SURFACE MOUNT DISPLAY APSC03-41SYKWA-F01 Features SUPER BRIGHT YELLOW Description 0.3 INCH DIGIT HEIGHT. The Super Bright Yellow source color devices are made with LOW CURRENT OPERATION. DH InGaAlP on GaAs substrate Light Emitting Diode. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 1100PCS / REEL. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAF2729 REV NO: V.2 DATE: APR/26/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000278-01 Selection Guide Part No. Dice APSC03-41SYKWA-F01 Iv (ucd) @ 10mA Lens Type SUPER BRIGHT YELLOW (InGaAIP) WHITE DIFFUSED Min. Typ. 8000 35400 Description Common Cathode, Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Yellow D Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 590 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Super Bright Yellow Units Power dissipation 125 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF2729 REV NO: V.2 DATE: APR/26/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000278-01 Super Bright Yellow APSC03-41SYKWA-F01 SPEC NO: DSAF2729 REV NO: V.2 DATE: APR/26/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000278-01 APSC03-41SYKWA-F01 Recommended Soldering Pattern (Units : mm) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAF2729 REV NO: V.2 DATE: APR/26/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000278-01 PACKING & LABEL SPECIFICATIONS APSC03-41SYKWA-F01 Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF2729 REV NO: V.2 DATE: APR/26/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000278-01