The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 0.5mm Pitch Connectors with Ground Plate for Board-to-Board Connections FX10 Series Ground plate Signal contact Housing m 5m 0.7 Metal fitting Ground plate and metal fitting make contact Features mm 0.5 m 5m 0.7 Cross-Section of Mating 1. Improved Transmission Efficiency Between Boards Transmission characteristics have been improved through a design that fixes ground plates to both sides of the header and receptacle. 2. 10 Signal:1 Ground Arrangement Signal and ground are arranged in a ratio of 10:1 with the ground plate SMT connected to the board. The ground stability achieved serves to reduce noise. 3. Metal Fittings for Added Solder Weld Strength Metal fittings provide greater adhesion to the board, protecting against peeling. The unique connector design provides a connection between the fitting and the ground plate for a stronger ground. 4. Suited to High-Density Applications The signal contact pitch of 0.5 mm produces a smaller connector utilizing less board area for mounting. 5. High contact reliability Effective mating length is 1.1 mm for signal contacts. 6. Optional Ground Plate An alternate style without the ground plate is available. The space provided by the ground plate removal has been filled with additional signal contacts. 7. Board-To-Board Dimensions of 4mm and 5 mm Are Available BStack Height With ground plate Headers Receptacles FX10#-*P/*-SV FX10#-*P/*-SV1 FX10#-*S/*-SV 4mm 5mm FX10-*P-SV FX10-*P-SV1 4mm 5mm Without ground plate Headers Receptacles FX10-*S-SV Applications Notebook computers, PDA, and other miniature electronic equipment. A212 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please FX10 check the products status on the HiroseConnectors website RoHS search www.hirose-connectors.com, or contact your Hirose sales representative. Series0.5mm Pitch withat Ground Plate for Board-to-Board Connections Product Specifications Rating -55 to 85c Storage temperature range -10 to +60c (Note 1) Rated current 0.3 A (Note 1) Operating temperature range Relative humidity 95% or less Storage humidity range Rated voltage 50 V AC Operating humidity range -40 to 70% (Note 1) (No condensation) Item Requirements 1. Insulation resistance 100 Mo or greater 2. Voltage resistance No flashover or breakdown 3. Contact resistance 60 mo or less No electrical discontinuity for 1s or greater 4. Vibration No damage, cracks, or parts looseness No electrical discontinuity for 1s or longer 5. Shock No damage, cracks, or parts looseness Contact resistance of 70 mo or less, insulation resistance of 6. Damp heat 100 Mo or greater, no damage, cracks, or parts looseness (Steady state) Contact resistance of 70 mo or less, insulation resistance of 7. Temperature cycle 100 Mo or greater, no damage, cracks, or parts looseness Contact resistance of 70 mo or less 8. Durability No damage, cracks, or parts looseness 9. Resistance to No melting of resin portion which affects performance soldering heat Conditions Measured at 100 V DC 150 V AC applied for one minute Measured at 100 mA Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions, 10 cycles each Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, for 3 cycles in the both directions of each of the 3 axes Temperature of 40c, humidity of 90 to 95%, duration 96 h Temperature: -55c 15 to 35c 85c 15 to 35c Time: 30 min. 2 to 3 min. 30 min. 2 to 3 min. for 5 cycles 50 times Reflow: At the recommended temperature profile Soldering iron temperature: 360c for 5 seconds Note 1: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period. The operating temperature and humidity range are suited to the non-conducting condition following board assembly. Note 2: The aforementioned specifications are representative of this series. For information on specific parts, confirm with Sales Office. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials Part Material Insulator Process LCP UL94V-0 Beige Engagement Area: Gold plating of 0.1m Header Contacts Notes Tenmination Area: Tin plating Phosphor bronze Engagement Area: Gold plating of 0.1m Receptacle --- Termination Area: Flash plating Ground plate Phosphor bronze Tin plating --- Metal fitting Phosphor bronze Tin plating --- Product Number Configuration FX10 # - P / - SV 1 ( ) 1 2 4 5 6 7 3 1 Series name: FX10 2 Form Symbol A: With guide post B: Without guide post 3 Number of contacts With ground plate Signal/Ground: 80/8, 100/10, 120/12, 140/14 Without ground plate Signal: 96, 120, 144, 168 4 Connector type P: Header S: Receptacle 5 Contact form SV: Straight SMT 6 Product height Blank: Standard 1 : Standard + 1mm 7 Packaging classification Blank(71): Tray packaging (21), (91): Embossed tape packaging A213 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinuedwith soon. Ground Please checkPlate the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX10 Series0.5mm Pitch Connectors for Board-to-Board Connections Headers with ground plate 4mm Stacking Height Unit: mm Number of Contacts Part No. CL No. A B C D E F FX10A- 80P/ 8-SV(71) CL570-0001-5-71 80 8 23.5 18 31.1 26.4 31.5 28.3 FX10A-100P/10-SV(71) CL570-0002-8-71 FX10A-120P/12-SV(71) CL570-0003-0-71 100 10 29.5 24 37.1 32.4 37.5 34.3 120 12 35.5 30 43.1 38.4 43.5 40.3 FX10A-140P/14-SV(71) FX10B- 80P/ 8-SV(71) CL570-0004-3-71 140 14 41.5 36 49.1 46.3 80 8 23.5 18 31.1 44.4 -- 49.5 CL570-0021-2-71 31.5 28.3 FX10B-100P/10-SV(71) CL570-0022-5-71 100 10 29.5 24 37.1 -- 37.5 34.3 FX10B-120P/12-SV(71) CL570-0023-8-71 120 12 35.5 30 43.1 -- 43.5 40.3 FX10B-140P/14-SV(71) CL570-0024-0-71 140 14 41.5 36 49.1 -- 49.5 46.3 Signal Ground Remarks RoHS With guideposts YES Without guideposts [Specifications number] - , ( ) (71): Tray packaging (91): Embossed tape packaging Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits. 2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings. 3 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 4 Not required in products without guideposts. A214 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please FX10 check the products status on the HiroseConnectors website RoHS search www.hirose-connectors.com, or contact your Hirose sales representative. Series0.5mm Pitch withat Ground Plate for Board-to-Board Connections Headers with ground plate 5mm Stacking Height A0.2 (0.5) 0.20.05 5.90.3 (5.7) 2.50.2 A 0.50.05 (0.75) (0.75) (6) B0.2 4.50.3 C0.3 (0.6) 2-(O1) D0.1 Guidepost Unit: mm Number of Contacts Part No. CL No. A B C D E F FX10A- 80P/ 8-SV1(71) CL570-0101-0-71 80 8 23.5 18 31.1 26.4 31.5 28.3 FX10A-100P/10-SV1(71) CL570-0102-2-71 FX10A-120P/12-SV1(71) CL570-0103-5-71 100 10 29.5 24 37.1 32.4 37.5 34.3 120 12 35.5 30 43.1 38.4 43.5 40.3 FX10A-140P/14-SV1(71) FX10B- 80P/ 8-SV1(71) CL570-0104-8-71 140 14 41.5 36 49.1 46.3 80 8 23.5 18 31.1 44.4 -- 49.5 CL570-0121-7-71 31.5 28.3 FX10B-100P/10-SV1(71) CL570-0122-0-71 100 10 29.5 24 37.1 -- 37.5 34.3 FX10B-120P/12-SV1(71) CL570-0123-2-71 120 12 35.5 30 43.1 -- 43.5 40.3 FX10B-140P/14-SV1(71) CL570-0124-5-71 140 14 41.5 36 49.1 -- 49.5 46.3 Signal Ground Remarks RoHS With guideposts YES Without guideposts [Specifications number] - ,( ) (71): Tray packaging (91): Embossed tape packaging Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits. 2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings. 3 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 4 Not required in products without guideposts. A215 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinuedwith soon. Ground Please checkPlate the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX10 Series0.5mm Pitch Connectors for Board-to-Board Connections Receptacles with ground plate A0.2 (0.5) 0.20.05 7.30.3 (7.1) 2.50.2 A 0.50.05 (0.75) (6) (0.75) (0.6) 3.20.3 B0.2 C0.3 2-(O1) Guidepost D0.1 Unit: mm Number of Contacts Part No. CL No. A B C D E F FX10A- 80S/ 8-SV(71) CL570-0201-4-71 80 8 23.5 18 31.1 26.4 31.5 28.3 FX10A-100S/10-SV(71) CL570-0202-7-71 FX10A-120S/12-SV(71) CL570-0203-0-71 100 10 29.5 24 37.1 32.4 37.5 34.3 120 12 35.5 30 43.1 38.4 43.5 40.3 FX10A-140S/14-SV(71) FX10B- 80S/ 8-SV(71) CL570-0204-2-71 140 14 41.5 36 49.1 46.3 80 8 23.5 18 31.1 44.4 -- 49.5 CL570-0221-1-71 31.5 28.3 FX10B-100S/10-SV(71) CL570-0222-4-71 100 10 29.5 24 37.1 -- 37.5 34.3 FX10B-120S/12-SV(71) CL570-0223-7-71 120 12 35.5 30 43.1 -- 43.5 40.3 FX10B-140S/14-SV(71) CL570-0224-0-71 140 14 41.5 36 49.1 -- 49.5 46.3 Signal Ground Remarks RoHS With guideposts YES Without guideposts [Specifications number]- ,( ) (71): Tray packaging (91): Embossed tape packaging Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits. 2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings. 3 Not required in products without guideposts. A216 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please FX10 check the products status on the HiroseConnectors website RoHS search www.hirose-connectors.com, or contact your Hirose sales representative. Series0.5mm Pitch withat Ground Plate for Board-to-Board Connections Headers without ground plate 4mm Stacking Height A0.2 (5.7 ) 2.5 0.2 0.2 0.05 3.50.3 5.9 0.3 ( 0.5 ) (0.6 ) B0.3 2-(O1) Guidepost C0.1 Unit: mm Number of Contacts Part No. CL No. A B C D E FX10A- 96P-SV(71) CL570-0041-0-71 96 23.5 31.1 26.4 31.5 28.3 FX10A-120P-SV(71) FX10A-144P-SV(71) CL570-0042-2-71 120 29.5 37.1 32.4 37.5 34.3 CL570-0043-5-71 144 35.5 43.1 38.4 43.5 40.3 FX10A-168P-SV(71) CL570-0044-8-71 168 41.5 49.1 46.3 CL570-0051-3-71 96 23.5 31.1 44.4 -- 49.5 FX10B- 96P-SV(71) 31.5 28.3 FX10B-120P-SV(71) CL570-0052-6-71 120 29.5 37.1 -- 37.5 34.3 FX10B-144P-SV(71) CL570-0053-9-71 144 35.5 43.1 -- 43.5 40.3 FX10B-168P-SV(71) CL570-0054-1-71 168 41.5 49.1 -- 49.5 46.3 Signal Remarks RoHS With guideposts YES Without guideposts [Specifications number]- ,( ) (71): Tray packaging (91): Embossed tape packaging Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm D+0.1 0 0 E-0.1 1.450.05 0.50.03 6.3 +0.1 0 3.1 +0.1 0 2 O1.10.05 2 O1.20.05 0 4.1 -0.1 A0.05 0 2 -0.1 1 C0.05 0.30.03(Land) 0.250.03(Metal mask) Note 1 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 2 Not required in products without guideposts. A217 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinuedwith soon. Ground Please checkPlate the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX10 Series0.5mm Pitch Connectors for Board-to-Board Connections Headers without ground plate 5mm Stacking Height A 0.2 ( 5.7 ) 2.5 0.2 0.2 0.05 4.50.3 5.9 0.3 ( 0.5 ) (0.6 ) B 0.3 2-(O 1) Guidepost C0.1 Unit: mm Number of Contacts Part No. CL No. A B C D E FX10A- 96P-SV1(71) CL570-0141-4-71 96 23.5 31.1 26.4 31.5 28.3 FX10A-120P-SV1(71) FX10A-144P-SV1(71) CL570-0142-7-71 120 29.5 37.1 32.4 37.5 34.3 CL570-0143-0-71 144 35.5 43.1 38.4 43.5 40.3 FX10A-168P-SV1(71) CL570-0144-2-71 168 41.5 49.1 46.3 CL570-0151-8-71 96 23.5 31.1 44.4 -- 49.5 FX10B- 96P-SV1(71) 31.5 28.3 FX10B-120P-SV1(71) CL570-0152-0-71 120 29.5 37.1 -- 37.5 34.3 FX10B-144P-SV1(71) CL570-0153-3-71 144 35.5 43.1 -- 43.5 40.3 FX10B-168P-SV1(71) CL570-0154-6-71 168 41.5 49.1 -- 49.5 46.3 Signal Remarks RoHS With guideposts YES Without guideposts [Specifications number]- ,( ) (71): Tray packaging (91): Embossed tape packaging Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm D +0.1 0 0 E -0.1 2 O1.2 0.05 6.3 +0.1 0 3.1 +0.1 0 1.45 0.05 0.5 0.03 0 4.1 -0.1 A 0.05 2 O1.1 0.05 0 2 -0.1 1 C 0.05 0.3 0.03(Land) 0.250.03(Metal mask) Note 1 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 2 Not required in products without guideposts. A218 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please FX10 check the products status on the HiroseConnectors website RoHS search www.hirose-connectors.com, or contact your Hirose sales representative. Series0.5mm Pitch withat Ground Plate for Board-to-Board Connections Receptacles without ground plate A0.2 B0.3 3.20.3 ( 7.1 ) 0.2 0.05 2.5 0.2 7.3 0.3 ( 0.5 ) ( 0.6 ) 2-(O1) C0.1 Guidepost Unit: mm Number of Contacts Part No. CL No. A B C D E FX10A- 96S-SV(**) CL570-0241-9-** 96 23.5 31.1 26.4 31.5 28.3 FX10A-120S-SV(**) FX10A-144S-SV(**) CL570-0242-1-** 120 29.5 37.1 32.4 37.5 34.3 CL570-0243-4-** 144 35.5 43.1 38.4 43.5 40.3 FX10A-168S-SV(**) CL570-0244-7-** 168 41.5 49.1 46.3 CL570-0251-2-** 96 23.5 31.1 44.4 -- 49.5 FX10B- 96S-SV(**) 31.5 28.3 FX10B-120S-SV(**) CL570-0252-5-** 120 29.5 37.1 -- 37.5 34.3 FX10B-144S-SV(**) CL570-0253-8-** 144 35.5 43.1 -- 43.5 40.3 FX10B-168S-SV(**) CL570-0254-0-** 168 41.5 49.1 -- 49.5 46.3 Signal Remarks RoHS With guideposts YES Without guideposts [Specifications number]- ,( ) Blank: Tray packaging (21) : Embossed tape packaging Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm D +0.1 0 0 E -0.1 C0.05 O1.20.05 A0.05 1.450.05 7.7 +0.1 0 0 4.5 -0.1 0.50.03 3.1 +0.1 0 1 O1.10.05 0.30.03(Land) 0.250.03(Metal mask) Note 1 Not required in products without guideposts. A219 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinuedwith soon. Ground Please checkPlate the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX10 Series0.5mm Pitch Connectors for Board-to-Board Connections BEmbossed Carrier Tape Dimensions Unit: mm 0 O1.5 +0.1 120.1 40.1 1.750.1 Headers 2 0.1 (D) 0.9 Insertion Connector B C A0.1 FX10#-120P/12-SV1 B0.1 C0.3 0.2 0.05 +0.05 O1.5 1.750.1 +0.1 0 Receptacles ( 3.5) ( 0.4) 0.9 3.8 76.5 81.5 45.5 50.5 -SV1 FX10#-144P/ -SV1 FX10#-168P/ -SV1 34.2 68.4 72 76.5 81.5 FX10#- 80P/ 8-SV1 20.2 40.4 44 45.5 50.5 59 26.2 52.4 56 59 26.2 52.4 56 FX10#-196P/ -SV1 20.2 40.4 44 FX10#-120P/ -SV1 FX10#-144P/ -SV1 4.8 64 76.5 81.5 45.5 50.5 59 26.2 52.4 56 64 76.5 81.5 FX10#-168P/ -SV1 34.2 68.4 72 Note: There is no polarity in terms of embossed tape packaging for this product. A0.1 B0.1 C0.3 Insertion Connector A B C E F FX10#-120P/12-SV1 26.2 52.4 56 59 64 FX10#-140P/14-SV1 34.2 68.4 72 76.5 81.5 0.2 0.05 (7.6) (8) +0.05 (O80) (G) Reel Dimensions (E) (F) A220 FX10#-196P/ -SV1 20.2 40.4 44 45.5 50.5 FX10#-120P/ -SV1 FX10#-144P/ -SV1 26.2 52.4 56 59 64 FX10#-168P/ -SV1 34.2 68.4 72 76.5 81.5 Note: There is no polarity in terms of embossed tape packaging for this product. R0.75 0 O130.5 G FX10#- 80P/ 8-SV1 20.2 40.4 44 45.5 50.5 FX10#-100P/10-SV1 330 64 Unit: mm Unreeling direction G 64 FX10#-120P/ FX10#-140P/14-SV1 34.2 68.4 72 R0.75 0 59 -SV1 20.2 40.4 44 FX10#-120P/12-SV1 2 0.1 F FX10#-196P/ FX10#-100P/10-SV1 40.1 E 45.5 50.5 26.2 52.4 56 FX10#-140P/14-SV1 34.2 68.4 72 (6.2) (6.6) 120.1 D FX10#- 80P/ 8-SV1 20.2 40.4 44 FX10#-100P/10-SV1 Unreeling direction A (0.4) 330 370 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please FX10 check the products status on the HiroseConnectors website RoHS search www.hirose-connectors.com, or contact your Hirose sales representative. Series0.5mm Pitch withat Ground Plate for Board-to-Board Connections BRecommended Temperature Profile HRS test Conditions Test board Glass epoxy 161mm100mm1.6mm thick Solder method :Reflow Solder composition :Paste, Metal mask :0.15mm thick Reflow cycles :2 cycles 96.5%Sn/3%Ag/0.5%Cu The temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. BWashing Conditions Organic Solvent Washing Solvent IPA (Isopropyl alcohol) HCFC (Hydrochlorofluorocarbon) Room temperature washing Heated washing Yes Yes Yes Yes Water Type Washing When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins. Be careful that parts are not left with moisture remaining on them. Washing Precautions Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed. BConnector Handling Precautions 1. Allowable Creepage Dimensions at Time of Mating The effective mating length of this product is 1.1 mm for the signal portion and 1 mm for the ground portion. The creepage of the header and receptacle at the time of mating should be within 0.5 mm of the completely mating condition. 2. Retension of Boards Avoid the support of boards by connectors alone and adopt a locking measure that does not rely on the connectors. 3. Solder Repair Flux may rise as far as the contact portion of the connector depending on the flux coating and other factors at the time of repair. This will cause poor contact reliability; therefore, before use, the aforementioned washing conditions should be taken into consideration prior to connector washing. 4. Miscellaneous *Note that excessive twisting while inserting or withdrawing connectors will cause damage. *The shade of the molded items may vary somewhat depending on the manufacturing lot; however, this does not affect performance. A221