1N5059GP THRU 1N5062GP
Glass Passivated Junction Rectifier
Reverse V oltage 200 to 800 V
Forward Current 1.0 A
0.034 (0.86)
0.028 (0.71)
0.140 (3.6)
0.104 (2.6)
Dia.
DIA.
0.230 (5.8)
0.300 (7.6)
1.0 (25.4)
min.
1.0 (25.4)
min.
Patented*
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter Symbol 1N5059GP 1N5060GP 1N5061GP 1N5062GP Unit
* Maximum repetitive peak reverse voltage VRRM 200 400 600 800 V
Maximum RMS voltage VRMS 140 280 420 560 V
* Maximum DC blocking voltage VDC 200 400 600 800 V
* Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=75°C IF(AV) 1.0 A
* Peak forward surge current
8.3ms single half sine-wave superimposed IFSM 50 A
on rated load (JEDEC Method)
* Maximum full load reverse current, full cycle
average 0.375" (9.5mm) lead length at TA=25°C IR(AV) 5.0 µA
TA=75°C 150
Typical thermal resistance (NOTE 1) RΘJA 45 °C/W
RΘJL 20
Operating junction and storage temperature range TJ, TSTG -65 to +175 °C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter Symbol 1N5059GP 1N5060GP 1N5061GP 1N5062GP Unit
* Maximum instantaneous forward voltage at 1.0A, TA=75°C VF1.2 V
* Maximum DC reverse current TA= 25°C 5.0
at rated DC blocking voltage TA=175°C IR300 µA
Typical reverse recovery time at
IF=0.5A, IR=1.0A, Irr=0.25A trr 2.0 µs
Typical junction capacitance at 4.0V, 1MHz CJ15 pF
NOTES:
(1) Thermal resistance from junction to ambient and from junction to lead at 0.375” (9.5mm) lead length, P.C.B. mounted
*JEDEC registered values
DO-204AC (DO-15)
3/10/00
Features
• Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
• High temperature metallurgically bonded construction
• Cavity-free glass passivated junction
• Capable of meeting environmental standards of
MIL-S-19500
• 1.0 Ampere operation at TA=75°C with no thermal
runaway
• Typical IRless than 0.1µA
• High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs., (2.3kg) tension
Mechanical Data
Case: JEDEC DO-204AC, molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-
750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
®
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
1N5059GP THRU 1N5062GP
Ratings and Characteristic Curves(TA= 25°C unless otherwise noted)
1.0
25 50 75 100 150 175
0.2
0.4
0.6
0.8
0
0125 110 100
0
10
30
50
40
20
0.4 0.6 0.8 1.0 1.4 1.6
0.01
0.1
1
10
1.2
10
30
100
10
1
1
020 40 60 80 100
0.01
0.1
1
10
0.01 0.1 110 100
0.1
1
10
100
FIG. 1 - FORWARD CURRENT DERATING CURVE
AMBIENT TEMPERATURE, °C
AVERAGE FORWARD RECTIFIED CURRENT,
AMPERES
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
NUMBER OF CYCLES AT 60 HZ
PEAK FORWARD SURGE CURRENT,
AMPERES
FIG. 3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT,
AMPERES
INSTANTANEOUS REVERSE LEAKAGE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE, pF
REVERSE VOLTAGE, VOLTS
TJ=TJmax.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
TJ=125°C
TJ=100°C
TJ=25°C
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
TJ=25°C
f=1.0 MHZ
Vsig=50mVp-p
0.375" (9.5mm) LEAD LENGTH
60 HZ
RESISTIVE OR
INDUCTIVE LOAD
FIG. 6 - TYPICAL TRANSIENT THERMAL IMPED ANCE
TRANSIENT THERMAL IMPEDANCE (°C/W)
t, PULSE DURATION, sec
