MM78C29/MM88C29 Quad Single-Ended Line Driver MM78C30/MM88C30 Dual Differential Line Driver General Description The MM78C30/MM88C30 is a dual differential line driver that also performs the dual four-input NAND or dual four-input AND function. The absence of a clamp diode to VCC in the input protection circuitry of the MM78C30/MM88C30 allows a CMOS user to interface systems operating at different voltage levels. Thus, a CMOS digital signal source can operate at a VCC voltage greater than the VCC voltage of the MM78C30 line driver. The differential output of the MM78C30/MM88C30 eliminates ground-loop errors. The MM78C29/MM88C29 is a non-inverting single-wire transmission line driver. Since the output ON resistance is a low 20X typ., the device can be used to drive lamps, relays, solenoids, and clock lines, besides driving data lines. Features Y Y Y Wide supply voltage range High noise immunity Low output ON resistance 3V to 15V 0.45 VCC (typ.) 20X (typ.) Logic Diagrams 1/4 MM78C29/MM88C29 TL/F/5908 - 1 1/2 MM78C30/MM88C30 TL/F/5908 - 2 C1996 National Semiconductor Corporation TL/F/5908 RRD-B30M36/Printed in U. S. A. http://www.national.com MM78C29/MM88C29 Quad Single-Ended Line Driver MM78C30/MM88C30 Dual Differential Line Driver February 1996 Absolute Maximum Ratings (Note 1) Operating VCC Range If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Voltage at Any Pin (Note 1) Storage Temperature Power Dissipation (PD) Dual-In-Line Small Outline 18V Average Current at Output MM78C30/MM88C30 MM78C29/MM88C29 Maximum Junction Temperature, Tj b 0.3V to VCC a 16V Operating Temperature Range MM78C29/MM78C30 MM88C29/MM88C30 3V to 15V Absolute Maximum VCC b 55 C to a 125 C b 40 C to a 85 C 50 mA 25 mA 150 C Lead Temperature (Soldering, 10 seconds) b 65 C to a 150 C 260 C 700 mW 500 mW DC Electrical Characteristics Min/Max limits apply across temperature range unless otherwise noted Symbol Parameter Conditions Min Typ Max Units CMOS TO CMOS VIN(1) Logical ``1'' Input Voltage VCC e 5V VCC e 10V 3.5 8 VIN(0) Logical ``0'' Input Voltage VCC e 5V VCC e 10V IIN(1) Logical ``1'' Input Current VCC e 15V, VIN e 15V IIN(0) Logical ``0'' Input Current VCC e 15V, VIN e 0V ICC Supply Current VCC e 5V V V 1.5 2 0.005 b1 1 b 0.005 0.05 V V mA mA 100 mA OUTPUT DRIVE ISOURCE Output Source Current MM78C29/MM78C30 MM88C29/MM88C30 MM78C29/MM88C29 MM78C30/MM88C30 ISINK Output Sink Current MM78C29/MM78C30 MM88C29/MM88C30 ISOURCE Output Source Resistance MM78C29/MM78C30 MM88C29/MM88C30 http://www.national.com VOUT e VCC b1.6V, VCC t 4.5V, Tj e 25 C Tj e 125 C b 57 b 32 b 80 b 50 mA mA VOUT e VCC b 1.6V, VCC t 4.75V, Tj e 25 C Tj e 85 C b 47 b 32 b 80 b 60 mA mA b2 b 20 mA VOUT e 0.4V, VCC e 4.5V, Tj e 25 C Tj e 125 C 11 8 20 14 mA mA VOUT e 0.4V, VCC e 10V, Tj e 25 C Tj e 125 C 22 16 40 28 mA mA VOUT e 0.4V, VCC e 4.75V, Tj e 25 C Tj e 85 C 9.5 8 22 18 mA mA VOUT e 0.4V, VCC e 10V, Tj e 25 C Tj e 125 C 19 15.5 40 33 mA mA VOUT e VCC b 0.8V VCC t 4.5V VOUT e VCC b 1.6V, VCC t 4.5V, Tj e 25 C Tj e 125 C 20 32 28 50 X X VOUT e VCC b 1.6V, VCC t 4.75V, Tj e 25 C Tj e 85 C 20 27 34 50 X X 2 DC Electrical Characteristics Min/Max limits apply across temperature range, unless otherwise noted (Continued) Symbol Parameter Conditions Min Typ Max Units VOUT e 0.4V, VCC e 4.50V, Tj e 25 C Tj e 125 C 20 28 36 50 X X VOUT e 0.4V, VCC e 10V, Tj e 25 C Tj e 125 C 10 14 18 25 X X VOUT e 0.4V, VCC e 4.75V, Tj e 25 C Tj e 85 C 18 22 41 50 X X VOUT e 0.4V, VCC e 10V, Tj e 25 C Tj e 85 C 10 12 21 26 X X OUTPUT DRIVE (Continued) ISINK Output Sink Resistance MM78C29/MM78C30 MM88C29/MM88C30 Output Resistance Temperature Coefficient Source Sink iJA 0.55 0.40 %/ C %/ C Thermal Resistance MM78C29/MM78C30 (D-Package) 100 C/W MM88C29/MM88C30 (N-Package) 150 C/W AC Electrical Characteristics* TA e 25 C, CL e 50 pF Symbol tpd Parameter Propagation Delay Time to Logical ``1'' or ``0'' MM78C29/MM88C29 MM78C30/MM88C30 tpd CIN CPD Differential Propagation Delay Time to Logical ``1'' or ``0'' MM78C30/MM88C30 Conditions Min Typ Max Units (See Figure 2 ) VCC e 5V VCC e 10V 80 35 200 100 ns ns VCC e 5V VCC e 10V 110 50 350 150 ns ns 400 150 ns ns RL e 100X, CL e 5000 pF (See Figure 1 ) VCC e 5V VCC e 10V Input Capacitance MM78C29/MM88C29 MM78C30/MM88C30 (Note 3) (Note 3) 5.0 5.0 pF pF Power Dissipation Capacitance MM78C29/MM88C29 MM78C30/MM88C30 (Note 3) (Note 3) 150 200 pF pF *AC Parameters are guaranteed by DC correlated testing. Note 1: ``Absolute Maximum Ratings'' are those values beyond which the safety of the device cannot be guaranteed. Except for ``Operating Temperature Range'' they are not meant to imply that the devices should be operated at these limits. The table of ``Electrical Characteristics'' provides conditions for actual device operation. Note 2: Capacitance is guaranteed by periodic testing. Note 3: CPD determines the no load AC power consumption of any CMOS device. For complete explanation see 54C/74C Family Characteristics application note AN-90 (CMOS Logic Databook). 3 http://www.national.com Connection Diagrams Dual-In-Line Package MM78C30/MM88C30 Dual-In-Line Package MM78C29/MM88C29 TL/F/5908-3 TL/F/5908 - 4 Top View Top View Order Number MM88C29M or MM88C29N Order Number MM88C30M or MM88C30N For Complete Military 883 Specifications, see RETS Data Sheet. Order Number MM78C29J/883, MM78C29W/883, MM78C30J/883 or MM78C30W/883 Typical Performance Characteristics MM78C29/MM88C29 Typical Propagation Delay vs Load Capacitance MM78C29/MM88C29 Typical Propagation Delay vs Load Capacitance MM78C30/MM88C30 Typical Propagation Delay vs Load Capacitance MM78C30/MM88C30 Typical Propagation Delay vs Load Capacitance Typical Sink Current vs Output Voltage Typical Source Current vs Output Voltage TL/F/5908 - 5 http://www.national.com 4 AC Test Circuits TL/F/5908 - 7 TL/F/5908 - 6 FIGURE 1 TL/F/5908 - 8 TL/F/5908 - 9 FIGURE 2 Typical Applications Digital Data Transmission Note 1: Exact value depends on line length. TL/F/5908 - 10 Note 2: Optional to control response time. Note 3: VCC e 4.5V to 5.5V for the DS7820, VCC e 4.5V to 15V for the DS78C20. 5 http://www.national.com Typical Applications (Continued) TL/F/5908 - 11 TL/F/5908 - 12 Note 1: VCC is 3V to 15V Typical Data Rate vs Transmission Line Length TL/F/5908 - 13 Note 1: The transmission line used was Y22 gauge unshielded twisted pair (40k termination). Note 2: The curves generated assume that both drivers are driving equal lines, and that the maximum power is 500 mW/package. http://www.national.com 6 Physical Dimensions inches (millimeters) Ceramic Dual-In-Line Package (J) Order Number MM78C29J, MM78C30J, MM88C29J or MM88C30J NS Package Number J14A 7 http://www.national.com MM78C29/MM88C29 Quad Single-Ended Line Driver MM78C30/MM88C30 Dual Differential Line Driver Physical Dimensions inches (millimeters) (Continued) Molded Dual-In-Line Package (N) Order Number MM78C29N, MM78C30N, MM88C29N or MM88C30N NS Package Number N14A LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 http://www.national.com 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: a49 (0) 180-530 85 86 Email: europe.support @ nsc.com Deutsch Tel: a49 (0) 180-530 85 85 English Tel: a49 (0) 180-532 78 32 Fran3ais Tel: a49 (0) 180-532 93 58 Italiano Tel: a49 (0) 180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2308 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.