GLZ Series ZENER DIODES VZ : 3.3 to 39V PD : 500mW MiniMELF (SOD-80C) Cathode Mark 0.063 (1.64) FEATURES : * Silicon Planar Zener Diodes * In MiniMELF case especially for automatic insertion * The Zener voltages are graded according to voltage bands instead of by tolerance. * Low Zener impedance and low leakage current * Pb / RoHS Free 0.055 (1.40) 0.019(0.48) 0.011(0.28) 0.142(3.6) 0.134(3.4) Dimensions in inches and ( millimeters ) MECHANICAL DATA : * Case : MiniMELF Glass Case (SOD-80C) * Weight : 0.05 gram (approximately) Maximum Ratings and Thermal Characteristics Rating at 25 C ambient temperature unless otherwise specified. Parameter Symbol Value Unit PD 500 mW Zener Current see Table "Characteristics" Power Dissipation Thermal Resistance Junction to Ambient Air RJA 300 C/W 1) Junction Temperature Range TJ 175 C Storage Temperature Range TSTG - 55 to + 175 C Note : 1) Valid provided that electrodes are kept at ambient temperature. Page 1 of 3 Rev. 02 : March 25, 2005 ELECTRICAL CHARACTERISTICS Rating at 25 C ambient temperature unless otherwise specified Zener Voltage Type GLZ3.3 GLZ3.6 GLZ3.9 GLZ4.3 GLZ4.7 GLZ5.1 GLZ5.6 GLZ6.2 GLZ6.8 GLZ7.5 GLZ8.2 GLZ9.1 GLZ10 Rank Vz (V) at IZT min. max. A B A B A B A B C A B C A B C A B C A B C A B C A B C 3.160 3.320 3.455 3.600 3.74 3.89 4.04 4.17 4.30 4.44 4.55 4.68 4.81 4.94 5.09 5.28 5.45 5.61 5.78 5.96 6.12 6.29 6.49 6.66 6.85 7.07 6.29 3.380 3.530 3.695 3.845 4.01 4.16 4.29 4.43 4.57 4.68 4.80 4.93 5.07 5.20 5.37 5.55 5.73 5.91 6.09 6.27 6.44 6.63 6.83 7.01 7.22 7.45 7.67 A B C 7.53 7.78 8.03 7.92 8.19 8.45 A 8.29 8.73 B C A 8.57 8.83 9.12 9.01 9.30 9.59 B 9.41 9.90 C D A 9.70 9.94 10.18 10.20 10.44 10.71 Test Current IZT (mA) Maximum Zener Impedance , f = 1kHz ZZT @ IZT ZZK @ IZK IZK (mA) () () Maximum Reverse Current IR at VR (V) (A) 20 70 1000 1 20 1 20 60 1000 1 10 1 20 50 1000 1 5 1 20 40 1000 1 5 1 20 25 900 1 5 1 20 20 800 1 5 1.5 20 13 500 1 5 2.5 20 10 300 1 5 3 20 8 150 0.5 2 3.5 20 8 120 0.5 0.5 4 20 8 120 0.5 0.5 5 20 8 120 0.5 0.5 6 20 8 120 0.5 0.2 7 GLZ11 B 10.50 11.05 20 10 120 0.5 0.2 8 GLZ12 C A B 10.82 11.13 11.44 11.38 11.71 12.03 20 12 110 0.5 0.2 9 GLZ13 C A B 11.74 12.11 12.55 12.35 12.75 13.21 10 14 110 0.5 0.2 10 C 12.99 13.66 Page 2 of 3 Rev. 02 : March 25, 2005 ELECTRICAL CHARACTERISTICS Rating at 25 C ambient temperature unless otherwise specified Zener Voltage Type GLZ15 GLZ16 GLZ18 GLZ20 GLZ22 GLZ24 GLZ27 GLZ30 GLZ33 GLZ36 GLZ39 Rank Vz (V) at IZT min. max. A B C A B C A B C A B C D A B C D A B C D A B C D A B 13.45 13.89 14.35 14.80 15.25 15.69 16.22 16.82 17.42 18.02 18.63 19.23 19.72 20.15 20.64 21.08 21.52 22.05 22.61 23.12 23.63 24.26 24.97 25.63 26.29 26.99 27.70 14.13 14.62 15.09 15.57 16.04 16.51 17.06 17.70 18.33 18.96 19.59 20.22 20.72 21.20 21.71 22.17 22.63 23.18 23.77 24.31 24.85 25.52 26.26 26.95 27.54 28.39 29.13 C D A 28.36 29.20 29.68 29.82 30.51 31.22 B 30.32 31.88 C D A 30.90 31.49 31.14 32.50 33.11 33.79 B 32.76 34.49 C D A 33.40 34.01 34.68 35.13 35.77 36.47 B 35.36 37.19 C D 36.00 36.63 37.85 38.52 Test Current IZT (mA) Maximum Zener Impedance , f = 1kHz ZZT @ IZT ZZK @ IZK IZK (mA) () () Maximum Reverse Current IR at VR (V) (A) 10 16 110 0.5 0.2 11 10 18 150 0.5 0.2 12 10 23 150 0.5 0.2 13 10 28 200 0.5 0.2 15 5 30 200 0.5 0.2 17 5 35 200 0.5 0.2 19 5 45 200 0.5 0.2 21 5 55 250 0.5 0.2 23 5 65 250 0.5 0.2 25 5 75 250 0.5 0.2 27 5 85 250 0.5 0.2 30 Notes: (1) The Zener voltage is measured 40ms after power is supplied. (2) Specify Zener voltage rank (A, B, C, or D) when ordering parts Page 3 of 3 Rev. 02 : March 25, 2005