connect an 80-pin 0.8
mm-pitch LCC (80D0) package MCU or an emulator probe to the
foot pattern on a target that is prepared for an 80P6N-A package
MCU. The foot pattern's land length needed to fit the IC socket is
equal to that of the 80P6N-A.
Dimensions
26.2(D)×20.0(W)×8.3(H)mm
* The foot pattern dimension of IC61-080-081 is equal to that of
80P6N-A.
Foot Pattern Reference Dimensions
See Appendix B "Reference Dimensional Drawing for Common
80-pin 0.8mm-pitch QFP Foot Pattern".
IC61-080-081
80-pin LCC Socket (Manually Soldering T ype) Made by Yamaichi Electronics Co., Lt d.
*To purchase the IC61-TOOL-4 pull-out tool which detaches an MCU on
IC61 Series, please contact Yamaichi Elect Co., LTD.
[Ordering Information] See Appendix H "Ordering Information".
*All brand names and product names are trademarks or registered trademarks of their respective companies.
IC61-0804-046
Function
The IC61-0804-046 is an IC socket that can be soldered to a foot
pattern for an 80-pin 0.8mm-pitch QFP (80P6-B or 80P6N-A)
package MCU (manually soldering type).
Application
Using this IC socket, developers can connect an 80-pin 0.8
mm-pitch LCC (80D0) package MCU or an emulator probe to the
foot pattern on a target that is prepared for an 80P6-B or
80P6N-A package MCU. The foot pattern's land length needed to
fit the IC socket is longer than that of the 80P6-B or 80P6N-A.
Dimensions
26.2(D)×20.0(W)×6.2(H)mm
Foot Pattern Reference Dimensions
See Appendix B "Reference Dimensional Drawing for Common
80-pin 0.8mm-pitch QFP Foot Pattern".
*To purchase the IC61-TOOL-4 pull-out tool which detaches an MCU on
IC61 Series, please contact Yamaichi Elect Co., LTD.
[Ordering Information] See Appendix H "Ordering Information".
80-pin LCC Socket (Manually Soldering T ype) Made by Yamaichi Electronics Co., Lt d.
*All brand names and product names are trademarks or registered trademarks of their respective companies.

Function
The IC61-1004-051 is an IC socket that can be soldered to a foot
pattern for a 100-pin 0.65mm-pitch QFP (100P6S-A) package
MCU (manually soldering type).
Application
Using this IC socket, developers can connect a 100-pin 0.65
mm-pitch LCC package MCU or an emulator probe to the foot
pattern on a target that is prepared for a 100P6S-A package MCU.
The foot pattern's land length needed to fit the IC socket is a little
longer than that of the 100P6S-A.
Dimensions
26.7(D)×23.6(W)×6.6(H)mm
Foot Pattern Reference Dimensions
See Appendix C "Reference Dimensional Drawings for Common
100-pin 0.65mm-pitch QFP Foot Pattern".
IC61-1004-051
100-pin LCC Socket (Manually Soldering T ype) Made by Yamaichi Electronics Co., Lt d.
*To purchase the IC61-TOOL-4 pull-out tool which detaches an MCU on
IC61 Series, please contact Yamaichi Elect Co., LTD.
[Ordering Information] See Appendix H "Ordering Information".