300W, DUAL-OUTPUT POWER SUPPLY HBC265 SERIES - ENCLOSED CASE * * * * * * * * Compact size -11.40" x 5.20" x 2.525" Two regulated and adjustable outputs 300W/400W of output power Full electronic protection Telecom quality Field-proven design topology Also available as plug-in module N+1 redundancy available The HBC265 Series of AC/DC converters uses a field proven high frequency half-bridge technology to generate 300W of output power with convection cooling and 400W if forced air is available. Virtually any DC output is possible with short delivery times. This low profile design features low component count and high efficiency. The use of high quality components and rigorous quality control results in an MTBF exceeding 200,000 hours at 45oC. SPECIFICATIONS Output Voltages Up to 200VDC per output Up to 15 Amps per output 300W with convection 400W with forced air Input Voltage 115/230VAC +/- 15% 47 - 63Hz Auto-ranging available Input Protection Thermal Fuse Inrush current limiting Consult factory for specific voltage combinations Input Isolation 2250VDC input to chassis 4300VDC input to output, 8mm spacing 500VDC output to chassis Full compliance to IEC950, CSA 22-2-950 and UL 1950 Please contact factory for approval status for the requested input/output configuration Efficiency Min 80% at full load RFI Suppression Meets FCC 20780 Class A and EN 55022 Class A conducted emissions Line/Load Regulation + /-1% combined for main output with other output tracking Output Ripple/Noise Better than 1% of output voltage peak to peak or 0.2% RMS of the output voltage (20HZ BW) Output Overvoltage Protection Double regulator loop on main output, second output tracking Hold Up Time Minimum 10ms at full load for 5% drop of output voltage Operating Temperature 0 to +50oC with convection. Extended temperature range available Temperature Drift 0.03% per oC over operating temperature range Dimensions `F' Package: 11.4" x 5.2" x 2.525" Connections: Screw type terminal block For other connectors please consult factory Warranty Twelve months subject to application within good engineering practice Overload Protection Current limiting with short circuit protection. Self-resetting thermostat for thermal protection Enhancements to these general specifications and customizing can be accommodated upon request Designed to meet all approval requirements Designer and manufacturer of quality converters, inverters, UPS systems, complete rack mount systems and DC-input fluorescent lamp inverters since 1982. Custom or standard. Absopulse is a BABT-approved Facility ABSOPULSE ELECTRONICS LTD 110 Walgreen Road Carp, Ontario K0A 1L0 CANADA Tel: (613) 836-3511 Binder Caption: AC/DC Power Supplies Fax: (613) 836-7488 E-mail: absopulse@absopulse.com Visit us at www.absopulse.com 07/08/99 Made in Canada