NIPPON CHEMI-CON CORPORATION
1266
Specifi cations in this bulletin are subject to change without notice.
1
Engineering Bulletin
High reliability, ESR specified, 105C
Aluminum Electrolytic Capacitors
No.754A / Jan.2005
?RATED RIPPLE CURRENT MULTIPLIERS
@Frequency Mul ti pli ers
Rated voltage (Vdc)
10
16 to 35
50 & 63
120 1k 10k 100k
F5, F6.3 & F8
F5 to F8
F5 (2.2MF and up), F6.3 & F8
F5 (1MF and below)
F10 to F18
F10 to F18
F10 to F18
0.85
0.50
0.70
0.20
0.40
0.60
0.70
0.95
0.80
0.88
0.66
0.76
0.84
0.86
0.98
0.94
0.97
0.90
0.93
0.96
0.96
1.00
1.00
1.00
1.00
1.00
1.00
1.00
Case size Frequency(Hz)
@Fully compatible with case size of KME
@Endurance with ripple current : 105C 2,000 to 5,000 hours (125C capability)
@For automobile modules and other high reliability equipment
@
-
40C ESR is specifi ed for F12.5 and larger
?SPECIFICATIONS
(at 20C, 120Hz)
(at 20C after 2 minutes)
(at 20C, 120Hz)
(at 120Hz)
(at
-
40C & 20C/ 100kHz)
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
ESR
Endurance
Shelf Life
Items
-
55 to +105C
10 to 63Vdc
P20% (M)
I=0.01CV or 3MA, whichever is greater.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
Rated voltage (Vdc)
tanE (Max.)
When nominal capacitance exceeds 1,000MF, add 0.02 to the value above for each 1,000MF increase.
Capacitance change : C (-40C)/C (+20C)]0.70
Shall not exceed the values shown in the STANDARD RATINGS
After the capacitors are subjected to the rated voltage with the rated ripple current applied at 105C or with 50% of the rated ripple current
applied at 125C for the specified period of time, the following specifications shall be satisfied when the capacitors are restored to 20C.
Time at 105CF5 & 6.3 : 2,000 hours F8 & 10 : 3,000 hours F12.5 and larger : 5,000 hours
Time at 125CF5 & 6.3 : 500 hours F8 & 10 : 750 hours F12.5 and larger : 1,250 hours
Capacitance change [P20% of the initial value
DF (tanE)[200% of the initial specified value
Leakage current [The initial specified value
ESR [The initial specified value (Applied to 12.5mm diameter and larger)
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 105C
without voltage applied.
Capacitance change [P20% of the initial value
DF (tanE)[200% of the initial specified value
Leakage current [The initial specified value
ESR [The initial specified value (Applied to 12.5mm diameter and larger)
Characteristics
10V
0.38 16V
0.32 25V
0.28 35V
0.24 50V
0.20 63V
0.16
?DIMENSIONS (Radial Lead Type=VB) [mm]
5
0.5
2.0
fD
fd
F
fD'
L'
6.3
0.5
2.5
8
0.6
3.5
12.5
0.6
5.0
16
0.8
7.5
18
0.8
7.5
10
0.6
5.0
FD+0.5max.
L+2.0max.
Sleeve(Brown : PET)*
L' 15min. 4min.
FD'
Fd
FP0.5
Vent
(except F5)
FP0.5
(F5 to F10) (F12.5 to F18)
Gas escape end seal
* : PET sleeve (orange) is available upon request if the 125C load life is required.
?PART NUMBERING SYSTEM
@Terminal Code : E
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 0.1MF:R10, 100MF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 50V:500)
Series code
Category
E E X - A A A EA A A A A A A A NM
13426789105121311 16 17 181514
NIPPON CHEMI-CON CORPORATION
1266
Specifi cations in this bulletin are subject to change without notice.
2
Engineering Bulletin
High reliability, ESR specified, 105C
Aluminum Electrolytic Capacitors
No.754A / Jan.2005
?STANDARD RATINGS
Case size Initial value End of life
Part No.
fDbL(mm) ESR(omax/100kHz) Rated ripple
(mArms/105c)ESR(omax/100kHz)
20c−40c100kHz 120Hz 20c−40c
10
100 5B11 2.7 41 86 60
--
EEX-100ESS101ME11D
220 6.3B11 1.2 18 147 102
--
EEX-100ESS221MF11D
330 8B11.5 0.58 8.7 242 169
--
EEX-100ESS331MHB5D
470 8B11.5 0.58 8.7 242 169
--
EEX-100ESS471MHB5D
1,000 10B16 0.28 4.2 453 385
--
EEX-100ESS102MJ16S
2,200 12.5B20 0.12 1.8 832 706 0.24 3.6 EEX-100ESS222MK20S
3,300 12.5B25 0.089 1.4 1,050 892 0.18 2.8 EEX-100ESS332MK25S
4,700 16B25 0.065 0.98 1,360 1,160 0.13 2.0 EEX-100ESS472ML25S
6,800 16B31.5 0.050 0.75 1,670 1,420 0.10 1.5 EEX-100ESS682MLN3S
10,000 18B35.5 0.040 0.60 1,990 1,690 0.080 1.2 EEX-100ESS103MMP1S
16
47 5B11 2.7 41 86 43
--
EEX-160ESS470ME11D
100 6.3B11 1.2 18 147 74
--
EEX-160ESS101MF11D
220 8B11.5 0.58 8.7 242 121
--
EEX-160ESS221MHB5D
330 8B11.5 0.58 8.7 242 121
--
EEX-160ESS331MHB5D
470 10B12.5 0.40 6.0 344 241
--
EEX-160ESS471MJC5S
1,000 10B20 0.20 3.0 581 408
--
EEX-160ESS102MJ20S
2,200 12.5B25 0.089 1.4 1,050 734 0.18 2.8 EEX-160ESS222MK25S
3,300 16B25 0.065 0.98 1,360 951 0.13 2.0 EEX-160ESS332ML25S
4,700 16B31.5 0.050 0.75 1,670 1,170 0.10 1.5 EEX-160ESS472MLN3S
6,800 18B35.5 0.040 0.60 1,990 1,390 0.080 1.2 EEX-160ESS682MMP1S
10,000 18B40 0.036 0.54 2,130 1,490 0.072 1.1 EEX-160ESS103MM40S
25
47 5B11 2.7 41 86 43
--
EEX-250ESS470ME11D
100 6.3B11 1.2 18 147 74
--
EEX-250ESS101MF11D
220 8B11.5 0.58 8.7 242 121
--
EEX-250ESS221MHB5D
330 10B12.5 0.40 6.0 344 241
--
EEX-250ESS331MJC5S
470 10B16 0.28 4.2 453 317
--
EEX-250ESS471MJ16S
1,000 12.5B20 0.12 1.8 832 582 0.24 3.6 EEX-250ESS102MK20S
2,200 16B25 0.065 0.98 1,360 951 0.13 2.0 EEX-250ESS222ML25S
3,300 16B31.5 0.050 0.75 1,670 1,170 0.10 1.5 EEX-250ESS332MLN3S
4,700 18B35.5 0.040 0.60 1,990 1,390 0.080 1.2 EEX-250ESS472MMP1S
6,800 18B40 0.036 0.54 2,130 1,490 0.072 1.1 EEX-250ESS682MM40S
35
33 5B11 2.7 41 86 43
--
EEX-350ESS330ME11D
47 6.3B11 1.2 18 147 74
--
EEX-350ESS470MF11D
100 8B11.5 0.58 8.7 242 121
--
EEX-350ESS101MHB5D
220 10B12.5 0.40 6.0 344 241
--
EEX-350ESS221MJC5S
330 10B16 0.28 4.2 453 317
--
EEX-350ESS331MJ16S
470 10B20 0.20 3.0 581 407
--
EEX-350ESS471MJ20S
1,000 12.5B25 0.089 1.4 1,050 734 0.18 2.8 EEX-350ESS102MK25S
2,200 16B31.5 0.050 0.75 1,670 1,170 0.10 1.5 EEX-350ESS222MLN3S
3,300 18B35.5 0.040 0.60 1,990 1,390 0.080 1.2 EEX-350ESS332MMP1S
4,700 18B40 0.036 0.54 2,130 1,490 0.072 1.1 EEX-350ESS472MM40S
50
22 5B11 2.7 41 86 34
--
EEX-500ESS220ME11D
33 6.3B11 1.2 18 147 59
--
EEX-500ESS330MF11D
47 6.3B11 1.2 18 147 59
--
EEX-500ESS470MF11D
100 8B11.5 0.58 8.7 242 97
--
EEX-500ESS101MHB5D
220 10B16 0.28 4.2 453 272
--
EEX-500ESS221MJ16S
330 10B20 0.20 3.0 581 349
--
EEX-500ESS331MJ20S
470 12.5B20 0.12 1.8 832 499 0.24 3.6 EEX-500ESS471MK20S
1,000 16B25 0.065 0.98 1,360 815 0.13 2.0 EEX-500ESS102ML25S
2,200 18B35.5 0.040 0.60 1,990 1,200 0.080 1.2 EEX-500ESS222MMP1S
63
0.1 5B11 21 315 30 1
--
EEX-630ESSR10ME11D
0.22 5B11 16 240 35 7
--
EEX-630ESSR22ME11D
0.33 5B11 12 180 40 8
--
EEX-630ESSR33ME11D
0.47 5B11 10 150 44 9
--
EEX-630ESSR47ME11D
1.0 5B11 7.0 105 53 10
--
EEX-630ESS1R0ME11D
2.2 5B11 6.0 90 57 22
--
EEX-630ESS2R2ME11D
3.3 5B11 5.0 75 63 25
--
EEX-630ESS3R3ME11D
4.7 5B11 4.0 60 70 28
--
EEX-630ESS4R7ME11D
10 5B11 2.7 41 86 34
--
EEX-630ESS100ME11D
22 6.3B11 1.2 18 147 58
--
EEX-630ESS220MF11D
33 6.3B11 1.2 18 147 58
--
EEX-630ESS330MF11D
47 8B11.5 0.58 8.7 242 96
--
EEX-630ESS470MHB5D
100 10B12.5 0.40 6.0 344 206
--
EEX-630ESS101MJC5S
220 10B20 0.20 3.0 581 348
--
EEX-630ESS221MJ20S
330 12.5B20 0.12 1.8 832 499 0.24 3.6 EEX-630ESS331MK20S
470 12.5B25 0.089 1.4 1,050 629 0.18 2.8 EEX-630ESS471MK25S
1,000 16B31.5 0.050 0.75 1,670 1,000 0.10 1.5 EEX-630ESS102MLN3S
Items
Capacitance
(mF)
Vdc
SS : Lead forming / T aping code
