VG95234 Connectors VG95234 N1 and VG95234 N2 Wall Mount Receptacle with EMI/RFI Backshell and Heat Shrink Boot Lip, Sealing Grommet and Grounding Fingers VG95234 N1 32-6 Rear Mount Receptacle with EMI Backshell/Shrink Boot Adapter and... N1 - Threaded Holes N2 - Thru-Holes 1 L2 L3 S 1 P - Pin contacts S - Socket contacts N Alternate Insert Positions N-X-Y L6 D2 L5 D4 OA K 1 - Standard AWG Contacts (Omit for Metric) Contact Arrangement Basic Part Number D6 D5 D7 E D3 3.5 0.2 L4 L7 VG95234 N2 L1 D2 APPLICATION NOTES 1. Rear wall mount receptacle with EMI backshell and shrink boot 4. adapter. Standard insert is synthetic rubber, oil and low temperature resistant (-55C to +125C) IAW MIL-R-3065. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages 16-17 for additional contact information. 5. Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 3. Insert arrangements IAW VG95234. Please see pages 10-15. (c) 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com 42 VG95234 Connectors VG95234 N1 and VG95234 N2 Wall Mount Receptacle with EMI/RFI Backshell and Heat Shrink Boot Lip, Sealing Grommet and Grounding Fingers DIMENSIONS D2 Shell Size OA +0 -0.15 N1 N2 H13 10 SL 14 S 16 S 16 18 20 22 24 28 32 36 18.2 24.6 27.4 27.4 30.8 34.2 37.4 40.9 46.7 53.4 59.6 M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.7 3.7 4.3 4.3 E 0.1 L1 Max L2 +0.4 -0 L3 0.2 L4 0.3 Weight gr. Max 18.2 23.0 24.6 24.6 27.0 29.4 31.8 35.9 39.7 44.5 49.2 55 58 70 70 70 70 70 70 70 75 85 18.2 18.2 18.2 21.5 23.05 23.05 23.05 23.05 24.05 24.05 24.05 2.8 3.2 3.2 3.2 4.0 4.0 4.0 4.0 4.0 4.0 4.0 25.4 30.0 32.5 32.5 35.0 38.0 41.0 44.5 50.8 57.0 63.5 45 55 65 75 85 95 105 120 150 190 220 Please refer to VG95234M for dimensions D3, D4, D5, D6, D7, K, L5, L6 and L7. MATERIALS STANDARD FINISH (For QQ-A-591 Aluminum Shells) SHELLS INSERTS (Temperature Range) Aluminum Alloy IAW QQ-A-591 Shells High Insulation Synthetic Rubber -55C/+125C Requirements CRIMP CONTACTS Thermal Shock Salt Spray After Thermal Shock Electrical Conductivity Abrasion Resistance Copper Alloy with Silver Plating Over Nickel (c) 2008 Glenair, Inc. U.S. CAGE Code 06324 Cadmium with Olive Drab Passivation IAW QQ-P-416 -55C + 125C 500 hour Very Good Very Good Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com 43 www.glenair.com