SPEC NO: DSAF2729 REV NO: V.2 DATE: APR/26/2005 PAGE: 1 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000278-01
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
APSC03-41SYKWA-F01 SUPER BRIGHT YELLOW
Description
The Super Bright Yellow source color devices are made with
DH InGaAlP on GaAs substrate Light Emitting Diode.
SURFACE MOUNT DISPLAY
Features
0.3 INCH DIGIT HEIGHT.
LOW CURRENT OPERATION.
EXCELLENT CHARACTER APPEARANCE.
I.C. COMPATIBLE.
MECHANICALLY RUGGED.
GRAY FACE,WHITE SEGMENT.
PACKAGE : 1100PCS / REEL.
RoHS COMPLIANT.
SPEC NO: DSAF2729 REV NO: V.2 DATE: APR/26/2005 PAGE: 2 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000278-01
Selection Guide
Part No. Dice Lens Type Iv (ucd)
@ 10mA
Min. Typ.
APSC03-41SYKWA-F01 SUPER BRIGHT YELLOW (InGaAIP) WHITE DIFFUSED 8000 35400 Common Cathode,
Rt. Hand Decimal.
Description
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Super Bright Yellow 590 nm IF=20mA
λDDominant Wavelength Super Bright Yellow 590 nm IF=20mA
∆λ1/2 Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA
C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz
VFForward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA
IRReverse Current Super Bright Yellow 10 uA VR = 5V
Parameter Super Bright Yellow Units
Power dissipation 125 mW
DC Forward Current 30 mA
Peak Forward Current [1] 175 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
SPEC NO: DSAF2729 REV NO: V.2 DATE: APR/26/2005 PAGE: 3 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000278-01
Super Bright Yellow APSC03-41SYKWA-F01
SPEC NO: DSAF2729 REV NO: V.2 DATE: APR/26/2005 PAGE: 4 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000278-01
APSC03-41SYKWA-F01
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Reel Dimension
SPEC NO: DSAF2729 REV NO: V.2 DATE: APR/26/2005 PAGE: 5 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000278-01
PACKING & LABEL SPECIFICATIONS APSC03-41SYKWA-F01
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
