U.S. CAGE Code 06324
www.glenair.com E-Mail: sales@glenair.com
42
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2008 Glenair, Inc. Printed in U.S.A.
VG95234
Connectors
VG95234 N1 and VG95234 N2
Wall Mount Receptacle
with EMI/RFI Backshell and Heat Shrink Boot Lip,
Sealing Grommet and Grounding Fingers
VG95234 N2
K
ØA D5D4 D6
L1
D3D7
1
L7
3.5 ±0.2
L5
L6
D2L2
D2
L3
L4
E
Alternate Insert
Positions
N - X - Y
Basic Part Number Contact
Arrangement
P - Pin contacts
S - Socket contacts
Rear Mount
Receptacle with EMI
Backshell/Shrink
Boot Adapter and...
N1 - Threaded Holes
N2 - Thru-Holes
1 - Standard AWG Contacts
(Omit for Metric)
VG95234 N1 32-6 S 1 N
APPLICATION NOTES
1. Rear wall mount receptacle with EMI backshell and shrink boot
adapter.
2. Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
3. Insert arrangements IAW VG95234. Please see pages 10-15.
4. Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
5. Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
6. All dimensions are metric unless otherwise noted.
U.S. CAGE Code 06324
www.glenair.com E-Mail: sales@glenair.com
43
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2008 Glenair, Inc. Printed in U.S.A.
VG95234
Connectors
VG95234 N1 and VG95234 N2
Wall Mount Receptacle
with EMI/RFI Backshell and Heat Shrink Boot Lip,
Sealing Grommet and Grounding Fingers
DIMENSIONS
Shell
Size
ØA
+0
-0.15
D2 E
±0.1
L1
Max
L2
+0.4
-0
L3
±0.2
L4
±0.3
Weight
gr.
Max
N1 N2
H13
10 SL 18.2 M4 3.2 18.2 55 18.2 2.8 25.4 45
14 S 24.6 M4 3.2 23.0 58 18.2 3.2 30.0 55
16 S 27.4 M4 3.2 24.6 70 18.2 3.2 32.5 65
16 27.4 M4 3.2 24.6 70 21.5 3.2 32.5 75
18 30.8 M4 3.2 27.0 70 23.05 4.0 35.0 85
20 34.2 M4 3.2 29.4 70 23.05 4.0 38.0 95
22 37.4 M4 3.2 31.8 70 23.05 4.0 41.0 105
24 40.9 M4 3.7 35.9 70 23.05 4.0 44.5 120
28 46.7 M5 3.7 39.7 70 24.05 4.0 50.8 150
32 53.4 M5 4.3 44.5 75 24.05 4.0 57.0 190
36 59.6 M5 4.3 49.2 85 24.05 4.0 63.5 220
Please refer to VG95234M for dimensions D3, D4, D5, D6, D7, K, L5, L6 and L7.
MATERIALS
SHELLS INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
CRIMP CONTACTS
Copper Alloy with Silver Plating Over Nickel
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
Thermal Shock -55°C + 125°C
Salt Spray After
Thermal Shock 500 hour
Electrical Conductivity Very Good
Abrasion Resistance Very Good
