MATERIAL SAFETY DATA SHEET NO. 0091E PAGE 1 OF 4
MATERIAL SAFETY DATA SHEET
CHEMTRONICS CW8200
CIRCUITWORKS ROSIN FLUX DISPENSING PEN
1. IDENTIFICATION OF SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
COMMERCIAL PRODUCT NAME: CODE NO.
CIRCUITWORKS ROSIN FLUX DISPENSING PEN CW8200
MANUFACTURER/SUPPLIER: CHEMTRONICS, INC.
8125 Cobb Center Drive
Kennesaw, Georgia 30152 USA
Phone Number: 1-770-424-4888
Fax Number: 1-770-423-0748
EMERGENCY: 1-703-527-3887
2. COMPOSITION/INFORMATION ON INGREDIENTS
HAZARDOUS INGREDIENTS CAS No. CLASSIFICATION R PHRASES CONCENTRATION
Isopropanol 67-63-0 F R11 85.0-99.0
3. HAZARDS IDENTIFICATION
Main Hazards Highly Flammable.
Health Effects - Eyes Liquid may cause slight transient irritation.
Health Effects - Skin Repeated or prolonged contact may produce defatting of
the skin leading to irritation and dermatitis.
Health Effects - Ingestion Swallowing may have the following effects: light
headedness, nausea, drowsiness
Health Effects - Inhalation Exposure to vapour at high concentrations may have the
following effects: light headedness, drowsiness,
4. FIRST-AID MEASURES
First Aid - Eyes Immediately flood the eye with plenty of water, preferably
warm, for at least 20 minutes, holding the eye open.
First Aid - Skin Wash skin with soap and water. Apply a reconditioning
skin cream.
First Aid - Ingestion Do not induce vomiting. Obtain medical attention.
First Aid - Inhalation Remove from exposure.
5. FIRE-FIGHTING MEASURES
Extinguishing Media Use water spray, foam, dry chemical or carbon dioxide.
Unsuitable Extinguishing Media: Do not use waterjet.
Protective Equipment for Fire-Fighting: Wear self contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions: Wear appropriate protective clothing. Ventilate the area.
Environmental Precautions: Try to prevent the material from entering drains or water
courses.
Spillages: Contain and absorb using earth, sand or other inert
material.
MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET
CHEMTRONICS CW8200 CIRCUITWORKS ROSIN FLUX DISPENSING PEN
7. HANDLING AND STORAGE
Handling: Avoid inhaling vapour. Avoid contact with eyes, skin and
clothing. Adequate ventilation should be provided if there
is risk of vapour build-up. To avoid the build-up of
electrostatic charges, earth all containers and piping when
transferring from one vessel to another.
MATERIAL SAFETY DATA SHEET NO. 0091E PAGE 2 OF 4
Storage: Storage and transfer equipment should be adequately
earthed and bonded to prevent the accumulation of static
charges. Store away from sources of heat or ignition.
Store in original containers.
8. EXPOSURE CONTROLS /PERSONAL PROTECTION
Occupational Exposure Standards:
1. ISOPROPYL ALCOHOL An exposure limit of 400ppm 8h TWA is recommended.
Engineering Control Measures Exposure to this material may be controlled in a number
of ways. The measures appropriate for a particular
worksite depend on how the material is used and on the
potential for exposure. Administrative controls and
personal protective equipment may also be required.
Respiratory Protection Respiratory protection if there is a risk of exposure to high
vapour concentrations.
Hand Protection: Use a good quality barrier cream.
Eye Protection: Chemical goggles if there is a risk of eye contact.
Body Protection: Normal work wear.
Protection During Application: During application, adequate ventilation must be provided.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Colour: Colourless
Odour: Characteristic
Flashpoint (PMCC) (°C): 12
Explosion Limits (%): Not determined
Solubility in water (kg/m3): Soluble
Flammability Classified as “Highly Flammable” in the EEC
Auto-flammability Not determined
Vapour Density (Air=1): Heavier than air.
Evaporation Rate > 1 (referenced as n-butyl acetate = 1)
MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET
CHEMTRONICS CW8200 CIRCUITWORKS ROSIN FLUX DISPENSING PEN
10. STABILITY AND REACTIVITY
Stability: No unusual reactivity.
Conditions to Avoid: Static discharge.
Materials to avoid: Strong oxidizing agents.
Hazardous Decomposition Products: None known
11. TOXICOLOGICAL INFORMATION
Acute Toxicity Low order of acute toxicity.
12. ECOLOGICAL INFORMATION
Mobility: If released to air it will disperse rapidly.
MATERIAL SAFETY DATA SHEET NO. 0091E PAGE 3 OF 4
13. DISPOSAL CONSIDERATIONS
Product Disposal Dispose of in accordance with all applicable local and
national regulations.
Container Disposal: Dispose of containers with care.
14. TRANSPORTATION INFORMATION
UN Number: 1993
UN Proper Shipping Name: Flammable liquid, n.o.s. (Isopropanol)
UN Class 3
UN Packaging Group II
ADR/RID Substance Identification Number 1993
ADR/RID - Description Inflammable liquids having a flash-point below 21°C,
not toxic and not corrosive.
ADR/RID - Class 3
ADR/RID - Item No. 3b
ADR/RID - Hazard Identification Number 33
IMDG - Proper Shipping Name Flammable liquid, n.o.s. (Isopropanol)
IMDG - Packaging Group II
IMDG - Class 3.2
IMDG - Marine Pollutant No.
IMDG - Ems Number 3-07
IMDG - Page Number 3230
IATA - Proper Shipping Name Flammable liquid, n.o.s. (Isopropanol)
IATA - Packaging Group II
IATA - Class 3
Tremcard No. TEC(R) 527
MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET
CHEMTRONICS CW8200 CIRCUITWORKS ROSIN FLUX DISPENSING PEN
15. REGULATORY INFORMATION
Labeling Information
F Highly Flammable
R Phrases: Highly flammable.
S Phrases: Keep away from sources of ignition - No smoking.
Do not breathe gas/fumes/vapour/spray. Keep container
tightly closed, in a cool well ventilated place. Take
precautionary measures against static discharges. Keep
out of reach of children.
16. OTHER INFORMATION:PRODUCT INFORMATION: 1-770-424-4888
Product Use: For industrial use only. Cleaning solvent.
MSDS first issued: 4/3/98
MSDS data revised: 4/3/98
EC Legislation EC Directive 91/155/EEC defining the laying down and
detailed arrangements for the system of specific information
relating to dangerous preparations.
MATERIAL SAFETY DATA SHEET NO. 0091E PAGE 4 OF 4
EC Directive 88/379/EEC relating to the classification,
packaging and labelling of dangerous preparations.
To the best of our knowledge, the information contained herein is accurate. However, all materials may present
unknown hazards and should be used with caution. In particular, improper use of our products and their
inappropriate combination with other products and substances may produce harmful results which cannot be
anticipated. Final determination of the suitability of any material is the sole responsibility of the user. Although
certain hazards are described herein, we cannot guarantee that these are the only hazards that may exist.
