• All specifications are subject to change without notice.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
Inductors for Decoupling Circuits
Wound/For Current
NLCV/NLC series
Type:
Issue date:
NLCV25 2520[1008 inch]*
NLCV32 3225[1210 inch]
NLCV25T-R 2520[1008 inch]
NLCV32T-R 3225[1210 inch]
NLC453232 4532[1812 inch]
NLC565050 5650[2220 inch]
* Dimensions Code JIS[EIA]
September 2011
(1/14)
001-03 / 20110927 / e511_nlcv_nlc
• All specifications are subject to change without notice.
Inductors for Decoupling Circuits
Wound/For Current
NLCV Series NLCV25
FEATURES
• The product has good heat durability that withstands lead-free
compatible reflow soldering conditions.
• Lead-free material is used for the plating on the terminal
• The electrical characteristics, reliability, shape and pad shape
are the same as the previous NL series.
• The product uses metal terminals, which realize excellent
connection reliability.
• Highly heat resistant thermoplastic resin is used to form the
exterior package.
• From 1µH to 33µH, all of the products are available in the E-6
series.
• This product is in compliance with the RoHS Directive. Other
products with specifications that do not include exemption
regulations are also available.
APPLICATIONS
• Audio-visual equipment including TVs, VCRs and digital
cameras.
• Electronic equipment used in communication infrastructures
including xDSL and mobile base stations.
• Electronic equipment used in onboard automobile equipment
including car audio and ECU systems.
• Other electronic equipment including HDDs and ODDs.
SPECIFICATIONS
RECOMMENDED SOLDERING CONDITIONS
REFLOW SOLDERING
FLOW SOLDERING
IRON SOLDERING
•Based on the above conditions, use a maximum product temperature of
260°C and a maximum accumulated heating time of 10 seconds as a
guideline.
• Please contact us for details.
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions
(3) Packaging style
(4) Inductance value
(5) Inductance tolerance
(6) Lead-free compatible product
PACKAGING STYLE AND QUANTITIES
Conformity to RoHS Directive
Operating temperature range –40 to +105°C
[Including self-temperature rise]
Storage temperature range –40 to +105°C
150˚C
180˚C
255˚C
230˚C
Pre-heating
90 to 120s 40s max.
10s max.
Natural
cooling
Time(s)
Tip temperature 300 to 350°C
Heating time 3 seconds/soldering
Soldering rod specifications Output: 30W Tip diameter: approx.1mm
NLCV 25 T- 2R2 M - PF
(1) (2) (3) (4) (5) (6)
25 2.5×2.0×1.8mm (L×W×T)
T Taping (reel)
1R0 1µH
220 22µH
K±10%
M±20%
PF Conformity to RoHS directive,
exemption regulations apply
EF Conformity to RoHS directive
Packaging style Quantity
Taping 2000 pieces/reel
150˚C
170˚C
260˚C max.
Pre-heating
60 to 120s
10s max.
Natural
cooling
Time(s)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(2/14)
001-03 / 20110927 / e511_nlcv_nlc
• All specifications are subject to change without notice.
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN
ELECTRICAL CHARACTERISTICS
∗1Rated current: Value obtained when current flows and the temperature has risen to 20°C or when DC current flows and the initial value of inductance has
fallen by 10%, whichever is smaller.
∗2: Please specify lead-free compatible product, PF (Conformity to RoHS directive, exemption regulations apply) or EF (Conformity to RoHS directive)
• Test equipment L, Q: HP4194A IMPEDANCE/GAIN PHASE ANALYZER+HP16085A+HP16093 B+TF-1
SRF: HP8753C NETWORK ANALYZER
Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE CHANGE vs. DC SUPERPOSITION IMPEDANCE vs. FREQUENCY CHARACTERISTICS
CHARACTERISTICS
Inductance(µH) Inductance
tolerance
Q
ref.
Test frequency L,Q
(MHz)
Self-resonant
frequency
(MHz)min.
DC resistance
(Ω)±30%
Rated current∗1
(mA)max. Part No.
1 ±20% 20 7.96 200 0.34 475 NLCV25T-1R0M- ∗2
1.5 ±20% 20 7.96 165 0.42 435 NLCV25T-1R5M-
2.2 ±20% 20 7.96 95 0.5 390 NLCV25T-2R2M-
3.3 ±20% 20 7.96 55 0.65 340 NLCV25T-3R3M-
4.7 ±20% 20 7.96 43 0.8 285 NLCV25T-4R7M-
6.8 ±20% 20 7.96 39 1 275 NLCV25T-6R8M-
10 ±10% 30 2.52 32 1.69 210 NLCV25T-100K-
15 ±10% 30 2.52 21 2.2 175 NLCV25T-150K-
22 ±10% 30 2.52 18 2.8 160 NLCV25T-220K-
33 ±10% 30 2.52 16 4.2 120 NLCV25T-330K-
2.5±0.2 2±0.1
1.8±0.1
0.5
(0.4)
Terminal
electrode
1.4±0.1 Weight:25mg
1.5
Inductor
Solder land pattern
1.01.51.0 Dimensions in mm
10 30 100 300 1000 3000 10000
DC current(mA)
Inductance(µH)
0.1
0.3
1
3
10
30
100
22µH
10µH
4.7µH
2.2µH
1µH
13 10 30 100 300 1000
Frequency(MHz)
Impedance(kΩ)
0.1
0.3
1
3
10
30
100
22µH
10µH
4.7µH
2.2µH
1µH
(3/14)
001-03 / 20110927 / e511_nlcv_nlc
• All specifications are subject to change without notice.
Inductors for Decoupling Circuits
Wound/For Current
NLCV Series NLCV32
FEATURES
• This is a renewed version of NLC322522.
• The product has good heat durability that withstands lead-free
compatible reflow soldering conditions.
• Lead-free material is used for the plating on the terminal
• The electrical characteristics, reliability, shape and pad shape
are the same as the previous NL series.
• The product uses metal terminals, which realize excellent
connection reliability.
• Highly heat resistant thermoplastic resin is used to form the
exterior package.
• From 1.0µH to 330µH, all of the products are available.
• This product is in compliance with the RoHS Directive. Other
products with specifications that do not include exemption
regulations are also available.
APPLICATIONS
• Audio-visual equipment including TVs, VCRs and digital
cameras.
• Electronic equipment used in communication infrastructures
including xDSL and mobile base stations.
• Electronic equipment used in onboard automobile equipment
including car audio and ECU systems.
• Other electronic equipment including HDDs and ODDs.
SPECIFICATIONS
RECOMMENDED SOLDERING CONDITIONS
REFLOW SOLDERING
FLOW SOLDERING
IRON SOLDERING
•Based on the above conditions, use a maximum product temperature of
260°C and a maximum accumulated heating time of 10 seconds as a
guideline.
• Please contact us for details.
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions
(3) Packaging style
(4) Inductance value
(5) Inductance tolerance
(6) Lead-free compatible product
PACKAGING STYLE AND QUANTITIES
Conformity to RoHS Directive
Operating temperature range –40 to +105°C
[Including self-temperature rise]
Storage temperature range –40 to +105°C
150˚C
180˚C
255˚C
230˚C
Pre-heating
90 to 120s 40s max.
10s max.
Natural
cooling
Time(s)
Tip temperature 300 to 350°C
Heating time 3 seconds/soldering
Soldering rod specifications Output: 30W Tip diameter: approx.1mm
NLCV 32 T- 2R2 M - PF
(1) (2) (3) (4) (5) (6)
32 3.2×2.5×2.2mm (L×W×T)
T Taping (reel)
1R0 1µH
100 10µH
101 100µH
K±10%
M±20%
PF Conformity to RoHS directive,
exemption regulations apply
EF Conformity to RoHS directive
Packaging style Quantity
Taping 2000 pieces/reel
150˚C
170˚C
260˚C max.
Pre-heating
60 to 120s
10s max.
Natural
cooling
Time(s)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(4/14)
001-03 / 20110927 / e511_nlcv_nlc
• All specifications are subject to change without notice.
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN
ELECTRICAL CHARACTERISTICS
∗1Rated current: Value obtained when current flows and the temperature has risen to 20°C or when DC current flows and the initial value of inductance has
fallen by 10%, whichever is smaller.
∗2: Please specify lead-free compatible product, PF (Conformity to RoHS directive, exemption regulations apply) or EF (Conformity to RoHS directive)
• Test equipment L, Q: YHP4194A IMPEDANCE ANALYZER+YHP16085A+YHP16093B+TF-1, or equivalent
SRF: HP8753C NETWORK ANALYZER
Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER, or equivalent
TYPICAL ELECTRICAL CHARACTERISTICS
Inductance
(µH)
Inductance
tolerance
Q
ref.
Test frequency L,Q
(MHz)
Self-resonant frequency
(MHz)min.
DC resistance
(Ω)±30%
Rated current∗1
(mA)max. Part No.
1 ±20% 10 7.96 100 0.06 1000 NLCV32T-1R0M- ∗2
1.5 ±20% 10 7.96 80 0.11 830 NLCV32T-1R5M-
2.2 ±20% 10 7.96 68 0.13 770 NLCV32T-2R2M-
3.3 ±20% 10 7.96 54 0.16 690 NLCV32T-3R3M-
4.7 ±20% 15 7.96 46 0.2 620 NLCV32T-4R7M-
6.8 ±20% 15 7.96 38 0.27 530 NLCV32T-6R8M-
10 ±10% 15 2.52 30 0.36 450 NLCV32T-100K-
15 ±10% 15 2.52 26 0.56 370 NLCV32T-150K-
22 ±10% 15 2.52 21 0.77 300 NLCV32T-220K-
33 ±10% 15 2.52 17 1.1 240 NLCV32T-330K-
47 ±10% 15 2.52 14 1.64 180 NLCV32T-470K-
68 ±10% 15 2.52 12 2.8 140 NLCV32T-680K-
100 ±10% 15 0.796 10 3.7 120 NLCV32T-101K-
150 ±10% 20 0.796 8 6.1 100 NLCV32T-151K-
220 ±10% 20 0.796 7 8.4 80 NLCV32T-221K-
330 ±10% 20 0.796 6 12.3 70 NLCV32T-331K-
3.2±0.2
1R0
2.5±0.2
1.9±0.1 Weight: 50mg
2.2±0.2
0.5
(0.4)
Terminal
electrode
Solder land patternInductor
2
1.2 1.22
Dimensions in mm
(5/14)
001-03 / 20110927 / e511_nlcv_nlc
• All specifications are subject to change without notice.
INDUCTANCE CHANGE vs. DC SUPERPOSITION
CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
5 10 50 500100 1000
5
10
1
50
100
500
1000
Inductance(µH)
DC current(mA)
47µH
22µH
330µH
220µH
100µH
10µH
1µH
Frequency(MHz)
10.5 105 10050
0.1
1
10
5
0.5
100
50
500
Impedance(kΩ)
330µH
220µH
100µH
47µH
22µH
4.7µH
10µH
1µH
(5/14)
001-03 / 20110927 / e511_nlcv_nlc
• All specifications are subject to change without notice.
Inductors for Decoupling Circuits
Wound/For Current
NLCV Series NLCV25T-R
FEATURES
• Rated current is maintained in the range of 1.7 to 2.0 times
compared to the existing NLCV25 series.
• Stable inductance, as the inductance change in the maximum
rated current load is within –10%.
• Maximum operating temperature is +125°C (including self-
temperature rise).
• Lead-free material is adopted for terminal soldering.
• PC board pattern is compatible with the existing NLCV25 series.
• This product is in compliance with the RoHS Directive. Other
products with specifications that do not include exemption
regulations are also available.
APPLICATIONS
Power supply lines, audio visual systems, electronic equipment for
vehicle, IT equipment
SPECIFICATIONS
RECOMMENDED SOLDERING CONDITIONS
REFLOW SOLDERING
FLOW SOLDERING
IRON SOLDERING
•Based on the above conditions, use a maximum product temperature of
260°C and a maximum accumulated heating time of 10 seconds as a
guideline.
• Please contact us for details.
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions
(3) Packaging style
(4) Inductance
(5) Inductance tolerance
(6) Lead-free compatible product
(7) TDK internal code
Conformity to RoHS Directive
Operating temperature range –40 to +125°C
[Including self-temperature rise]
Storage temperature range –40 to +125°C
150˚C
180˚C
255˚C
230˚C
Pre-heating
90 to 120s 40s max.
10s max.
Natural
cooling
Time(s)
150˚C
170˚C
260˚C max.
Pre-heating
60 to 120s
10s max.
Natural
cooling
Time(s)
Tip temperature 300 to 350°C
Heating time 3 seconds/soldering
Soldering rod specifications Output: 30W Tip diameter: 1mm
NLCV 25 T R10 M -PF R
(1) (2) (3) (4) (5) (6) (7)
25 2.5×2.0×1.8mm(L×W×T)
T Taping (reel)
R10 0.1µH
1R0 1µH
100 10µH
K±10%
M±20%
PF Conformity to RoHS directive,
exemption regulations apply
EF Conformity to RoHS directive
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(6/14)
001-03 / 20110927 / e511_nlcv_nlc
• All specifications are subject to change without notice.
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN
ELECTRICAL CHARACTERISTICS
∗ : Please specify lead-free compatible product, PF (Conformity to RoHS directive, exemption regulations apply) or EF (Conformity to RoHS directive)
• Test equipment L, Q: HP4194A IMPEDANCE ANALYZER+16085A+16093B+TF-1
SRF: HP8753C NETWORK ANALYZER
Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE vs. FREQUENCY CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
INDUCTANCE vs. DC SUPERPOSITION CHARACTERISTICS
Inductance
(µH)
Inductance
tolerance
Q
ref.
Test frequency L,Q
(MHz)
Self-resonant
frequency
(MHz)min.
DC resistance
(Ω)±20%
Rated current
(mA)max. Part No.
0.1 ±20% 5 25.2 800 0.04 1890 NLCV25T-R10M- ∗R
0.15 ±20% 5 25.2 500 0.044 1800 NLCV25T-R15M- R
0.22 ±20% 5 25.2 400 0.05 1690 NLCV25T-R22M- R
0.33 ±20% 5 25.2 300 0.065 1480 NLCV25T-R33M- R
0.47 ±20% 5 25.2 220 0.08 1340 NLCV25T-R47M- R
0.68 ±20% 5 25.2 160 0.09 1260 NLCV25T-R68M- R
1 ±20% 10 7.96 100 0.14 1000 NLCV25T-1R0M- R
1.5 ±20% 10 7.96 80 0.18 890 NLCV25T-1R5M- R
2.2 ±20% 10 7.96 68 0.27 730 NLCV25T-2R2M- R
3.3 ±20% 10 7.96 54 0.44 570 NLCV25T-3R3M- R
4.7 ±20% 10 7.96 46 0.57 500 NLCV25T-4R7M- R
6.8 ±20% 10 7.96 38 0.92 390 NLCV25T-6R8M- R
10 ±10% 15 2.52 30 1.1 360 NLCV25T-100K- R
2.5±0.2 2±0.1
1.8±0.1
0.5
(0.4)
Terminal
electrode
1.4±0.1 Weight:25mg
1.5
Inductor
Solder land pattern
1.01.51.0 Dimensions in mm
0.01
100
10
0.1
1
1 10 100
Frequency(MHz)
4.7µH
2.2µH
1µH
0.47µH
0.22µH
0.1µH
10µH
Inductance(µH)
1
1
10
100000
10000
1000
100
10 100
Impedance(Ω)
Frequency(MHz)
4.7µH
2.2µH
1µH
0.47µH
0.22µH
0.1µH
10µH
1 10 100 1000 10000
DC current(mA)
0.01
100
10
0.1
1
Inductance(µH)
4.7µH
2.2µH
1µH
0.47µH
0.22µH
0.1µH
10µH
(7/14)
001-03 / 20110927 / e511_nlcv_nlc
• All specifications are subject to change without notice.
Inductors for Decoupling Circuits
Wound/For Current
NLCV Series NLCV32T-R
FEATURES
• Rated current is maintained in the range of 1.4 to 2.0 times
compared to the existing NLCV32 series.
• Stable inductance, as the inductance change in the maximum
rated current load is within –10%.
• Maximum operating temperature is +125°C (including self-
temperature rise).
• Lead-free material is adopted for terminal soldering.
• PC board pattern is compatible with the existing NLCV32 series.
• This product is in compliance with the RoHS Directive. Other
products with specifications that do not include exemption
regulations are also available.
APPLICATIONS
Power supply lines, audio visual systems, electronic equipment for
vehicle, IT equipment
SPECIFICATIONS
RECOMMENDED SOLDERING CONDITIONS
REFLOW SOLDERING
FLOW SOLDERING
IRON SOLDERING
•Based on the above conditions, use a maximum product temperature of
260°C and a maximum accumulated heating time of 10 seconds as a
guideline.
• Please contact us for details.
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions
(3) Packaging style
(4) Inductance
(5) Inductance tolerance
(6) Lead-free compatible product
(7) TDK internal code
Conformity to RoHS Directive
Operating temperature range –40 to +125°C
[Including self-temperature rise]
Storage temperature range –40 to +125°C
150˚C
180˚C
255˚C
230˚C
Pre-heating
90 to 120s 40s max.
10s max.
Natural
cooling
Time(s)
150˚C
170˚C
260˚C max.
Pre-heating
60 to 120s
10s max.
Natural
cooling
Time(s)
Tip temperature 300 to 350°C
Heating time 3 seconds/soldering
Soldering rod specifications Output: 30W Tip diameter: 1mm
NLCV 32 T R10 M -PF R
(1) (2) (3) (4) (5) (6) (7)
32 3.2×2.5×2.2mm(L×W×T)
T Taping (reel)
R10 0.1µH
1R0 1µH
100 10µH
K±10%
M±20%
PF Conformity to RoHS directive,
exemption regulations apply
EF Conformity to RoHS directive
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(8/14)
001-03 / 20110927 / e511_nlcv_nlc
• All specifications are subject to change without notice.
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN
ELECTRICAL CHARACTERISTICS
∗ : Please specify lead-free compatible product, PF (Conformity to RoHS directive, exemption regulations apply) or EF (Conformity to RoHS directive)
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE vs. FREQUENCY CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
INDUCTANCE vs. DC SUPERPOSITION CHARACTERISTICS
Inductance
(µH)
Inductance
tolerance
Q
ref.
Test frequency L,Q
(MHz)
Self-resonant
frequency
(MHz)min.
DC resistance
(Ω)±20%
Rated current
(mA)max. Part No.
0.1 ±20% 10 25.2 800 0.02 2850 NLCV32T-R10M- ∗R
0.15 ±20% 10 25.2 500 0.024 2600 NLCV32T-R15M- R
0.22 ±20% 10 25.2 400 0.027 2400 NLCV32T-R22M- R
0.33 ±20% 10 25.2 300 0.035 2100 NLCV32T-R33M- R
0.47 ±20% 10 25.2 250 0.038 2000 NLCV32T-R47M- R
0.68 ±20% 10 25.2 180 0.045 1900 NLCV32T-R68M- R
1 ±20% 15 7.96 100 0.055 1700 NLCV32T-1R0M- R
1.5 ±20% 15 7.96 80 0.095 1400 NLCV32T-1R5M- R
2.2 ±20% 15 7.96 68 0.115 1200 NLCV32T-2R2M- R
3.3 ±20% 15 7.96 54 0.16 1000 NLCV32T-3R3M- R
4.7 ±20% 15 7.96 46 0.2 900 NLCV32T-4R7M- R
6.8 ±20% 15 7.96 38 0.29 700 NLCV32T-6R8M- R
10 ±10% 20 2.52 30 0.42 600 NLCV32T-100K- R
3.2±0.2 2.5±0.2
2.2±0.2
0.5
(0.4)
Terminal
electrode
1.9±0.1
100
Weight: 50mg
2
Inductor
Pattern
1.221.2 Dimensions in mm
1
0.01
100
10
0.1
1
10 100
Inductance(µH)
Frequency(MHz)
4.7µH
2.2µH
1µH
0.47µH
0.22µH
0.1µH
10µH
1
1
10
100000
10000
1000
100
10 100
Impedance(Ω)
Frequency(MHz)
4.7µH
2.2µH
1µH
0.47µH
0.22µH
0.1µH
10µH
1 10 100 1000 10000
DC current(mA)
0.01
100
10
0.1
1
Inductance(µH)
4.7µH
2.2µH
1µH
0.47µH
0.22µH
0.1µH
10µH
(9/14)
001-03 / 20110927 / e511_nlcv_nlc
• All specifications are subject to change without notice.
Inductors for Decoupling Circuits
Wound/For Current
NLC Series NLC453232
FEATURES
• The NLC series feature low DC resistance and high current
handling capacities, making them ideal for power supply line
applications.
• The product has good heat durability that withstands lead-free
compatible reflow soldering conditions.
• Lead-free material is used for the plating on the terminal.
• The product uses metal terminals, which realize excellent
connection reliability.
• From 1µH to 330µH, all of the products in the E-12 series are
K(±10%) tolerance products.
• It is a product conforming to RoHS directive.
APPLICATIONS
• Electronic equipment used in communication infrastructures
including xDSL and mobile base stations.
• Audio-visual equipment including TVs and VCRs.
• Other electronic equipment including HDDs and ODDs.
SPECIFICATIONS
RECOMMENDED SOLDERING CONDITIONS
REFLOW SOLDERING
FLOW SOLDERING
IRON SOLDERING
•Based on the above conditions, use a maximum product temperature of
260°C and a maximum accumulated heating time of 10 seconds as a
guideline.
• Please contact us for details.
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions
(3) Packaging style
(4) Inductance value
(5) Inductance tolerance
(6) Lead-free compatible product
PACKAGING STYLE AND QUANTITIES
Conformity to RoHS Directive
Operating temperature range –40 to +105°C
[Including self-temperature rise]
Storage temperature range –40 to +105°C
150˚C
180˚C
255˚C
230˚C
Pre-heating
90 to 120s 40s max.
10s max.
Natural
cooling
Time(s)
150˚C
170˚C
260˚C max.
Pre-heating
60 to 120s
10s max.
Natural
cooling
Time(s)
Tip temperature 300 to 350°C
Heating time 3 seconds/soldering
Soldering rod specifications Output: 30W Tip diameter: 1mm
NLC 453232 T- 2R2 K - PF
(1) (2) (3) (4) (5) (6)
453232 4.5×3.2×3.2mm (L×W×T)
T Taping (reel)
1R0 1µH
100 10µH
101 100µH
K±10%
PF Lead-free compatible product
Packaging style Quantity
Taping 500 pieces/reel
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(10/14)
001-03 / 20110927 / e511_nlcv_nlc
• All specifications are subject to change without notice.
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN
ELECTRICAL CHARACTERISTICS
∗Rated current: Value obtained when current flows and the temperature has risen to 20°C or when DC current flows and the initial value of inductance has
fallen by 10%, whichever is smaller.
• Test equipment L, Q: YHP4194A IMPEDANCE ANALYZER+YHP16085A+YHP16093B+TF-1, or equivalent
SRF: HP8753C NETWORK ANALYZER (Zin=Zout=50Ω), or equivalent
Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER, or equivalent
Inductance
(µH)
Inductance
tolerance
Q
min.
Test frequency
L, Q (MHz)
Self-resonant
frequency (MHz)min.
DC resistance
(Ω)max.
Rated current∗
(mA)max. Part No.
1 ±10% 10 7.96 200 0.11 1050 NLC453232T-1R0K-PF
1.2 ±10% 10 7.96 160 0.12 1000 NLC453232T-1R2K-PF
1.5 ±10% 10 7.96 130 0.15 950 NLC453232T-1R5K-PF
1.8 ±10% 10 7.96 100 0.16 900 NLC453232T-1R8K-PF
2.2 ±10% 10 7.96 80 0.18 850 NLC453232T-2R2K-PF
2.7 ±10% 10 7.96 60 0.2 800 NLC453232T-2R7K-PF
3.3 ±10% 10 7.96 45 0.22 750 NLC453232T-3R3K-PF
3.9 ±10% 10 7.96 40 0.24 700 NLC453232T-3R9K-PF
4.7 ±10% 10 7.96 35 0.27 650 NLC453232T-4R7K-PF
5.6 ±10% 10 7.96 30 0.3 650 NLC453232T-5R6K-PF
6.8 ±10% 10 7.96 28 0.35 600 NLC453232T-6R8K-PF
8.2 ±10% 10 7.96 25 0.4 600 NLC453232T-8R2K-PF
10 ±10% 10 2.52 22 0.5 550 NLC453232T-100K-PF
12 ±10% 10 2.52 21 0.6 500 NLC453232T-120K-PF
15 ±10% 10 2.52 20 0.7 450 NLC453232T-150K-PF
18 ±10% 10 2.52 19 0.8 400 NLC453232T-180K-PF
22 ±10% 10 2.52 18 0.9 370 NLC453232T-220K-PF
27 ±10% 10 2.52 16 1.2 330 NLC453232T-270K-PF
33 ±10% 10 2.52 14 1.4 300 NLC453232T-330K-PF
39 ±10% 10 2.52 12 1.6 280 NLC453232T-390K-PF
47 ±10% 10 2.52 11.5 1.9 260 NLC453232T-470K-PF
56 ±10% 10 2.52 11 2.2 240 NLC453232T-560K-PF
68 ±10% 10 2.52 10 2.6 220 NLC453232T-680K-PF
82 ±10% 10 2.52 9 3.5 200 NLC453232T-820K-PF
100 ±10% 20 0.796 8 4 180 NLC453232T-101K-PF
120 ±10% 20 0.796 7.5 4.5 160 NLC453232T-121K-PF
150 ±10% 20 0.796 7 6.5 140 NLC453232T-151K-PF
180 ±10% 20 0.796 6.5 7.5 120 NLC453232T-181K-PF
220 ±10% 20 0.796 5.5 9 120 NLC453232T-221K-PF
270 ±10% 20 0.796 5 11 100 NLC453232T-271K-PF
330 ±10% 20 0.796 4 13 90 NLC453232T-331K-PF
120
C0.5
R0.2
4.5±0.3 3.2±0.2
2.6±0.1 Weight: 180mg
3.2±0.2
0.5
(0.6)
Terminal
electrode
Solder land patternInductor
2.8
1.5 1.53
Dimensions in mm
(11/14)
001-03 / 20110927 / e511_nlcv_nlc
• All specifications are subject to change without notice.
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE CHANGE vs. DC SUPERPOSITION
CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
0.1
1
10
100
1000
Inductance(µH)
0 100 1000 10000
DC current(mA)
220µH
100µH
47µH
22µH
10µH
3.9µH
1µH
A
L=5H C=20000µF
Test circuit
DC
Universal
bridge
Specimen
YHP model-4275A
or equivalent
0.1
1
10
5
0.5
100
50
Frequency(MHz)
0.1 10.5 105
Impedance(kΩ)
Test equipment:
4194A IMPEDANCE/
GAIN-PHASE ANALYZER
(16092A FIXTURE)
1µH
3.9µH
10µH
100µH
22µH
220µH
• All specifications are subject to change without notice.
(12/14)
001-03 / 20110927 / e511_nlcv_nlc
Inductors for Decoupling Circuits
Wound/For Current
NLC Series NLC565050
FEATURES
• The NLC series feature low DC resistance and high current
handling capacities, making them ideal for power supply line
applications.
• The product has good heat durability that withstands lead-free
compatible reflow soldering conditions.
• Lead-free material is used for the plating on the terminal.
• The product uses metal terminals, which realize excellent
connection reliability.
• From 1µH to 1000µH, all of the products in the E-12 series are
K(±10%) tolerance products.
• It is a product conforming to RoHS directive.
APPLICATIONS
• Electronic equipment used in communication infrastructures
including xDSL and mobile base stations.
• Audio-visual equipment including TVs and VCRs.
• Other electronic equipment including HDDs and ODDs.
SPECIFICATIONS
RECOMMENDED SOLDERING CONDITIONS
REFLOW SOLDERING
FLOW SOLDERING
IRON SOLDERING
•Based on the above conditions, use a maximum product temperature of
260°C and a maximum accumulated heating time of 10 seconds as a
guideline.
• Please contact us for details.
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions
(3) Packaging style
(4) Inductance value
(5) Inductance tolerance
(6) Lead-free compatible product
PACKAGING STYLE AND QUANTITIES
Conformity to RoHS Directive
Operating temperature range –40 to +105°C
[Including self-temperature rise]
Storage temperature range –40 to +105°C
150˚C
180˚C
255˚C
230˚C
Pre-heating
90 to 120s 40s max.
10s max.
Natural
cooling
Time(s)
150˚C
170˚C
260˚C max.
Pre-heating
60 to 120s
10s max.
Natural
cooling
Time(s)
Tip temperature 300 to 350°C
Heating time 3 seconds/soldering
Soldering rod specifications Output: 30W Tip diameter: 1mm
NLC 565050 T- 2R2 K - PF
(1) (2) (3) (4) (5) (6)
565050 5.6×5.0×5.0mm(L×W×T)
T Taping(reel)
1R0 1µH
100 10µH
101 100µH
102 1000µH
K±10%
PF Lead-free compatible product
Packaging style Quantity
Taping 400 pieces/reel
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
(13/14)
001-03 / 20110927 / e511_nlcv_nlc
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN
ELECTRICAL CHARACTERISTICS
∗Rated current: Value obtained when current flows and the temperature has risen to 20°C or when DC current flows and the initial value of inductance has
fallen by 10%, whichever is smaller.
• Test equipment L, Q: YHP4194A IMPEDANCE ANALYZER+YHP16085A+YHP16093B+TF-1, or equivalent
SRF: HP8753C NETWORK ANALYZER (Zin=Zout=50Ω), or equivalent
Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER, or equivalent
Inductance
(µH)
Inductance
tolerance
Q
min.
Test frequency
L, Q (MHz)
Self-resonant
frequency (MHz)min.
DC resistance
(Ω)max.
Rated current∗
(mA)max. Part No.
1 ±10% 10 7.96 95 0.03 1800 NLC565050T-1R0K-PF
1.2 ±10% 10 7.96 70 0.035 1700 NLC565050T-1R2K-PF
1.5 ±10% 10 7.96 55 0.04 1600 NLC565050T-1R5K-PF
1.8 ±10% 10 7.96 47 0.05 1400 NLC565050T-1R8K-PF
2.2 ±10% 10 7.96 42 0.06 1300 NLC565050T-2R2K-PF
2.7 ±10% 10 7.96 37 0.07 1200 NLC565050T-2R7K-PF
3.3 ±10% 10 7.96 34 0.08 1120 NLC565050T-3R3K-PF
3.9 ±10% 10 7.96 32 0.09 1050 NLC565050T-3R9K-PF
4.7 ±10% 10 7.96 29 0.11 950 NLC565050T-4R7K-PF
5.6 ±10% 10 7.96 26 0.13 880 NLC565050T-5R6K-PF
6.8 ±10% 10 7.96 24 0.15 810 NLC565050T-6R8K-PF
8.2 ±10% 10 7.96 22 0.18 750 NLC565050T-8R2K-PF
10 ±10% 10 2.52 19 0.21 690 NLC565050T-100K-PF
12 ±10% 10 2.52 17 0.25 630 NLC565050T-120K-PF
15 ±10% 10 2.52 16 0.3 580 NLC565050T-150K-PF
18 ±10% 10 2.52 14 0.36 530 NLC565050T-180K-PF
22 ±10% 10 2.52 13 0.43 480 NLC565050T-220K-PF
27 ±10% 10 2.52 11.5 0.52 440 NLC565050T-270K-PF
33 ±10% 10 2.52 10.5 0.62 400 NLC565050T-330K-PF
39 ±10% 10 2.52 9.5 0.72 370 NLC565050T-390K-PF
47 ±10% 10 2.52 8.5 0.85 340 NLC565050T-470K-PF
56 ±10% 10 2.52 7.8 1 310 NLC565050T-560K-PF
68 ±10% 10 2.52 7 1.2 290 NLC565050T-680K-PF
82 ±10% 10 2.52 6.4 1.4 270 NLC565050T-820K-PF
100 ±10% 20 0.796 6 1.6 250 NLC565050T-101K-PF
120 ±10% 20 0.796 5.4 1.9 230 NLC565050T-121K-PF
150 ±10% 20 0.796 4.8 2.2 210 NLC565050T-151K-PF
180 ±10% 20 0.796 4.4 2.8 190 NLC565050T-181K-PF
220 ±10% 20 0.796 3.9 3.4 170 NLC565050T-221K-PF
270 ±10% 20 0.796 3.6 4.2 155 NLC565050T-271K-PF
330 ±10% 20 0.796 3.2 4.9 140 NLC565050T-331K-PF
390 ±10% 20 0.796 2.9 5.8 130 NLC565050T-391K-PF
470 ±10% 20 0.796 2.6 7 120 NLC565050T-471K-PF
560 ±10% 20 0.796 2.4 8.5 110 NLC565050T-561K-PF
680 ±10% 20 0.796 2.2 10 100 NLC565050T-681K-PF
820 ±10% 20 0.796 2 13 90 NLC565050T-821K-PF
1000 ±10% 20 0.252 1.8 15 85 NLC565050T-102K-PF
470
C1
5.6±0.3 5±0.3
4±0.2 Weight: 380mg
5±0.3
1
(0.5)
Terminal
electrode
Solder land patternInductor
4.5
224
Dimensions in mm
• All specifications are subject to change without notice.
(14/14)
001-03 / 20110927 / e511_nlcv_nlc
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE CHANGE vs. DC SUPERPOSITION
CHARACTERISTICS
0.1
1
10
100
1000
Inductance(µH)
0 100 1000 10000
DC current(mA)
1000µH
470µH
220µH
100µH
39µH
15µH
3.9µH
Test equipment:
4275A MULTI-FREQUENCY
LCR METER YHP(10kHz, 1Vrms)
A
L=5H C=20000µF
Test circuit
DC
LCR meter
Specimen
YHP model-4275A
or equivalent
1µH
