DP Series * DC Reversing Solid State Contactor * Ratings of 20, 40 & 60 Amps * Load voltage ratings of 1-48VDC * Optional Soft Start w/Brake, Soft Start/Soft Stop no Brake * LED input status indicator. Green (Forward), Yellow (Reverse) * DC control * cULus Recognized, IEC Rated, CE & RoHS Compliant PRODUCT SELECTION Description 4-15 VDC 18-32VDC 20 A 40 A 60 A DP4R60D20 DP4R60E20 DP4R60D40 DP4R60E40 DP4R60D60 DP4R60E60 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage [VDC] UL 508 Resistive Load, IEC 60947-4-1 DC-1 [Adc] UL 508 Motor Controller, IEC 60947-4-1 DC-3 [FLA] Minimum Load Current [mA] Maximum Surge Current (10ms) [Adc] Maximum Off-State Leakage Current @ Rated Voltage [A] Maximum On-State Voltage Drop @ Rated Current [Vdc] Combined Thermal Resistance Junction to Case (Rjc) [C/W] Maximum On-State Resistance, per switch, (RDS-ON) [Ohms] Total Power Dissipation per module, 2 switches conducting, Tj=100 C [Watts] Internal PWM For Soft Start/Stop Versions [Duty Cycle 10-100%] [Hz] Output Terminal Screw size Screw Torque Range [in lbs/Nm] Maximum Wire Size Weight (typical) 20 A 40 A 60 A 1-48 20 13 0.10 80 20 0.28 0.40 0.014 20 200 10-32 Combo Head 15-20 / 1.7-2.3 10 AWG 10.9 oz (310g) 1-48 40 14 0.10 140 20 0.28 0.20 0.007 40 200 1/4-20 Hex 20-25 / 2.3-2.8 8 AWG 12.2 oz (345g) 1-48 60 15 0.10 240 20 0.30 0.13 0.005 60 200 1/4-20 Hex 20-25 / 2.3-2.8 6 AWG 12.2 oz (345g) INPUT SPECIFICATIONS (1) Description Logic Supply Voltage Range [VDC] Minimum Logic Supply Current [mA] (2) Maximum Logic Supply Current [mA] (2) Control Voltage Range [VDC] Minimum Control Input Current @ Min voltage [mA] Maximum Control Input Current @ Max voltage [mA] Typical Interlocking Time [msec] Mating Connector (Not Supplied) DR4R60Dxx DR4R60Exx 4.5-15 16 20 4.5-15 0.20 1.0 200 Molex 050579404 or Equivalent 18-32 20 25 18-32 1.0 2.0 200 Molex 050579404 or Equivalent GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) Maximum Capacitance, Input to Output (pF) Ambient Operating Temperature Range Ambient Storage Temperature Range Housing Material Encapsulation GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Input circuit incorporates active current limiter WIRING DIAGRAM Parameters 2500 Vrms 109 Ohm 10 pF -30 to 80C -40 to 125C Valox 420 SEO Black, UL 94 V-0 Thermally conductive Epoxy MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS IEC 60068-2-6 Vibration - Compliant [1.55mm/ 10-55Hz] IEC 60068-2-27 Shock - Compliant [15G/11ms] IEC 61000-4-2 : Electrostatic Discharge - Level 2 IEC 61000-4-4 : Electrically Fast Transients - Level 2 (Criteria A) IEC 61000-4-5 : Electrical Surges - Level 2 (Criteria A) Rev 061411 ACCESSORIES OPERATING MODES ANNEX - ENVIROMENTAL INFORMATION