A213
FX10 Series●0.5mm Pitch Connectors with Ground Plate for Board-to-Board Connections
Measured at 100 V DC
150 V AC applied for one minute
Measured at 100 mA
Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions, 10
cycles each
Acceleration of 490 m/s
2
, 11 ms duration, sine half-wave
waveform, for 3 cycles in the both directions of each of the 3 axes
Temperature: -55ç→15 to 35ç→85ç→15 to 35ç
Time: 30 min. →2 to 3 min. →30 min. →2 to 3 min. for 5 cycles
Reflow: At the recommended temperature profile
Soldering iron temperature: 360çfor 5 seconds
Temperature of 40ç, humidity of 90 to 95%, duration 96 h
50 times
100 Møor greater
No flashover or breakdown
60 møor less
No electrical discontinuity for 1µs or greater
No damage, cracks, or parts looseness
No electrical discontinuity for 1µs or longer
No damage, cracks, or parts looseness
Contact resistance of 70 møor less
No damage, cracks, or parts looseness
No melting of resin portion which affects performance
■Product Specifications
Item Requirements Conditions
Note 1: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are suited to the non-conducting condition following board assembly.
Note 2: The aforementioned specifications are representative of this series. For information on specific parts, confirm with Sales Office.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
Rating Rated current
Rated voltage 0.3 A (Note 1)
50 V AC Operating temperature range
Operating humidity range
-55 to 85ç
Relative humidity 95% or less
(No condensation)
Storage temperature range
Storage humidity range -10 to +60ç(Note 1)
-40 to 70% (Note 1)
1.
Insulation resistance
2. Voltage resistance
3. Contact resistance
4. Vibration
5. Shock
6. Damp heat
(Steady state)
8. Durability
9. Resistance to
soldering heat
7. Temperature cycle
Contact resistance of 70 møor less, insulation resistance of
100 Møor greater, no damage, cracks, or parts looseness
Contact resistance of 70 møor less, insulation resistance of
100 Møor greater, no damage, cracks, or parts looseness
■Product Number Configuration
FX10 # -✽P / ✽-SV 1 (✽ ✽)
1 2 7
3
4 5 6
■Materials
Part Material Process Notes
Insulator
Contacts
Ground plate
Metal fitting
LCP
Phosphor bronze
Phosphor bronze
Phosphor bronze
Beige
Header
Engagement Area: Gold plating of 0.1µm
Tenmination Area: Tin plating
Receptacle
Engagement Area: Gold plating of 0.1m
Termination Area
: Flash plating
Tin plating
Tin plating
UL94V-0
---
---
---
Series name: FX10
Form Symbol
A: With guide post
B: Without guide post
Number of contacts
Signal/Ground: 80/8, 100/10, 120/12,
140/14
Signal: 96, 120, 144, 168
Connector type
P: Header
S: Receptacle
Contact form
SV: Straight SMT
Product height
Blank: Standard
1 : Standard + 1mm
Packaging classification
Blank(71): Tray packaging
(21), (91): Embossed tape packaging
3
5
6
4
7
1
2
With ground plate
Without ground plate