Order this document by C106/D SEMICONDUCTOR TECHNICAL DATA Reverse Blocking Triode Thyristors *Motorola preferred devices . . . Glassivated PNPN devices designed for high volume consumer applications such as temperature, light, and speed control; process and remote control, and warning systems where reliability of operation is important. * * * * SCRs 4 AMPERES RMS 50 thru 600 VOLTS Glassivated Surface for Reliability and Uniformity Power Rated at Economical Prices Practical Level Triggering and Holding Characteristics Flat, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation and Durability G A K A G A K CASE 77-08 (TO-225AA) STYLE 2 MAXIMUM RATINGS (TJ = 25C unless otherwise noted.) Rating Peak Repetitive Forward and Reverse Blocking Voltage(1) (RGK = 1 k) C106F (TC = -40 to 110C) C106A C106B C106D C106M Symbol VDRM or VRRM Value Unit Volts 50 100 200 400 600 RMS Forward Current (All Conduction Angles) IT(RMS) 4 Amps Average Forward Current (TA = 30C) IT(AV) 2.55 Amps Peak Non-repetitive Surge Current (1/2 Cycle, 60 Hz, TJ = -40 to +110C) ITSM 20 Amps I2t 1.65 A2s PGM 0.5 Watt PG(AV) 0.1 Watt IGFM 0.2 Amp Circuit Fusing (t = 8.3 ms) Peak Gate Power Average Gate Power Peak Forward Gate Current 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, (cont.) positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Preferred devices are Motorola recommended choices for future use and best overall value. Motorola Thyristor Device Data Motorola, Inc. 1995 1 MAXIMUM RATINGS -- continued Rating Peak Reverse Gate Voltage Symbol Value Unit VGRM 6 Volts TJ -40 to +110 C Tstg -40 to +150 C -- 6 in. lb. Operating Junction Temperature Range Storage Temperature Range Mounting Torque(1) 1. Torque rating applies with use of compression washer (B52200F006). Mounting torque in excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. Anode lead and heatsink contact pad are common. For soldering purposes (either terminal connection or device mounting), soldering temperatures shall not exceed +200C. For optimum results, an activated flux (oxide removing) is recommended. THERMAL CHARACTERISTICS (TC = 25C, RGK = 1 k unless otherwise noted.) Characteristic Symbol Max Unit Thermal Resistance, Junction to Case RJC 3 C/W Thermal Resistance, Junction to Ambient RJA 75 C/W ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit -- -- -- -- 10 100 A A -- -- 2.2 Volts -- -- 30 75 200 500 0.4 0.5 0.2 -- -- -- 0.8 1 -- IHX 0.3 0.4 0.14 -- -- -- 3 6 2 mA dv/dt -- 8 -- V/s Turn-On Time tgt -- 1.2 -- s Turn-Off Time tq -- 40 -- s Peak Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM, RGK = 1000 Ohms) TJ = 25C TJ = 110C IDRM, IRRM Forward "On" Voltage (IFM = 1 A Peak) VTM Gate Trigger Current (Continuous dc) (VAK = 6 Vdc, RL = 100 Ohms) (VAK = 6 Vdc, RL = 100 Ohms, TC = -40C) IGT Gate Trigger Voltage (Continuous dc) (VAK = 6 Vdc, RL = 100 Ohms, RGK = 1000 Ohms) (VAK = Rated VDRM, RL = 3000 Ohms, RGK = 1000 Ohms, TJ = 110C) Holding Current (VD = 12 Vdc, RGK = 1000 Ohms) VGT TJ = -40C FIGURE 1 - AVERAGE CURRENT DERATING 110 TC, CASE TEMPERATURE ( C) 100 DC 70 60 50 HALF SINE WAVE RESISTIVE OR INDUCTIVE LOAD. 50 to 400 Hz 40 30 20 10 0 .4 .8 1.2 1.6 2.0 2.4 2.8 3.2 IT(AV) AVERAGE ON-STATE CURRENT (AMPERES) 2 3.6 4.0 P(AV), AVERAGE ON-STATE POWER DISSIPATION (WATTS) Forward Voltage Application Rate (TJ = 110C, RGK = 1000 Ohms, VD = Rated VDRM) 80 Volts TJ = 25C TJ = 25C TJ = -40C TJ = +110C 90 A FIGURE 2 - MAXIMUM ON-STATE POWER DISSIPATION 10 JUNCTION TEMPERATURE 110C 8 HALF SINE WAVE RESISTIVE OR INDUCTIVE LOAD 50 TO 400Hz. 6 DC 4 2 0 0 .4 .8 1.2 1.6 2.0 2.4 2.6 3.2 3.6 4.0 IT(AV) AVERAGE ON-STATE CURRENT (AMPERES) Motorola Thyristor Device Data Package Interchangeability The dimensional diagrams below compare the critical dimensions of the Motorola C-106 package with competitive devices. It has been demonstrated that the smaller dimensions of the Motorola package make it compatible in most lead-mount and chassis-mount applications. The user is advised to compare all critical dimensions for mounting compatibility. .295 ____ .305 .145 ____ .155 .148 ____ .158 .115 ____ .130 .425 ____ .435 .400 ____ .360 .095 ____ .105 .385 ____ .365 .575 ____ .655 .040 .020 ____ .026 .094 BSC .025 ____ .035 .315 ____ .285 .420 ____ .400 .015 ____ .025 .045 ____ .055 Motorola C-106 Package Motorola Thyristor Device Data .026 ____ .019 .520 ____ .480 5_ TYP 1 2 3 .050 ____ .095 .127 ____ DIA .123 .135 ____ .115 .105 ____ .095 .105 ____ .095 .054 ____ .046 .190 ____ .170 Competitive C-106 Package 3 PACKAGE DIMENSIONS -B- U F Q -A- NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C M STYLE 2: PIN 1. CATHODE 2. ANODE 3. GATE 1 2 3 H K J V G S R 0.25 (0.010) A M M B M D 2 PL 0.25 (0.010) M A M B DIM A B C D F G H J K M Q R S U V INCHES MIN MAX 0.425 0.435 0.295 0.305 0.095 0.105 0.020 0.026 0.115 0.130 0.094 BSC 0.050 0.095 0.015 0.025 0.575 0.655 5 _ TYP 0.148 0.158 0.045 0.055 0.025 0.035 0.145 0.155 0.040 --- MILLIMETERS MIN MAX 10.80 11.04 7.50 7.74 2.42 2.66 0.51 0.66 2.93 3.30 2.39 BSC 1.27 2.41 0.39 0.63 14.61 16.63 5 _ TYP 3.76 4.01 1.15 1.39 0.64 0.88 3.69 3.93 1.02 --- M CASE 77-08 (TO-225AA) Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. 4 Motorola Thyristor Device Data *C106/D* C106/D