050 [1.27] TF TOL NON-ACCUM = 025 [0.64] A 100 [24] WP 8 4.035 [0.89] (8) ToL NON-AccUM 6.085 [1.85] (2) ~ et tt 22 128 [3.25] ms, 705 [aie] L sa has BR 4.620 [15.75] : P.CB. RECOMMENDED HOLE LAYOUT FROM. COMPONENT SIDE TOLERANCE 4.003 [0.08] UNLESS OTHERWISE SPECIFED ooo tu]| - ~ 670 [17.02] MAX +| 125 [3.18}.010 a [6.78] 125 [3.18] 155 [3.94}4,010 [0.25] }-.218 [5.55] REF (4) 142 [3.59] REF (2) *.640 [16.28] MAX 376 [9.55] REF (2) co aa 080 [2.03] o f- J M M ,670 [17.02] MAX J (MEASURED AT FACE. OF CONNECTOR) DATE REY ECN APP. BY 10-7-02 | Al 5508 NOTES: 1. CONNECTOR MATERIALS: HOUSING: THERMOPLASTIC UL94 V-0 CONTACT/SHIELD: COPPER ALLOY SHELD PLATING: NICKEL OR TIN CONTACT PLATING: SELECTIVE GOLD IN CONTACT AREA SEE CHART FOR PART NUMBER 2 FOR PRODUCT SPECFICATION SEE PROZ2-01 3. TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. 4. THE SUGGESTED PANEL OPENING IS INTENDED TO GIVE USER THE ABILITY TO HAVE REASONABLE uACK/PANEL CLEARANCES, YET MAINTAIN GROUNDING CAPABLITY. LOWER MATING FORCES OR TIGHTER ASSEMBLY TOLERANCES. 50 MICRO-INCHES 30 MICRO-INCHES SS-7188VSANF-01 CONTACT PLATING PART NUMBER THIRD ANGLE PROJECTION @ = tewart Connector 55-7188VSA-NF01-50 S Gea ane e agreaten http: //www.stewartconnector.com (717) 235-7512 Fax (717) 235-7054 DO NOT SCALE DRAWING DRAWING IS SUBJECT TO CHANGE Wi THOUT NOTICE * EIGHT CONTACT, EIGHT POSITION; VERTICAL MOUNT SHIELDED JACK CAT 5 JACK, "-NF NON-FLANGE, -01" GROUNDING TABS @ 25 DMENSONS: INCHES [METRIC] UNLESS OTHERWISE SPECFED TOLERANCES ARE +005 [0.13] ANGLES ARE + 1 SET 1 OF 1 THSS DRAWNG AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF STEWART CONNECTOR ("SCS") AND SHALL NOT REPRODUCED, COPED OR USED MAY MAE WTHOUT 7 Mky Be PARSITED CE A POI AY Be OG. ace me CT710076 at DOT Dap, | PATE 7_7_98 GORE KE | PE 77-98 APPO BIE AF DATE 77-98