279
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Level V IDC Connectors, .125 x .125 [3.18 x 3.18] Centerline
AMPMODU Interconnection System
.125 [3.18] x .125 [3.18]
Centerline
6
Product Facts
■Termination of discrete
wire sizes 26-22 AWG
[0.12-0.3 mm2] as well as
jacketed cable and bonded
ribbon cable (conductors
separated)
■Connectors stackable end-
to-end and side-to-side on
.125 [3.18] centers
■Connectors preloaded with
insulation displacement
receptacle contacts
■Contact design employs
dual cantilever beams,
redundant insulation
displacement slots, built-in
post stop and wire support
crimp
■Copper alloy contacts are
duplex plated
■Snap-on covers with or
without cable tie paddles
■Full line of mass
termination tooling offers
lowest installed costs for
most production needs
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
AMPMODU Level V IDC
connectors provide cost
effective discrete wire
connections that are
compatible with today's
telecommunications
packaging techniques.
These connectors are
designed to mate with .025
[0.64] sq. posts on .125 x
.125 [3.18 x 3.18] centers
and are comprised of
double-row housings
preloaded with insulation
displacement receptacle
contacts, snap-on
hermaphroditic covers, and
a full line of mass termination
tooling to meet virtually
every production need. For
modular flexibility, connectors
can be stacked end-to-end
or side-to-side, maintaining
a .125 x .125 [3.18 x 3.18]
centerline spacing.
Covers can be furnished
with and without a cable tie
paddle. The covers are
simply snapped onto a
housing after the connector
has been terminated.
The receptacle contacts
feature the Tyco Electronics
insulation displacement
crimp technique for
achieving top quality, low
cost terminations. These
contacts employ dual
cantilever beams for
redundant interface with a
mating post, an integral
post stop to limit post
mating depth and protect
the crimp termination, and
a wire support (strain relief)
crimp to prevent accidental
wire pull-out. The contacts
are made of high
conductivity copper alloy
and are duplex plated.
Performance
Characteristics
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.)
Durability — Ref. Product
Specification 108-25028
(Interconnection System, Insulation
Displacement Connector, IDC Level)
Application Specification
114-25020 (Interconnection System,
IDC Level V, Application of)
R
R
280
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Receptacle Assemblies, Double-Row, .125 x .125 [3.18 x 3.18] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
.125 [3.18] x .125 [3.18]
Centerline
6
Housings Preloaded with
Insulation Displacement
Crimp Receptacle Contacts
Material and Finish
Housing — Black thermoplastic, flame
retardant
Contacts — Copper alloy, duplex
plated .000050 [0.00127] gold on
contact area, .000100 [0.00254] min.
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Note: Preloaded contacts accept max.
insulation dia. of .050 [1.27]. The mini-
mum point of contact, as measured from
front edge of housing, is .095 [2.41].
Technical Documents —
pages 277, 278
Product Specification
108-25028
Application Specification
114-25020
Receptacle assemblies can be
stacked end-to-end and side-to-
side on .125 x .125 [3.18 x 3.18]
centers.
A
B
.800
[20.32]
No. of Dimensions Receptacle Assembly (Stamped1)
Pos. for 26-22 AWG
AB [0.12-0.3 mm2] Wire
8.493 [12.52] .375 [9.52] 102935-4
10 .618 [15.70] .500 [12.70] 102935-6
12 .743 [18.87] .625 [15.88] 102935-8
16 .993 [25.22] .875 [22.23] 1-102935-2
20 1.243 [31.57] 1.125 [28.58] 1-102935-6
24 1.493 [37.92] 1.375 [34.93] 1-102935-9
30 1.868 [47.45] 1.750 [44.45] 1-102935-3
32 1.993 [50.62] 1.875 [47.63] 2-102935-8
40 2.493 [63.32] 2.375 [60.33] 3-102935-6
1White ink stamped, one side—8- thru 12-position with AMP and arrow; 14- and 16-position with AMP, part no., and
arrow; 18- thru 40-position with AMP, part no., date code and arrow.
Notes: 1. Covers for these housings are shown on pages 281 & 282.
2. Termination tooling for these connectors are shown on page 273-275.
3. 14- and 18-position receptacle assemblies, as well as other sizes, can be made available upon request.
Consult Tyco Electronics.
.298
[7.57]
.059
[1.50]
.243
[6.17]
.125
[3.18] .125
[3.18] Ty p .
281
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Hermaphroditic Covers for Level V IDC Receptacle Assemblies,
Double-Row, .125 x .125 [3.18 x 3.18] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
.125 [3.18] x .125 [3.18]
Centerline
6
No. of Dimensions Cover Part Nos.
Pos. Without With With Wide With Wide
(Housing
AB C D E
Cable Tie Cable Tie Cable Tie Cable Tie
Size) Paddle Paddle Paddle Paddle and
Polarization
8.491 [12.47] .150 [3.81] .285 [7.24] .166 [4.22] .125 [3.18] — — 103349-4 103350-4
10 .616 [15.65] — — — .125 [3.18] — 103058-3 — —
12 .741 [18.82] — — — .200 [5.08] — 103058-4 — —
16 .991 [25.17] .300 [7.62] .592 [15.04] .416 [10.57] — — — 103349-1 103350-1
20 1.241 [31.52] .300 [7.62] .592 [15.04] .541 [13.74] — — — 103349-5 103350-5
24 1.491 [37.87] — — — .400 [10.16] 1-103056-0 1-103058-0 — —
32 1.991 [50.57] .600 [15.24] 1.312 [33.32] .916 [23.27] — — — 103349-2 103350-2
40 2.491 [63.27] .750 [19.05] 1.820 [46.23] 1.166 [29.61] — — — 103349-3 103350-3
64 See page 282 for Double Cable Tie Paddle versions.
Notes: 1. Two hermaphroditic covers of any style can be installed on a double-row connector housing.
2. Other sizes can be made available upon request.
All covers illustrated here
and on the following page
can be used on the double-
row Level V IDC connectors
shown on page 280.
Material
Black thermoplastic, flame retardant,
94V-0 rated
Cover 103056 Series
without Cable Tie Paddle
Cover 103058 Series
with Cable Tie Paddle
Cover 103349 Series
with Wide Cable Tie Paddle
A
.603
[15.32]
.125
[3.18]
Ty p .
A
.603
[15.32]
A
.605
[15.37]
1.105
[28.07]
Cable Tie
Paddle
B
C
.125
[3.18]
Ty p .
A
.605
[15.37]
.125
[3.18] Ty p .
.125
[3.18]
Ty p .
Cover 103350 Series
with Wide Cable Tie Paddle
and Polarization
.100
[2.54]
(2 Plc.)
Cable Tie
Paddle
D
282
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
.125 [3.18] x .125 [3.18]
Centerline
6
Hermaphroditic Covers for Level V IDC Receptacle Assemblies,
Double-Row, .125 x .125 [3.18 x 3.18] Centerline (Continued)
.603
[15.32]
.100
[2.54]
Ty p .
1.103
[28.02]
Cable Tie Paddle
.125
[3.18] Ty p .
1.312
[33.32] Ty p .
.600
[15.24] Ty p .
3.991
[101.37]
Cover Part No. 104583-1, 64-Position
with Double Cable Tie Paddle
.603
[15.32]
.100
[2.54]
Ty p .
1.103
[28.02]
Cable Tie Paddle
.125
[3.18] Ty p .
1.312
[33.32] Ty p .
.600
[15.24] Ty p .
3.991
[101.37]
Cover Part No. 104584-1, 64-Position
with Double Cable Tie Paddle
and Polarization
.916
[23.27]
283
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
AMPMODU .031 x .062 [0.79 x 1.57] Interconnection System
AMPMODU Interconnection System
Mod I 0.031 x 0.062
Interconnection System
7
The .031 x .062 [0.79 x 1.57]
interconnection system
has served as an industry
standard for modular
packaging for over three
decades. It is a rugged,
large scale system
designed for board-to-board
and board-to-wire or cable
applications that has offered
millions of reliable
interconnections and
countless mating cycles.
This versatile interconnection
system successfully meets
the requirements for most
modular power supply
packaging.
Board mounted receptacles
and receptacle assemblies
are available in various
geometries, offering
packaging interconnections
that include perpendicular,
parallel and stacking
capabilities. Machine
applied terminations,
through matched
application equipment,
are geared to virtually any
production requirement,
assuring the lowest possible
applied cost.
Crimp snap-in receptacles
for 26-18 AWG [0.12 –
0.9mm2] wire provide
excellent discrete wire
terminations. Housings for
these contacts provide for
ease of handling
terminations in high density
applications.
AMPMODU mating posts
are supplied typically as
header assemblies. They are
available in various sizes to
meet the interconnection
and packaging requirements
of your system. However, in
instances where packaging
configurations do not
lend themselves to the
economies of assemblies,
Tyco Electronics can
provide for the discrete
location of individual posts
and receptacles.
If your interconnections
require Top Entry, Bottom
Entry and/or Side Entry for
perpendicular, parallel and
stacked configurations, the
.031 x .062 [0.79 x 1.57]
interconnection system can
fulfill your needs with the
lowest applied cost through
efficient interconnections
and supporting application
equipment.
Product Facts
■Rugged connector system
featuring .031 x .062
[0.79 x 1.57] posts with
mating receptacles
■Current rating 5 amps max
per contact. Varies due to
ambient temperature, wire
size and duty cycles.
■Available for board-to-board
and wire-to-board
applications
■Posts available on strip
for machine application
directly to pc board or in
housings for board
mounting
■Receptacles available for
board mounting or wire
crimping
■Contacts available in both
tin and gold plating
■Flame retardant
thermoplastic housings
94V-0 rated
■Locking Clip contacts
available to mate with
.031 x .062 [0.79 x 1.57]
posts
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 16455
R
R
284
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
AMPMODU .031 x .062 [0.79 x 1.57] Interconnection System (Continued)
AMPMODU Interconnection System
Mod I 0.031 x 0.062
Interconnection System
7
The AMPMODU receptacle
cross-section is primarily
rectangular, with rounded
corners. Two integral
cantilever beams contact
the mating square or
rectangular posts.
Deflection of these spring
members is limited by anti-
overstress and excessive
permanent deformation is
prevented. This feature
allows a wide range of
tolerances for misalignment
of mating contacts.
The configuration of the
receptacle completely
encloses the spring
members preventing
damage during handling
and assembly and makes
the system compatible with
automatic application
techniques.
This design also permits
the use of the receptacles
without housings or
encapsulation.
Note: Application of a
contact lubricant is part of
the manufacturing process
of all AMPMODU tin-plated
crimp products. However,
it is not part of the
manufacturing process of
products that customers will
solder, then clean. For these
products, Tyco Electronics
recommends that customers
purchase a contact
lubricant. (See application
specification 114-25004 for
further information.)
Rugged-self supporting, one-
piece contact body
Reliability-dual
cantilever spring
contact design
and built-in
anti-overstress
Offers high or low
contact forces
Cantilever
Beams
Wide
Misalignment
Tolerance
Wide entry for post to
receptacle
misalignment
Anti-overstress
Insulation Support
Barrel
Wire Crimp Receptacle
Standard Profile
Housing, Unkeyed
for Crimp Snap-In
Receptacles
(Page 291 & 292)
Locking Clip
Contacts
(Page 298)
Locking Clip
Connector
(Page 299)
Header, Right-Angle
Post, Keyed
(Page 297)
Header, Right-Angle
Post, Keyed
(Page 297)
Receptacles,
Crimp Snap-In
(Page 290)
Low Profile
Housing, Keyed
(Page 293)
Straight Posts
Machine Applied
(Page 294)
Straight Posts
Machine Applied
(Page 294)
Board Mount
Receptacle
Assembly,
Horizontal
(Pages 288 & 289)
Board Mount
Receptacle
Assembly,
Vertical
(Page 287)
Header, Straight Post
(Pages 295 & 296)
Board Mount
Receptacles,
Horizontal
and Vertical
Styles
(Pages 285 & 286)
Header, Right-Angle
Post, Keyed
(Page 297)
285
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Mod I Receptacles, Board Mount, .031 x .062 [0.79 x 1.57] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod I Receptacles,
Board Mount
7
Related Product Data
Recommended Board Layout for
Type C — page 288
Mates with —
Machine Applied Posts — page 294
Headers — pages 295-297
Application Tooling —
pages 300-304
Performance Specifications —
page 305
Technical Documents —
page 305
Recommended Board Layout for Receptacle Assemblies
and Individual Receptacles (Type A and B)
J-Receptacle centers may vary depending on requirements. For individual receptacles, minimum nominal centerline
spacing between adjacent receptacles is .150 [3.81]; for receptacle assemblies, centerline spacing between adjacent
receptacles is .156 [3.96]. The .003 [0.08] tolerances are not to accumulate over length of board. For solder mask, see
Tyco Electronics Instruction Sheet 408-7411.
Note: Drawings depict normal use of the contact in a one or two-sided circuit board. When using plated thru-holes,
refer to Tyco Electronics Engineering Report ER-001 and Tyco Electronics Instruction Sheet 408-7411. For solder
mask, see Tyco Electronics Instruction Sheet 408-7411.
Vertical and Horizontal
Board Mount
Part No. 86181-2
Use in Board Mount Receptacles
Keying Plug
Round Hole
(Post Entry Type A or B)
Bottom
Post Entry
Type A
Top
Post Entry
Type B
Horizontal
Post Entry
Type C
.093 Max.
[0.99]
.093 Max.
[2.36]
.125 Max.
[3.18]
.100 Min.
[2.54]
.125 Max.
[3.18]
.125 Max.
[3.18]
.300
[7.62]
.125
[3.18]
J±.003
[±0.08]
2J ±.003
[±0.08]
.055
[1.40]
Min. .125±.002
[3.18±0.05]
.300
[7.62]
.300
[7.62]
.093 Max.
[0.99]
Receptacle Styles
286
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Mod I Receptacles, Board Mount, .031 x .062 [0.79 x 1.57] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod I Receptacles,
Board Mount
7
Board Dimension Standard Pressure High Pressure Insertion
Type Thickness T Finish Part Nos. Part Nos. Applicator No. for
Range (
Ref. Pg. 285
)Strip Form Loose Piece Strip Form Loose Piece “U” Frame Machine
Plating A 86477-2 86480-2 — — 466376-1
A.070-.055 [1.78-1.40] .112 [2.84] Plating B 86477-3 — 87316-3 — 466376-1
Plating C (Solder Resist) 87772-2 — — — 466376-1
Plating A 87003-1 87105-1 — — 466376-1
B.070-.055 [1.78-1.40] .112 [2.84] Plating B 87003-2 — — — 466376-1
Plating C (Solder Resist) 87774-2 — — — 466376-1
CPlating A 85487-4 85493-4 86432-8 86434-6 565967-3
.103-.055 [2.62-1.40] .145 [3.68] Plating B 85487-3 — 86432-1 86434-1
Notes: 1. All strip form parts in packaged quantities of 5,000 each.
2. All loose piece parts in packaged quantities of 500 each.
Material and Finish
Copper alloy, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B — .000079 [0.00201] min.
tin on entire contact
Plating C — (Solder Resist) —
.000030 [0.00076] gold over .000050
[0.00127] nickel on contact area,
.000500 [0.01270] aluminum on inside
area of solder tines; remainder of contact
unfinished
Standard Pressure
Receptacle
High Pressure
Receptacle
.010
[0.25]
Max.
.020
[0.51]
Max.
.210
[5.33]
.210
[5.33]
287
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Mod I Receptacle Assemblies, Vertical Board Mount,
.031 x .062 [0.79 x 1.57] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod I Receptacles,
Vertical Board Mount
7
No. Dimensions Type A Type B
of Standard Pressure High Pressure Standard Pressure
Pos. AB
Plating A Plating B Plating C Plating B Plating A Plating B Plating C
2.156 [3.96] .312 [7.92] 87984-2 87983-2 87989-2 87993-2 87986-2 87985-2 87990-2
3.312 [7.92] .468 [11.89] 87984-3 87983-3 87989-3 87993-3 87986-3 87985-3 87990-3
4.468 [11.89] .624 [15.85] 87984-4 87983-4 87989-4 87993-4 87986-4 87985-4 87990-4
5.624 [15.85] .780 [19.81] 87984-5 87983-5 87989-5 87993-5 87986-5 87985-5 87990-5
6.780 [19.81] .936 [23.77] 87984-6 87983-6 87989-6 87993-6 87986-6 87985-6 87990-6
7.936 [23.77] 1.092 [27.74] 87984-7 87983-7 87989-7 87993-7 87986-7 87985-7 87990-7
81.092 [27.74] 1.248 [31.70] 87984-8 87983-8 87989-8 87993-8 87986-8 87985-8 87990-8
91.248 [31.70] 1.404 [35.66] 87984-9 87983-9 87989-9 87993-9 87986-9 87985-9 87990-9
10 1.404 [35.66] 1.560 [39.62] 1-87984-0 1-87983-0 1-87989-0 1-87993-0 1-87986-0 1-87985-0 1-87990-0
11 1.560 [39.62 1.716 [43.59] 1-87984-1 1-87983-1 1-87989-1 1-87993-1 1-87986-1 1-87985-1 1-87990-1
12 1.716 [43.59] 1.872 [47.55] 1-87984-2 1-87983-2 1-87989-2 1-87993-2 1-87986-2 1-87985-2 1-87990-2
13 1.872 [47.55] 2.028 [51.51] 1-87984-3 1-87983-3 1-87989-3 1-87993-3 1-87986-3 1-87985-3 1-87990-3
14 2.028 [51.51] 2.184 [55.47] 1-87984-4 1-87983-4 1-87989-4 1-87993-4 1-87986-4 1-87985-4 1-87990-4
15 2.184 [55.47] 2.340 [59.44] 1-87984-5 1-87983-5 1-87989-5 1-87993-5 1-87986-5 1-87985-5 1-87990-5
16 2.340 [59.44] 2.496 [63.40] 1-87984-6 1-87983-6 1-87989-6 1-87993-6 1-87986-6 1-87985-6 1-87990-6
17 2.496 [63.40] 2.652 [67.36] 1-87984-7 1-87983-7 1-87989-7 1-87993-7 1-87986-7 1-87985-7 1-87990-7
18 2.652 [67.36] 2.808 [71.32] 1-87984-8 1-87983-8 1-87989-8 1-87993-8 1-87986-8 1-87985-8 1-87990-8
19 2.808 [71.32] 2.964 [75.29] 1-87984-9 1-87983-9 1-87989-9 1-87993-9 1-87986-9 1-87985-9 1-87990-9
20 2.964 [75.29] 3.120 [79.25] 2-87984-0 2-87983-0 2-87989-0 2-87993-0 2-87986-0 2-87985-0 2-87990-0
Single Row .156 [3.96]
Centerline
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Contacts — Copper alloy, plated as
follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B — .000079 [0.00201] min.
tin on entire contact
Plating C — (Solder Resist) —
.000030 [0.00076] gold over .000050
[0.00127] nickel on contact area,
.000500 [0.01270] aluminum on inside
area of solder tines; remainder of contact
unfinished
Related Product Data
Recommended Board Layout —
page 288
Mates with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
Technical Documents —
page 305
Part No. 86181-2
(Use in Board Mount
Receptacles)
Post Entry
Type A
Post Entry
Type B
Keying Plug
X-X
X X
.182
[4.62]
.018
[0.46]
.175±.007
[4.45±0.18]
.300±.003
[7.62±0.08]
.046
[1.17]
Contact
Area
B±.015
[±0.38]
A
.156
[3.96] Ty p .
The letter A
stamped on
contact indicates
mating end of
receptacle.
.112-.000
[2.84±0.00]
+.010
+0.25
288
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Mod I Receptacle Assemblies, Horizontal Board Mount,
.031 x .062 [0.79 x 1.57] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod I Receptacles,
Horizontal Board Mount
7
Single Row .156 [3.96]
Centers
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Contacts — Copper alloy, plated as
follows:
Plating A — Selectively plated
.000030 [0.00076] gold contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B — .000079 [0.00201] min.
tin on entire contact
Related Product Data
Mates with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
Technical Documents —
page 305
Recommended Board
Layouts for Receptacle
Assemblies and Individual
Receptacles (Type C)
The mating post length is depicted by the A dimension on page 294 (machine applied posts) and the C dimension on
pages 295-297 (headers).
H-Receptacle centers may vary depending on requirements. For individual receptacles, minimum nominal centerline
spacing between adjacent receptacles is .125 [3.18] for receptacle assemblies, centerline spacing between adjacent
receptacles is .156 [3.96]. The .003 [0.08] tolerances are not to accumulate over length of board.
This configuration recommended
for use with machine applied posts
or headers with a .500 [12.70]
minimum mating end post length.*
This configuration recommended
for use with machine applied posts
or headers with a .345 [18.76]
minimum mating end post length.*
This configuration recommended
for use with machine applied posts
or headers with a .405 [10.29]
minimum mating end post length.*
Post Entry
Type C
Part No. 86181-2
(Use in Board Mount
Receptacles)
Keying Plug
H±.003
[±0.08]
.055±.005
[1.40±0.13]
.340
+.005
-.000
]
2H ±.003
[±0.08]
[
[8.64+0.13]
H±.003
[±0.08]
.340
+.005
-.000
]
2H ±.003
[±0.08]
[
[8.64+0.13]
H±.003
[±0.08]
.073±.003
[1.85±0.08]
Typ. Dia.
.100
[2.54]
Max.
.073±.003
[1.85±0.08]
Typ. Dia.
.073±.003
[1.85±0.08]
Typ. Dia.
.340
+.005
-.000
]
2H ±.003
[±0.08]
[
[8.64+0.13]
X-X
X X
.182
[4.62]
.145
[3.68]
.300±.003
[7.62±0.08]
.175±.007
[4.45±0.18]
.333±.010
[8.46±0.25]
.018
[0.46]
.046
[1.17]
Contact
Area
B±.015
[±0.38]
A
.156
[3.96] Ty p .
The letter A stamped
on contact indicates
mating end of recep-
tacle.
289
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Mod I Receptacle Assemblies, Horizontal Board Mount,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod I Receptacles,
Horizontal Board Mount
7
No. of Dimensions Standard Pressure High Pressure
Pos. A B Plating A Plating B Plating B
2.156 [3.96] .312 [7.92] 87988-2 87987-2 87995-2
3.312 [7.92] .468 [11.89] 87988-3 87987-3 87995-3
4.468 [11.89] .624 [15.85] 87988-4 87987-4 87995-4
5.624 [15.85] .780 [19.81] 87988-5 87987-5 87995-5
6.780 [19.81] .936 [23.77] 87988-6 87987-6 87995-6
7.936 [23.77] 1.092 [27.74] 87988-7 87987-7 87995-7
81.092 [27.74] 1.248 [31.70] 87988-8 87987-8 87995-8
91.248 [31.70] 1.404 [35.66] 87988-9 87987-9 87995-9
10 1.404 [35.66] 1.560 [39.62] 1-87988-0 1-87987-0 1-87995-0
11 1.560 [39.62] 1.716 [43.59] 1-87988-1 1-87987-1 1-87995-1
12 1.716 [43.59] 1.872 [47.55] 1-87988-2 1-87987-2 1-87995-2
13 1.872 [47.54] 2.028 [51.51] 1-87988-3 1-87987-3 1-87995-3
14 2.028 [51.51] 2.184 [55.47] 1-87988-4 1-87987-4 1-87995-4
15 2.184 [55.47] 2.340 [59.44] 1-87988-5 1-87987-5 1-87995-5
16 2.340 [59.44] 2.496 [63.40] 1-87988-6 1-87987-6 1-87995-6
17 2.496 [63.40] 2.652 [67.36] 1-87988-7 1-87987-7 1-87995-7
18 2.652 [67.36] 2.808 [71.32] 1-87988-8 1-87987-8 1-87995-8
19 2.808 [71.32] 2.964 [75.29] 1-87988-9 1-87987-9 1-87995-9
20 2.964 [75.29] 3.120 [79.25] 2-87988-0 2-87987-0 2-87995-0
290
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Mod I Receptacles, Crimp Snap-In (Wire Applied),
.031 x .062 [0.79 x 1.57] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod I Receptacles,
Crimp Snap-In
7
Standard Pressure
Wire Size Range Ins. Dia. Finish Strip Form Loose Piece
AWG [mm2] Range Packaged Part Packaged Part
Quantities Nos. Quantities Nos.
22-18 [0.3-0.9] .051-.090 [1.30–2.29] Plating A 5,000 102099-2 500 102103-2
Plating B 5,000 102099-5 500 102103-3
Wire Size Range
Applicator (High Pressure) Premium
AWG [mm2]Part Used With CERTI-CRIMP
Number Type Machine Hand Tool
Part Number
466764-3 HDM Model "G" (AMP-O-LECTRIC)
22-18 [0.3-0.9] 466764-2 HDM Model "K" (AMP-O-LECTRIC) 90274-2
466764-1 HDM CLS IV+ (AMPOMATOR)
466937-1 SCA Stripper-Crimper (AMP-O-MATIC)
26-22 [0.12-0.4] 466763-2 HDM Model "K" (AMP-O-LECTRIC) 90328-1
466763-1 HDM CLS IV+ (AMPOMATOR)
AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines and
Stripper/Crimper Machines. Consult Tyco Electronics.
High Pressure
Wire Size Range Ins. Dia. Finish Strip Form Loose Piece
AWG [mm2] Range Packaged Part Packaged Part
Quantities Nos. Quantities Nos.
22-18 [0.3-0.9] .051-.090 [1.30–2.29] Plating A 5,000 102100-2 500 102104-2
Plating B 5,000 102100-5 500 102104-3
26-22 [0.12-0.4] 0.42-.073 [1.07-1.85] Plating A 5,000 102102-2 500 102106-2
Plating B 5,000 102102-5 500 102106-3
Applicator (Standard Pressure) Premium
Wire Size Range Part Used With CERTI-CRIMP
AWG [mm2]Number Type Machine Hand Tool
Part Number
466764-3 HDM Model "G" (AMP-O-LECTRIC)
22-18 466764-2 HDM Model "K" (AMP-O-LECTRIC)
[0.3-0.9] 466764-1 HDM CLS IV+ (AMPOMATOR) 90274-2
466937-1 SCA Stripper-Crimper (AMP-O-MATIC)
AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines and
Stripper/Crimper Machines. Consult Tyco Electronics.
Material and Finish
Copper alloy, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B — .000016 [0.00041] min.
tin on entire contact
Related Product Data
Housings used in — pages 291-293
Mate with Machine Applied
Posts — page 294
Headers — pages 295-297
Application Tooling — page 300-304
Performance Specification —
page 305
Technical Documents —
page 305
.014
[0.36]
Max.
.020
[0.51]
Max.
.210
[5.33]
.210
[5.33]
High Pressure Receptacle
Standard Pressure
Receptacle
Extraction Tool Part No. 843473-1
Part Instruction Sheet 408-9451
.125
[3.18] Max.
.093
[2.36]
Max.
.280
[7.11]
.580
[14.73]
291
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Mod I Receptacle Housings, Standard Profile, Unkeyed,
.031 x .062 [0.79 x 1.57] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod I Receptacle
Housings
7
No. of Dimensions Housing Part Nos.
Pos. A B L Stamped1Unstamped2
21.156 [3.96] .312 [7.92] — 2-87025-5
32.312 [7.92] .468 [11.89] — 2-87025-1
43.468 [11.89] .624 [15.85] — 1-87025-3
54.624 [15.85] .780 [19.81] — 2-87025-3
65.780 [19.81] .936 [23.77] 87025-1 87025-2
76.936 [23.77] 1.092 [27.74] — 3-87025-4
871.092 [27.74] 1.248 [31.70] — 1-87025-6
981.248 [31.70] 1.404 [35.66] 87025-9 1-87025-0
10 9 1.404 [35.66] 1.560 [39.62] 1-87025-7 1-87025-8
11 10 1.560 [39.62] 1.716 [43.59] — 3-87025-6
12 11 1.716 [43.59] 1.872 [47.55] 1-87025-1 1-87025-2
13 12 1.872 [47.55] 2.028 [51.51] — 3-87025-0
14 13 2.028 [51.51] 2.184 [55.47] — 3-87025-8
15 14 2.184 [55.47] 2.340 [59.44] — 3-87025-2
16 15 2.340 [59.44] 2.496 [63.40] — 2-87025-0
17 16 2.496 [63.40] 2.652 [67.36] — 4-87025-0
18 17 2.652 [67.36] 2.808 [71.32] — 87025-4
19 18 2.808 [71.32] 2.964 [75.29] — 87025-6
20 19 2.964 [75.29] 3.120 [79.25] — 87025-8
25 24 3.744 [95.10] 3.900 [99.06] — 5-87025-0
Notes: 1Markings on housing.
2No markings on housing.
Single Row, .156 [3.96]
Centers, Without Strain
Relief
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Contacts used with — page 290
Mate with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
Technical Documents —
page 305
Locking Ledge
Identification
Identifiers on ends of
housing are optional at
AMP’s discretion
.030±.010
[0.76±0.25]
.790
[20.07]
A spaces @ .156±.003 = B ±.003
[3.96±0.08] [±0.08]
.077
[1.96]
.156
[3.96] Ty p .
.120
[3.05] Ty p .
.250
[6.35] Max.
L±.015
[±0.38]
Y
Y
Y-Y
292
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Mod I Receptacle Housings, Standard Profile, Unkeyed,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod I Receptacle
Housings
7
Single Row, .156 [3.96]
Centers, With Strain Relief
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Contacts used with — page 290
Mate with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
Technical Documents —
page 305
10 Position Receptacle Housing, Part No. 1-102090-0
.992
[25.20]
.397
[10.08]
.446
[11.33] .298 [7.57]
.206±.020
[5.23±0.51]
.694
[17.63]
.843
[21.41]
.040
[1.02]
.290
[7.37]
.094
[2.39] Dia.
4 Plc.
1.640
[41.66]
1.560
[39.62]
293
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Mod I Receptacle Housings, Low Profile, Keyed,
.031 x .062 [0.79 x 1.57] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod I Receptacle
Housings
7
Keying Plug References
Wire Exit Face Wire Exit Face
Post
Mating Face
Post
Mating Face
Keying Plug
Material — Natural Color Nylon
Single Row, .156 [3.96]
Centers
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Contacts used with — page 290
Mate with —
Headers — pages 295-297
Performance Specifications —
page 305
Technical Documents —
page 305
Fits
through
.125 [3.18]
Dia. Hole
.050
[1.27]
.160
[4.06]
Keying Plug
87116-2
(Flush)
Keying Plug
87116-2
(Flush)
For Standard Housings For Low Profile Housings
Locking Ledge
Identification
Identifiers on ends of
housing are optional at
AMP’s discretion
.030±.010
[0.76±0.25]
.640
[16.26]
A spaces @ .156±.003 = B ±.003
[3.96±0.08] [±0.08]
.077
[1.96]
.040
[1.02]
.125
[3.18]
.075
[1.91] Ty p .
.156
[3.96] Ty p .
.120
[3.05] Ty p .
.250
[6.35] Max.
L±.015
[±0.38]
No. of Dimensions No. of Housing Part Nos. Key
Pos. Keys (Unstamped)1Locations
AB L
21.156 [3.96] .312 [7.92] 1 87159-3 A
32.312 [7.92] .468 [11.89] 1 87159-4 A
43.468 [11.89] .624 [15.85] 2 87159-5 A,C
54.624 [15.85] .780 [19.81] 2 87159-1 A,D
65.780 [19.81] .936 [23.77] 3 87159-6 A,C,E
76.936 [23.77] 1.092 [27.74] 3 87159-7 A,C,E
871.092 [27.74] 1.248 [31.70] 4 87159-8 A,C,E,G
981.248 [31.70] 1.404 [35.66] 3 87159-9 A,D,G
10 9 1.404 [35.66] 1.560 [39.62] 5 1-87159-0 A,C,E,G,J
11 10 1.560 [39.62] 1.716 [43.59] 4 1-87159-1 A,D,G,K
12 11 1.716 [43.59] 1.872 [47.55] 6 1-87159-2 A,C,E,G,J,L
13 12 1.872 [47.55] 2.028 [51.51] 4 87159-2 A,D,J,M
14 13 2.028 [51.51] 2.184 [55.47] 7 1-87159-3 A,C,E,G,J,L,N
15 14 2.184 [55.47] 2.340 [59.44] 5 1-87159-4 A,D,G,K,N
16 15 2.340 [59.44] 2.496 [63.40] 8 1-87159-5 A,C,E,G,J,L,N,Q
17 16 2.496 [63.40] 2.652 [67.36] 6 1-87159-6 A,D,G,K,N,R
18 17 2.652 [67.36] 2.808 [71.32] 6 1-87159-7 A,D,F,J,P,S
19 18 2.808 [71.32] 2.964 [75.29] 8 1-87159-8 B,D,F,J,L,N,Q,S
20 19 2.964 [75.29] 3.120 [79.25] 10 1-87159-9 A,C,E,G,J,L,N,Q,S,U
25 24 3.744 [95.10] 3.900 [99.06] 11 2-87159-4 A,C,E,H,K,M,Q,S,U,W,Y
1No marking on housing.
Part No. 87116-2
294
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Mod I Posts, Machine Applied, .031 x .062 [0.79 x 1.57] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod I Posts,
Machine Applied
7
Dimensions Finish Part Nos.
A B C Strip Form1Loose Piece2
.360 [9.14] .187 [4.75] .595 [15.11] Plating A 86147-7 86182-7
Plating B 5086147-2 5086182-2
.380 [9.65] .320 [8.13] .748 [19.00] Plating A 1-86147-5 1-86182-5
Plating B 5086147-9 5086182-9
.400 [10.16] .125 [3.18] .573 [14.55] Plating A 4-86147-2 2-86182-9
Plating B 3-5086147-7 2-5086182-5
.480 [12.19] .187 [4.75] .715 [18.16] Plating A 1-86147-8 1-86182-8
Plating B 2-5086147-2 2-5086182-2
.565 [14.35] .187 [4.75] .800 [20.32] Plating A 86147-8 86182-8
Plating B 5086147-1 5086182-1
.800 [20.32] .150 [3.81] .998 [25.35] Plating A 1-86147-2 1-86182-2
Plating B 1-5086147-0 1-5086182-0
1 Packaging quantity of 20,000 per reel.
2 Packaging quantity of 1,000 per bag.
Note: Strip form posts applied with Insertion Machine No. 3-457382-1, includes power unit and applicator.
Typical Assembly
Straight Posts
Material and Finish
Brass, plated .000030 [0.00076] gold
over .000050 [0.00127] nickel on entire
post
Related Product Data
Mate with —
Board Mount Receptacles —
pages 285, 286
Board Mount Receptacle
Assemblies — pages 287-289
Crimp Snap-In Receptacles and
Housings — pages 290-292
Locking Clip Contacts &
Housings — pages 298, 299 (see page
298 for recommended post length).
Application Tooling —
pages 300-304
Performance Specifications —
page 305
Technical Documents —
page 305
D—Post centers may vary depending on requirements. Minimum nominal
centerline spacing between adjacent contacts is .125 [3.18]; .003 [0.08]
tolerances not to accumulate over length of board.
E—Post center location from edge of board may vary to satisfy application.
Recommended Mounting Holes
.048
[1.22]
.080
[2.03]
.062
[1.57]
.031
[0.78]
.078±.002
[1.98±0.05] Dia.
(Drilled Hole)
.150
[3.81]
.150
[3.81] Cut Off
D±.003
[±0.08]
E
A B
C
2D ±.003
[±0.08]
295
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Mod I Headers, Straight Post, Keyed, .031 x .062 [0.79 x 1.57] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod I Headers
7
Single Row, .156 [3.96]
Centers
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Brass, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
min. nickel on entire post
Plating B — .000100-.000200
[0.00254-0.00508] tin over .000030
[0.00762] nickel on entire post
Related Product Data
Mate with —
Board Mount Receptacles —
pages 285, 286
Board Mount Receptacle
Assemblies — pages 287-289
Crimp Snap-In Receptacles and
Housings — pages 290-292
Locking Clip Contacts &
Housings — pages 298 & 299 (see
page 298 for recommended post length).
Performance Specifications —
page 305
Technical Documents —
page 305
No. of Dimensions No. of Post Height Post Height
Keyway
Pos. Keying D=.405 [10.29] D=.587 [14.91] Locations
ABC
Slots Plating A Plating B Plating A Plating B
21.156 [3.96] .267 [6.78] 1 85829-2 5-87160-4 87247-2 5-87262-2 A
32.312 [7.92] .423 [10.74] 1 85829-3 5-87160-5 87247-3 5-87262-3 A
43.468 [11.89] .579 [14.71] 2 85829-4 5-87160-6 87247-4 5-87262-4 A,C
54.624 [15.85] .735 [18.67] 2 85829-5 5-87160-1 87247-5 5-87262-5 A,D
65.780 [19.81] .891 [22.63] 3 85829-6 5-87160-7 87247-6 5-87262-6 A,C,E
76.936 [23.77] 1.047 [26.59] 3 85829-7 5-87160-8 87247-7 5-87262-7 A,C,E,
871.092 [27.74] 1.203 [30.56] 4 85829-8 5-87160-9 87247-8 5-87262-8 A,C,E,G
981.248 [31.70] 1.359 [34.52] 3 85829-9 6-87160-0 87247-9 5-87262-9 A,D,G
10 9 1.404 [35.66] 1.515 [38.48] 5 1-85829-0 6-87160-1 1-87247-0 6-87262-0 A,C,E,G,J
11 10 1.560 [39.62] 1.671 [42.44] 4 1-85829-1 6-87160-2 1-87247-1 6-87262-1 A,D,G,K
12 11 1.716 [43.59] 1.827 [46.41] 6 1-85829-2 6-87160-3 1-87247-2 6-87262-2 A,C,E,G,J,L
13 12 1.872 [47.55] 1.983 [50.37] 4 1-85829-3 5-87160-2 1-87247-3 6-87262-3 A,D,J,M
14 13 2.028 [51.51] 2.139 [54.33] 7 1-85829-4 6-87160-4 1-87247-4 6-87262-4 A,C,E,G,J,L,N
15 14 2.184 [55.47] 2.295 [58.29] 5 1-85829-5 6-87160-5 1-87247-5 6-87262-5 A,D,G,K,N
16 15 2.340 [59.44] 2.451 [62.26] 8 1-85829-6 6-87160-6 1-87247-6 6-87262-6 A,C,E,G,J,L,N,Q
17 16 2.496 [63.40] 2.607 [66.22] 6 1-85829-7 6-87160-7 1-87247-7 6-87262-7 A,D,G,K,N,R
18 17 2.652 [67.36] 2.763 [70.18] 7 1-85829-8 6-87160-8 1-87247-8 6-87262-8 A,D,F,J,M,P,S
19 18 2.808 [71.32] 2.919 [74.14] 8 1-85829-9 6-87160-9 1-87247-9 6-87262-9 B,D,F,J,L,N,Q,S
20 19 2.964 [75.29] 3.075 [78.11] 10 2-85829-0 7-87160-0 2-87247-0 7-87262-0 A,C,E,G,J,L,N,Q,S,U
21 20 3.120 [79.25] 3.231 [82.07] 7 2-85829-1 7-87160-1 2-87247-1 7-87262-1 A,D,G,K,N,R,U
22 21 3.276 [83.21] 3.387 [86.03] 11 2-85829-2 7-87160-2 2-87247-2 7-87262-2 A,C,E,G,J,L,N,Q,S,U,W
23 22 3.432 [87.17] 3.543 [89.99] 8 2-85829-3 7-87160-3 2-87247-3 7-87262-3 A,D,G,K,N,R,U,X
24 23 3.588 [91.14] 3.699 [93.95] 12 2-85829-4 7-87160-4 2-87247-4 7-87262-4 A,C,E,G,J,L,N,Q,S,U,W,Y
25 24 3.744 [95.10] 3.855 [97.92] 11 2-85829-5 7-87160-5 2-87247-5 7-87262-5 A,C,E,H,K,M,Q,S,U,W,Y
Recommended Board Layout
.312±.003
[7.92±0.08]
.156±.003
[3.96±0.08]
.125 [3.18]
.055±.003
[1.40±0.08]
Dia.
.250±.010
[6.35±0.25]
See chart
for locations
.250±.010
[6.35±0.25]
.405±.010
[10.29±0.25]
C
1.00
[2.54] Ty p. Ke y way
A spaces @ .156±.003 = B ±.003
[3.96±0.08] [±0.08]
.031
[0.79]
.062
[1.57]
.125±.010
[3.18±0.25]
.031±.001
[0.79±0.03] Ty p . .063±.002
[1.60±0.05]
.125
[3.18]
.035
[0.89]
.085
[2.16 ] Max.
.040-.015
[1.02±0.38]
+.000
+0.00 Ty p .
Keyway Locations
(Ref only)
296
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Mod I Headers, Straight Post, Keyed,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod I Headers
7
No. of Dimensions No. of Post Height Post Height Post Height
Keying D=.750 [19.05] D=1.187 [30.15] D=1.310 [33.27] Keyway
Pos. AB C
Slots Plating A Plating B Plating A Plating B Plating A Plating B
Locations
21.156 [3.96] .267 [6.78] 1 85923-2 5-85875-7 87283-2 — 85839-2 5-85840-2 A
32.312 [7.92] .423 [10.74] 1 85923-3 5-85875-8 87283-3 5-86207-2 85839-3 5-85840-3 A
43.468 [11.89] .579 [14.71] 2 85923-4 5-85875-1 87283-4 5-86207-9 85839-4 5-85840-4 A,C
54.624 [15.85] .735 [18.67] 2 85923-5 5-85875-2 87283-5 5-86207-3 85839-5 5-85840-5 A,D
65.780 [19.81] .891 [22.63] 3 85923-6 5-85875-9 87283-6 — 85839-6 5-85840-6 A,C,E
76.936 [23.77] 1.047 [26.59] 3 85923-7 6-85875-0 87283-7 — 85839-7 5-85840-7 A,C,E,
871.092 [27.74] 1.203 [30.56] 4 85923-8 6-85875-1 87283-8 — 85839-8 5-85840-8 A,C,E,G
981.248 [31.70] 1.359 [34.52] 3 85923-9 5-85875-3 87283-9 — 85839-9 5-85840-9 A,D,G
10 9 1.404 [35.66] 1.515 [38.48] 5 1-85923-0 6-85875-2 1-87283-0 — 1-85839-0 6-85840-0 A,C,E,G,J
11 10 1.560 [39.62] 1.671 [42.44] 4 1-85923-1 6-85875-3 1-87283-1 — 1-85839-1 6-85840-1 A,D,G,K
12 11 1.716 [43.59] 1.827 [46.41] 6 1-85923-2 5-85875-4 1-87283-2 — 1-85839-2 6-85840-2 A,C,E,G,J,L
13 12 1.872 [47.55] 1.983 [50.37] 4 1-85923-3 6-85875-4 1-87283-3 — 1-85839-3 6-85840-3 A,D,J,M
14 13 2.028 [51.51] 2.139 [54.33] 7 1-85923-4 6-85875-5 1-87283-4 — 1-85839-4 6-85840-4 A,C,E,G,J,L,N
15 14 2.184 [55.47] 2.295 [58.29] 5 1-85923-5 6-85875-6 1-87283-5 — 1-85839-5 6-85840-5 A,D,G,K,N
16 15 2.340 [59.44] 2.451 [62.26] 8 1-85923-6 6-85875-7 1-87283-6 — 1-85839-6 6-85840-6 A,C,E,G,J,L,N,Q
17 16 2.496 [63.40] 2.607 [66.22] 6 1-85923-7 6-85875-8 1-87283-7 — 1-85839-7 6-85840-7 A,D,G,K,N,R
18 17 2.652 [67.36] 2.763 [70.18] 7 1-85923-8 6-85875-9 1-87283-8 — 1-85839-8 6-85840-8 A,D,F,J,M,P,S
19 18 2.808 [71.32] 2.919 [74.14] 8 1-85923-9 7-85875-0 1-87283-9 — 1-85839-9 6-85840-9 B,D,F,J,L,N,Q,S
20 19 2.964 [75.29] 3.075 [78.11] 10 2-85923-0 7-85875-1 2-87283-0 — 2-85839-0 7-85840-0 A,C,E,G,J,L,N,Q,S,U
21 20 3.120 [79.25] 3.231 [82.07] 7 2-85923-1 7-85875-2 2-87283-1 — 2-85839-1 7-85840-1 A,D,G,K,N,R,U
22 21 3.276 [83.21] 3.387 [86.03] 11 2-85923-2 7-85875-3 2-87283-2 — 2-85839-2 7-85840-2 A,C,E,G,J,L,N,Q,S,U,W
23 22 3.432 [87.17] 3.543 [89.99] 8 2-85923-3 5-85875-5 2-87283-3 — 2-85839-3 7-85840-3 A,D,G,K,N,R,U,X
24 23 3.588 [91.14] 3.699 [93.95] 12 2-85923-4 7-85875-4 2-87283-4 — 2-85839-4 7-85840-4 A,C,E,G,J,L,N,Q,S,U,W,Y
25 24 3.744 [95.10] 3.855 [97.92] 11 2-85923-5 7-85875-5 2-87283-5 — 2-85839-5 7-85840-5 A,C,E,H,K,M,Q,S,U,W,Y
297
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Mod I Headers, Right-Angle Post, Keyed, .031 x .062 [0.79 x 1.57] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Mod I Headers
7
No. of Dimensions No. of Post Height Post Height
Keyway
Pos. AB C
Keying D=.345 [8.76] D=.500 [12.70] Locations
Slots Plating A Plating C Plating B Plating C
21.156 [3.96] .267 [6.78] 1 87654-2 5-87655-2 87258-2 5-87194-1 A
32.312 [7.92] .423 [10.74] 1 87654-3 5-87655-3 87258-3 5-87194-2 A
43.468 [11.89] .579 [14.71] 2 87654-4 5-87655-4 87258-4 5-87194-3 A,C
54.624 [15.85] .735 [18.67] 2 87654-5 5-87655-5 87258-5 5-87194-4 A,D
65.780 [19.81] .891 [22.63] 3 87654-6 5-87655-6 87258-6 5-87194-5 A,C,E
76.936 [23.77] 1.047 [26.59] 3 87654-7 5-87655-7 87258-7 5-87194-6 A,C,E
871.092 [27.74] 1.203 [30.56] 4 87654-8 5-87655-8 87258-8 5-87194-7 A,C,E,G
981.248 [31.70] 1.359 [34.52] 3 87654-9 5-87655-9 87258-9 5-87194-8 A,D,G
10 9 1.404 [35.66] 1.515 [38.48] 5 1-87654-0 6-87655-0 1-87258-0 5-87194-9 A,C,E,G,J
11 10 1.560 [39.62] 1.671 [42.44] 4 1-87654-1 6-87655-1 1-87258-1 6-87194-0 A,D,G,K
12 11 1.716 [43.59] 1.827 [46.41] 6 1-87654-2 6-87655-2 1-87258-2 6-87194-1 A,C,E,G,J,L
13 12 1.872 [47.55] 1.983 [50.37] 4 1-87654-3 6-87655-3 1-87258-3 6-87194-2 A,D,J,M
14 13 2.028 [51.51] 2.139 [54.33] 7 1-87654-4 6-87655-4 1-87258-4 6-87194-3 A,C,E,G,J,L,N,
15 14 2.184 [55.47] 2.295 [58.29] 5 1-87654-5 6-87655-5 1-87258-5 6-87194-4 A,D,G,K,N
16 15 2.340 [59.44] 2.451 [62.26] 8 1-87654-6 6-87655-6 1-87258-6 6-87194-5 A,C,E,G,J,L,N,Q
17 16 2.496 [63.40] 2.607 [66.22] 6 1-87654-7 6-87655-7 1-87258-7 6-87194-6 A,D,G,K,N,R
18 17 2.652 [67.36] 2.763 [70.18] 7 1-87654-8 6-87655-8 1-87258-8 6-87194-7 A,D,F,J,M,P,S
19 18 2.808 [71.32] 2.919 [74.14] 8 1-87654-9 6-87655-9 1-87258-9 6-87194-8 B,D,F,J,L,N,Q,S
20 19 2.964 [75.29] 3.075 [78.11] 10 2-87654-0 7-87655-0 2-87258-0 6-87194-9 A,C,E,G,J,L,N,Q,S,U
21 20 3.120 [79.25] 3.231 [82.07] 7 2-87654-1 7-87655-1 2-87258-1 7-87194-0 A,D,G,K,N,R,U
22 21 3.276 [83.21] 3.387 [86.03] 11 2-87654-2 7-87655-2 2-87258-2 7-87194-1 A,C,E,G,J,L,N,Q,S,U,W
23 22 3.432 [87.17] 3.543 [89.99] 8 2-87654-3 7-87655-3 2-87258-3 7-87194-2 A,D,G,K,N,R,U,X
24 23 3.588 [91.14] 3.699 [93.95] 12 2-87654-4 7-87655-4 2-87258-4 7-87194-3 A,C,E,G,J,L,N,Q,S,U,W,Y
25 24 3.744 [95.10] 3.855 [97.92] 11 2-87654-5 7-87655-5 2-87258-5 7-87194-4 A,C,E,H,K,M,Q,S,U,W,Y
Single Row, .156 [3.96]
Centers
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Brass, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Plating B — .000015 [0.00038] gold
over .000050 [0.00127] nickel on entire
post
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
Related Product Data
Mate with —
Board Mount Receptacles —
pages 285, 286
Board Mount Receptacle
Assemblies — pages 287-289
Crimp Snap-In Receptacles and
Housings — pages 290-292
Locking Clip Contacts and
Housings — pages 298 & 299 (see
page 298 for recommended post length).
Performance Specifications —
page 305
Technical Documents —
page 305
E Dimension
.345 [8.76] Post Height —
.250 [6.35] for mounting header flush
with board edge; .595 [15.11] for
supporting mating connector on board.
.500 [12.70] Post Height —
.250 [6.35] for mounting header flush
with board edge; .750 [19.05] for
supporting mating connector on board.
Recommended Board Layout
.312±.003
[7.92±0.08] .156±.003
[3.96±0.08]
E
.078±.002
[1.98±0.05]
Dia.
Keyway Locations
(Ref Only)
C
.031±.001
[0.79±0.03] Ty p .
.040-.015
2 Plc.
[1.02-0.38]
.031
[0.79]
See Table
for Locations
.131
[3.33]
.125
[3.18]
.125±.010
[3.18±0.25]
.250±.010
[6.35±0.25]
.062±.001
[1.57±0.03]
.345±.010
[8.76±0.25]
.275±.015
[6.99±0.38]
A Spaces @ 1.56 = B
[3.96]
.100
[2.54] Ty p. Ke y w ay
+.000
+0.00
298
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Locking Clip Contacts for .031 x .062 [0.79 x 1.57] Posts,
.031 x .062 [0.79 x 1.57] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Locking Clip Contacts
7
Wire Harnessing
If necessary, wires can be
grouped with cable ties and
secured to a panel with
fixed clamps. However,
locking clip contacts must
be free to float within the
connector housings to
allow proper extraction.
Therefore, harnessing
hardware or the use of
multiple terminations per
contact must not restrict
the free-floating action of
contacts in the housing. For
more information, request
Insulating and Bundling
Products Catalog 124132.
Wire Crimp Contacts with
Insulation Support
Material and Finish
Contact Body — Phosphor bronze,
plated as follows:
Plating A — Selectively plated
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Plating B — .000100 [0.00254] min.
tin over .000050 [0.00127] nickel on
entire contact
Contact Spring — Stainless steel
Related Product Data
Mate with —
Machine Applied Posts — page 294
Headers (.500 Post Height Only) —
pages 295-297 (see recommended post
length below)*
Housings used in — page 299
Application Tooling —
pages 300-304
Performance Specification — page
305
Technical Documents —
page 305
Extraction Tool
Part No. 91104-1
Instruction Sheet
408-7678
Wire Size Ins. Dia. Contact Part Nos.
Range Range Finish Strip Form Loose Piece
AWG [mm2]
22-18 [0.3-0.9] .050-.0100 [1.27–2.54] Plating A 87269-2 87278-2
Plating B 5-87269-1 5-87278-1
Wire Size Applicator Premium
Range Part Used With CERTI-CRIMP
AWG [mm2]Number Type Machine Hand Tool
Part Number
22-18 [0.3-0.9] 466007-2 HDM Model "K" (AMP-O-LECTRIC)190308-1
466950-2 SCA Stripper/Crimper (AMP-O-MATIC)
Cable
Tie
Fixed
Clamp
Mating Post
Spring
Body
Unrestricted
Wire for
Free-Floating
Contacts
1AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines. Consult
Tyco Electronics.
Note: These contacts must be crimped in accordance with Tyco Electronics Specification No. 114-25008 in order to
function properly in a connector housing.
Extraction Tool Part No. 91104-1 is used for removing individual contacts from connector housings and for detaching
contacts from mating posts.
*Dimension defines .031 x .062 [0.79 x 1.57] portion of post.
If post is longer than maximum specified, post tip may butt against wire ends.
.281/.344* [7.14/8.74]
(without housing)
.370/.433* [9.40/11.00]
(with housing)
299
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Locking Clip Connector Housings, .031 x .062 [0.79 x 1.57] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS
compliant.
Locking Clip
Connector Housing
7
No. of Dimensions Housing Part Nos. Keyed Positions
Pos. ABC UnKeyedKeyed
on Mating Face
1——.200 [5.08] 87270-1 — —
2——.376 [9.55] 87270-2 — —
3.156 [3.96] .156 [3.96] .532 [13.51] 1-87270-3 — —
3 of 4 .156 [3.96] .312 [7.92] .688 [17.48] — 87270-3 ■■■■■■■
4 87270-4 — —
4 of 5 .312 [7.92] .312 [7.92] .844 [21.44] — 1-87270-0 ■■■■■■■■■
5 1-87270-4 — —
5 of 6 .312 [7.92] .468 [11.89] 1.000 [25.40] — 1-87270-2 ■■■■■■■■■■■
6 87270-5 — —
6 of 7 .468 [11.89] .468 [11.89] 1.156 [29.36] — 1-87270-1 ■■■■■■■■■■■■■
7 1-87270-5 — —
8.468 [11.89] .624 [15.85] 1.312 [33.32] 87270-6 — —
9.624 [15.85] .624 [15.85] 1.468 [37.29] 1-87270-6 — —
10 .624 [15.85] .780 [19.81] 1.624 [41.25] 87270-7 — —
11 .780 [19.81] .780 [19.81] 1.780 [45.21] 1-87270-7 — —
12 .780 [19.81] .936 [23.77] 1.936 [49.17] 87270-8 — —
■Indicates "closed cavity". No post entry hole in this position.
Notes: 1. All housings listed above will accept Locking Clip Contacts No. 87269 and 87278, refer to page 298
2. Refer to Tyco Electronics Instruction Sheet 408-7676 for proper contact orientation within the housings.
Single Row, .156 [3.96]
Centers
Material and Finish
Black thermoplastic, 94V-0 rated
Related Product Data
Contacts used with — page 298
Mate with —
Machine Applied Posts — page 294
Headers — pages 295-297 (see page
298 for recommended post length)
Performance Specifications —
page 305
Technical Documents —
page 305
C
A B
.860
[21.84]
.220
[5.59]
.060
[1.52]
.031 x .062
[0.79 x 1.57]
Post
(Ref only)
.433/.370
[11.00/9.40]
.194
[4.93]
.110
[2.79]
Ty p .
.156
[3.96]
Ty p .
.110
[2.79] Min.
Ty p .
300
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Application Tooling
AMPMODU Interconnection System
Note: All part numbers are RoHS
compliant.
Application Tooling
7
For Crimp Snap-In
Receptacles and Locking
Clip Contacts
Note: For additional tooling options, contact Tyco Electronics or reference the Tyco Electronics web site.
Side-Feed Heavy-Duty
Miniature Applicators
(Coded HDM)
Interchangeable applicators
for crimping products reeled
side-by-side on single or
dual carrier strips (primarily
closed-barrel terminals and
open-barrel contacts).
Similar design as the end-
feed version. All side-feed
applicators include a wire
stop to help correctly
position the wire end in the
crimping target area.
For more information, request
Instruction Sheet 408-8040.
AMP-O-LECTRIC Model “G”
Terminating Machines,
354500-1, -9, -11
Semiautomatic bench
machines for crimping
reeled terminals and
contacts, featuring a quiet
and reliable direct motor
drive, microprocessor
controls for ease of setup
and operation, and guarding
and lighting designed for
operator convenience and
safety. All models are
equipped with either manual
or automatic precision
adjustment of crimp height.
Machine-mounted sensors
are available for crimp
quality monitoring using
conventional miniature-style
applicators.
Specifications
Width — 18.7-25.3 [475-643]
depending on applicator type
Depth — 21.5-28.1 [546-713]
depending on applicator type
Height — 20 [508]
Weight — 240 lb [110 kg]
Electrical — 120 or 220 VAC, 50
or 60 Hz; 310 VA
Air — 90-110 psi [6.21-7.59 bar],
6 scfm [0.00282 m3/s] when
required with air-feed applicators
Wire Range — 26-10 AWG
[0.12-6 mm2] solid or stranded,
depending on product applied
For more information, request
Catalog 65828, Video 198116,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
AMPOMATOR CLS IV+
Lead-Making Machines,
356500-1, -2, 1213400-1, -2
Fully-automatic machines
that measure, cut, strip and
terminate single leads.
Microprocessor-controlled,
and programmed and
operated using an easy-to-
follow, menu-driven
touchscreen. Features
include direct-drive
terminating units with
precision crimp height
adjustment, fully
programmable setups, wire
runout and splice detection,
and motorized pre-feed with
wire straightener. Crimp
quality monitoring is also
available.
Specifications
Width — 159 [4 040]
Depth — 68 [1 730]
Height — 86 [2 185] with
24 [610] dia. reel
Weight — 2 000 lb [907 kg]
Electrical — 220 VAC, 50 or
60 Hz, single phase, 25 A, with
neutral and ground
Air — 90 psi [6.21 bar], 15 scfm
[0.0071 m3/s] sustained
Wire Range — 26-10 AWG
[0.12-6 mm2] stranded, 26-16 AWG
[0.12-1.4 mm2] solid
Lead Lengths — 3-90
[76.2-2 285], 90-1 000
[2 285-25 400] with long lead
conveyors
For more information, request
Catalog 124324, Video 198142
(NTSC), 199609 (PAL).
301
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Application Tooling (Continued)
AMPMODU Interconnection System
Application Tooling
7
Stripper-Crimper
Applicators (coded SCA)
Interchangeable applicators
for crimping products in
AMP-O-MATIC Stripper-
Crimper Machines. Consist
of separate ram and lower
tooling assemblies. Similar
dial-in settings for different
wire sizes and insulation
diameters as HDM
applicators. Available with
sensors for use with the
Crimp Quality Monitor.
For more information, request
Catalog 65004 (AMP-O-MATIC
Stripper-Crimper Machines),
Catalog 82275 [Crimp Quality
Monitor (CQM)].
Kappa 235, Automatic Cut
and Strip, 3-547178-1
The Kappa 235 has the
capability of processing
wires with a cross section of
up to 4 AWG and an outside
diameter of 0.59 inch.
Options include an inner
conductor processing kit for
multiconductor cables and
a flat ribbon cable kit.
Specifications
Width—25 [630]
Depth—16 [490]
Height—13.4 [370]
Weight—95 lb [44 kg]
Wire Cross-Sections—
24-4 AWG [0.22-25 mm2]
Flat Ribbon Cables—width up
to 40mm
Length Range—0.04”-328ft
[1mm - 99.99m] (+/- 0.2%)
Electrical—110/230 V -
50/60Hz, switches automatically
AMP-O-MATIC Stripper-
Crimper Machines,
854040-3, -4
Semiautomatic bench
crimping machines that also
strip the wire, and are
therefore used for
terminating jacketed cable.
Feature manual precision
adjustment of crimp height,
keyed strip blades for faster,
more accurate setups, and
an efficient scrap removal
system. All adjustments can
be made from the front of
the machines without
special tools. Available with
crimp quality monitoring.
Specifications
Width—14 [355]
Depth—18 [457]
Height—33 [838] without reel
Weight—150 lb [68 kg]
Electrical—120 VAC, 50 or
60 Hz, .5 A
Air—80-100 psi [5.52-6.90 bar],
3.5 scfm [0.00165 m3/s]
Wire Range—32-14 AWG
[0.03-2 mm2]
For more information, request
Catalog 65004, Video 198075,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
For Crimp Snap-In
Receptacles and Locking
Clip Contacts (Continued)
Cosmic 927R
Micro-Cable Stripper
The Cosmic 927R
Micro-Cable Stripper was
developed to reliably strip
various insulation materials
and micro-cable. From
conductor diameter 36 AWG
to 10 AWG, the stripping
diameter display can be set
to within 0.1mm increments.
Thus optimal stripping
quality is guaranteed and
damage to the conductor is
eliminated.
Note: All part numbers are RoHS
compliant. Note: For additional tooling options, contact Tyco Electronics or reference the Tyco Electronics web site.
302
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Application Tooling (Continued)
AMPMODU Interconnection System
Application Tooling
7
Note: For additional tooling options, contact Tyco Electronics or reference the Tyco Electronics web site.
All CERTI-CRIMP head
assemblies / dies, have
multiple power options
available. The
accompanying diagram
outlines those power
options. See catalogs
1654714 (SDE Electric
Terminator), 124208 (626
Pneumatic Tool System) and
1773381(Battery-Powered
Crimp Tool Kits) for more
information.
For more information, request
Catalog 65780.
CERTI-CRIMP Straight
Action Hand Tools (SAHT)
Premium grade hand tools.
Feature ratchet control to
provide complete crimp
cycle. Die sets close in a
straight line. Include a
contact locator and wire
stop, plus an insulation
crimp adjustment lever,
when applicable.
Approximate weight 1.3 lb
[0.59 kg]
All PRO-CRIMPER head
assemblies / dies, have
multiple power options
available. The
accompanying diagram
outlines those power
options. See catalogs
1654714 (SDE Electric
Terminator), 124208 (626
Pneumatic Tool System) and
1773381(Battery-Powered
Crimp Tool Kits) for more
information.
Instruction Sheet
408-9930
PRO-CRIMPER III
Hand Tool
Commercial grade hand
tool for crimping various
products. Features ratchet
control to provide complete
crimp cycle. Accepts both
pinned- and shouldered-
style die sets. Locators are
provided with pinned-style
die sets for proper contact
and wire positioning, and
to help minimize contact
rotation and bending during
crimping. Approximate
weight 1.3 lb [0.60 kg].
For Crimp Snap-In
Receptacles and Locking
Clip Contacts (Continued)
303
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Application Tooling (Continued)
AMPMODU Interconnection System
Application Tooling
7
Note: All part numbers are RoHS
compliant. Note: For additional tooling options, contact Tyco Electronics or reference the Tyco Electronics web site.
For Board Mount
Receptacles and Machine
Applied Posts
Bench machines for insert-
ing a variety of products
into pc boards. Uses the
same interchangeable
insertion heads as the
Comp-U-Sertor II Machines.
Series 217600 machines
feature a manually-operated
X-Y positioning fixture, plus
a locator spotlight. The
machine cycles when the
board hole is placed on the
anvil and both triggers on
the dual handles attached
to the X-Y fixture are
depressed. Series 662820
machines, without board
fixturing, cycle automatically
when the hole is properly
located. A stabilizing disk
over the anvil helps keep
the board level.
This benchtop insertion
machine installs contacts
into PC boards at rates to
2000 per hour. A spotlight
highlights the insertion area,
and lower tooling assures
precise board location.
The machine is activated
by a foot pedal.
Specifications
Width — 18 [457]
Depth — 24 [610]
Height — 18 [457]
Weight — 250 lb [113 kg]
Electrical — 120 to 220 VAC,
50 or 60 Hz (217600); 120 or
240 VAC, 60 Hz, single phase,
120 VA (662820)
Air — 80 psi [5.52 bar] min.,
15 scfm [0.00708 m3/s] min.
Insertable Area — 18 x 22
[457 x 559] max.
For more information, request
Catalog 296059.
Modular Insertion System
(MIS) Bench Machines,
217600 Series,
662820 Series (shown)
For Board Mount Receptacles
Automatic machine for
inserting a variety of con-
tacts into pc boards (PCBs).
Equipped with an insertion
tool (comprised of a prod-
uct-specific insertion head,
an anvil, and a product feed
mechanism). Stepper-motor
driven X-Y table positions
PCBs under insertion head.
Surface Mount Equipment
Manufacturers Association
(SMEMA) compatible inline
PCB Insertion Station for
posts, tabs, receptacles or
sockets. Stand-alone unit is
field upgradeable to Pass
Through. Mounts up to four
Tyco Electronics pneumatic
insertion heads. Modem
diagnostics standard, vision
system optional. Control
panel used to program and
monitor entire insertion
process.
Specifications
Width — 57.5 [1 460]
Depth — 64.5 [1 640]
Height — 60 [1 520]
Weight — Depending on
configuration
Electrical — 110 V, 60 Hz
Air — 87 psi [6 bar]
Insertable Area — 24 x 16
[600 x 400]
For more information, contact
Tyco Electronics.
P300 Automatic Insertion
Machine
304
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Application Tooling (Continued)
AMPMODU Interconnection System
Application Tooling
7
For Board Mount
Receptacles and Machine
Applied Posts (Continued)
P350 Pin Insertion Machine
The P350 is a fully
automatic inline pin
insertion machine capable
of applying reeled pins,
tabs, receptacles and
similar products into PCBs.
With inline operation, an
automatic tool changer and
insertion rates up to 5 per
second, it is focused at fully
automatic high speed
operation to maximize
throughput while minimizing
costly scrap.
A servo powered XY table
positions the PCB under a
central drive station at high
speed. The tool changer
can hold up to 3 insertion
heads each capable of
applying a different product.
A unique rotary insertion
finger allows the application
of products at up to 7
different angles without
rotating the PCB. This
allows the P350 to apply
product at different angles
without a reduction in
insertion rate or the
potential positioning error
associated with PCB
rotation. Icon driven
software with touch screen
provides a simple to use,
intuitive operator interface.
The P350 provides a wide
range of solutions for pin
insertion applications.
Quick change tooling
packs, and a wide range of
options make it a flexible
high speed platform.
Specifications
Width — 102 [2600]
Depth — 118 [3000]
Height — 87 [2200]
Weight — approx 3500 lb
[1600 kg]
Electrical — 230 V, 50-60 Hz,
10 A
Air — 600 kPa dried air
Max. Board Size — 17.5 x 17.5
[450 x 450]
305
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Performance Specifications
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Product Specifications
7
Mechanical Characteristics
Contact Durability
Receptacles Locking
Plating Standard High Clip
Pressure Pressure Contacts
.000016 [0.00041] Min. Tin 75 Cycles 25 Cycles N/A
.000079 [0.00201] Min. Tin 75 Cycles 25 Cycles N/A
.000100 [0.00254] Min. Tin N/A N/A 25 Cycles
.000015 [0.00038] Gold 75 Cycles 50 Cycles 25 Cycles
.000030 [0.00076] Gold 200 Cycles 100 Cycles N/A
Connector Durability
Receptacles
Mating – 16 oz. [4.45N] max. per contact after 3 mating cycles
(standard pressure)
–30 oz. [8.34N] max. per contact after 3 mating cycles
(high pressure, gold)
–60 oz. [16.68N] max. per contact after 3 mating cycles (high pressure, tin)
Unmating – 1 oz. [0.28N] min. per contact after 3 mating cycles (standard pressure)
3 oz. [0.83N] min. per contact after 3 mating cycles (high pressure)
Locking Clip Contacts
Mating – 4 lb. [17.79N] max. per contact after 3 mating cycles
Unmating – 2 lb. [8.90N] min. per contact after 3 mating cycles
Environmental Characteristics
Operating Temperature — -65°C to 105°C [-85°F to 221°F] (Gold Plated)
-65°C to 60°C [-85°F to 140°F] (Tin Plated)
The electrical, mechanical
and environmental charac-
teristics of the AMPMODU
.031 x .062 [0.79 x 1.57]
Interconnection System are
listed below:
Electrical Characteristics
Contact Current Rating —
5 amperes max. for single contact in free
air, could vary due to ambient tempera-
ture, wire size and duty cycles.
Contact Resistance —
12 milliohms at 100 ma and 50 mv open
circuit.
Dielectric Rating —
At Sea Level – 1200 VAC between con-
tacts on .156 [3.96] centers for 1 minute.
Insulation Resistance — 5 x 103
megohms (initial)
Various technical docu-
ments are available for your
use:
Product Specifications
describe technical perform-
ance characteristics and
verification tests. They are
intended for the Design,
Component and Quality
Engineer.
108-25016 Interconnection System,
Standard Pressure
108-25025 Interconnection System,
High Pressure, Gold
108-25025-1 Interconnection System,
High Pressure, Tin
108-36029 Locking Clip Connectors
Application Specifications
describe requirements for
using the product in its
intended application and/or
crimping information.
They are intended for the
Packaging and Design
Engineer and the Machine
Setup Person.
114-25000 Crimp Snap-In Receptacle
Contacts
114-25004 Board Mount Receptacle
Contacts
114-25008 Locking Clip Contacts
114-25011 Machine Applied Straight
Posts
Instruction Sheets provide
instructions for assembling
or applying the product.
They are intended for the
Manufacturing Assembler or
Operator.
408-7308 Clinching Procedures for
Header Assemblies
408-7411 Suggestions for Wave
Soldering AMPMODU
Receptacles
408-7594 Tyco Electronics Hand Tool
90274-2 for Crimping
Crimp Snap-In 18-22 AWG
Contacts
408-7750 Tyco Electronics Hand Tool
90328-1 for Crimping
Crimp Snap-In Contacts
(22-26 AWG)
408-7676 AMPMODU Locking Clip
Connectors and Contacts
408-7671 Tyco Electronics Hand Tool
90308-1 for Crimping
Locking Clip Contacts
408-7678 Tyco Electronics Extraction
Tool 91104-1 for Locking
Clip Contacts
408-7981 Clinching Procedures for
Receptacle Assemblies
408-9451 Tyco Electronics Extraction
Tool 843473-1 for Crimp
Snap-In Receptacles
Technical Documents
306
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Shunts
AMPMODU Interconnection System
Shunts
8
Tyco Electronics offers a
variety of high quality
shunts for low cost
manual programming.
Tyco Electronics 7600
Series Programmable
Shunts are designed on
the standard .100 x .300
[2.54 x 7.62] DIP spacing.
Tyco Electronics DIP Shunts
are a highly reliable, low
cost means of manually
programming various types
of electrical/electronic
equipment. The shunt
consists of a series of
conductive straps packaged
in a DIP configuration. The
straps can be retained intact
for a closed circuit or broken
with a hand tool to produce
an open circuit.
Tyco Electronics Post
Shunts mate with any
common pairs of square,
rectangular and round
posts. Post shunts come
in two-position low profile,
2 mm miniature, tandem
spring, dual beam, and
multiposition versions.
Among the options
available are choices of
gold or tin plating, beryllium
copper or phosphor bronze
contact material and shunts
with 94V-0 rated housing
spaces on .079 [2.00],
.100 [2.54] and .200 [5.08]
centers with the low profile
series requiring only .250
[6.35] clearance from the
pc board.
All Tyco Electronics
shunts feature one-piece
construction for high
reliability. All have high
normal forces for excellent
electrical continuity. For
added reliability, Tandem
Spring and Dual Beam
Shunts have two points of
contact in each receptacle.
Product Facts
■7600 Series Programmable
Shunts use conventional
.100 x .300 [2.54x7.62] DIP
leg spacing
■Post Shunts are used to
common pairs of .025 [0.64]
square posts, .025 [0.64]
diameter round posts and
.022 x .026 [0.56 x 0.66]
formed posts
Shunts
8
307
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Dual In-Line Package (DIP) Shunts — 7600 Series
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Standard Shunt
Standard Pressure
Material and Finish
Housing — Glass-filled polyester, UL
94V-0 rated
Contacts — Brass
Finish — Selectively plated .000100
min. tin on solder area over .000050
min. nickel on entire contact
Contact Lead Spacing —
.100 x .300 [2.54x7.62]
Lead Length — .140 [3.56] below
mounting surface
Housing Color — Black
Programming Tool — See below
Programming Hand Tool
Part No. 435862-1
This tool provides a reliable means of
programming DIP shunts. It is rugged,
light-weight and dependable. No special
skills are required to use this tool.
.290
[7.37]
15° Max.
Ty p .
.079
[2.01]
.300
[7.62 ]
± .005
± 0.13
.100
[2.54 ]
± .005
± 0.13
.035
[0.89 ]
± .005
± 0.13
Ty p . Dia. Typ.
No. of Dimension A Standard Shunt
Pos. inch mm Standard Pressure
4 .400 10.16 1825190-4
6 .600 15.24 1825190-6
7 .700 17.781825190-7
8.800 20.321825190-8
9 .900 22.861825190-9
10 1.000 25.40 1-1825190-0
12 1.200 30.481-1825190-2
308
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Post Shunts
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Shunts
8
Part Numbers
Configuration Housing Gold Plate1Gold Plate1Tin Plate
Color .000015 .000030 .000100
[0.00038] [0.00076] [0.00254]
Strip of 10 Black 531230-2 531230-3531230-1
1In contact area
Product Facts
■One-piece contact
construction
■High normal forces
■94V-0 rated housings
■Gold inlay, gold plate or tin
plate over nickel
■Stackable
■Those post shunts indicated
are recognized under the
component program of
Underwriters
Laboratories Inc.,
File No. E28476
and certified by the
Canadian Standards
Association
File No. LR 7189
Tandem Spring Shunts
■Two points of contact
provide extra reliability
■Shunts accept posts as
short as .175 [4.45]; posts
bottom at .330 [8.38]
2mm Mini Shunts
■Stackable on 2mm contact
centerline
■Low profile
■Available in strips of 10
Material and Finish —
Low Profile and 2mm Shunts
Housing — Glass-filled thermoplastic,
black, UL 94V-0 rated
Contacts — Beryllium copper or
phosphor bronze, plated .000050
[0.00127] nickel underplate with gold
plate in contact area or tin overall
Material and Finish —
Tandem Spring Shunts
Housing — Nylon, UL 94V-0 rated
Contacts — Phosphor Bronze
Finish — .000030 [0.00076] nickel
underplate with gold inlay in the contact
area or tin overall
Standard Housing Shunt
.200 [5.08] Centerline
Part Numbers
Configuration Housing Gold Plate1Gold Flash1Tin Plate Gold Plate
Color .000015 .000005 .000100 .000030
[0.00038] [0.00013] [0.00254] [0.00076]
Strip of 10 Blue 382811-2 — — —
Strip of 10 Black 382811-6 382811-8382811-5 2-382811-0
Strip of 10 Red 382811-9 — — —
Loose Piece Black 1-382811-6 1-382811-8——
1In contact area
2.498
[63.45]
3.453
[87.70]
R
R
R
R
2-Position, Low Profile Shunts
Economy Shunt
.100 [2.54] Centerline
309
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Post Shunts (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS
compliant.
Shunts
8
Part Numbers
Configuration Housing Gold Plate1Gold Plate1
Color .000015 .000030
[0.00038] [0.00076]
Strip of 10 Black 382575-2 382575-3
1In contact area
2-Position,
Low Profile Shunts (Novo)
(Continued)
Handle Shunt
.100 [2.54] Centerline
2 mm Mini-Shunt
.079 [2.00] Centerline
Dual Beam Shunt
Loose Piece Part Numbers
Housing Gold Plate1Gold Plate1Gold Plate1Tin Plate Type
Color .000015 .000030 .000050 .000100
[0.00038] [0.00076] [0.00127] [0.00254]
Black 881545-1 881545-2 881545-34-881545-2 Open Top
Black 880584-1 880584-2 880584-3880584-4 Closed Top
1In contact area
Part Numbers
Configuration Housing Gold Plate1Gold Plate1Type
Color .000015 .000030
[0.00038] [0.00076]
Strip of 10 Black 390088-2 390088-1 Open Top
Strip of 10 Blue 390088-4 390088-3Open Top
Strip of 10 Yellow — 390088-5 Open Top
1In contact area
.096
[2.44]
2.500
[63.5]
Ref.
.196
[4.98]
Ref.
.247
[6.27]
Ref.
R
R
310
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Post Shunts (Continued)
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Shunts
8
Tandem Spring Shunt
.100 [2.54] Centerline
Multiposition Shunts
for.025 [0.64] Square Posts
.200 [5.08] Centerline
Part Numbers
Housing Gold Inlay1TinPlate
Color .000030 .000100
[0.00076] [0.00254]
Black 530153-2 4-530153-1
1In contact area
Housing — Glass-filled polyester
Contacts — Beryllium Copper
Finish — .000030 [.00076] gold in
contact area over .000050 [.00127]
nickel on entire contact
Current Rating — 2.5 amps
Dimension A Housing Part
Size inch mm Color Number
2x2 .246 6.25 Black 390102-1
2x2 .246 6.25 Red 390102-3
2x3.396 10.01 Black 390102-2
.250
[6.35]
MAX
.048
[1.22]
REF
.150
[3.81]
REF
A
.550
[13.97]
.300
[7.62]
MAX
.200
[5.08]
R
R
R
R
311
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Performance Specifications
AMPMODU Interconnection System
Shunts
8
Dual In-Line Package (DIP) Shunts — 7600 Series
Current Rating —
Standard pressure — 2 amperes for +20˚C rise above ambient (one conductor per shunt
Machine insertable — 1 ampere for +20˚C rise above ambient (one conductor per shunt)
Insulation Resistance — 1x 1010 ohms min. at 100 VDC
Dielectric Withstanding Voltage — 500 VDC min.
Capacitance — 2 picofarads max. between adjacent straps
Temperature Rating — -55˚C to +105˚C
Terminal Strength (Bend Test) — Two 45˚ bend cycles per MIL-STD-202, Method 211, Condition B
Solder Bridging —
Cut straps can be reconnected by solder bridging. Solder bridging recommendations are:
•Use low temperature solder (60/40 tin/lead)
•Use solder tip approximately 1/32 [0.79] in diameter
•Do not let solder tip come in contact with plastic material
Post Shunts
Current Rating —
3 amperes max. unless otherwise noted
Temperature Rating — -65˚C to +105˚C (gold) -40˚C to +85˚C (tin)
Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification
tests. They are intended for the Design, Component and Quality Engineer.
108-7533 Dual In-Line Package (DIP) Shunts
108-1445 2mm Mini Shunt
108-1476 Economy Shunt, Multiposition Shunt
108-1674 Dual Beam Shunt
108-9057 Low Profile Shunt
108-9062 Tandem Spring Shunt
108-37006 Novo Shunt with Handle
Application Specifications describe requirements for using the product in its intended
application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-1045 Tandem Spring Shunt
114-1054 Dual In-Line Package (DIP) Shunts
114-1059 Economy Shunt, Dual Beam Shunt, Low Profile Shunt, Multiposition
Shunt
114-1074 2mm Mini Shunt
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-7768 Dual In-Line Package (DIP) Shunts
408-3208 Tandem Spring Shunt
408-3230 Economy Shunt, Dual Beam Shunt, Low Profile Shunt
408-3251 Multiposition Shunt
408-3276 2mm Mini Shunt
AMPMODU Interconnection System
312
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Engineering Notes
8
Part Number Index
AMPMODU Interconnection System
Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
313
Part No. Page
102104 290
102106 290
102107 211
102114 203
102128 210, 213
102185 255, 258, 259
102198 139, 140
102202 115, 210
102203 85, 116
102241 210, 215
102312 258, 259
102316 213
102338 203
102348 211
102387 210, 220
102393 256
102394 256
102395 265
102396 255, 259
102398 255, 256
102399 265
102448 256
102449 265
102523 116
102536 255, 259
102537 255, 259
102540 255, 259
102541 255, 259
102548 213
102557 149
102567 198
102570 124, 125
102589 193, 200
102617 122, 123
102618 117, 118
102619 119, 120
102620 127
102641 265
102642 265
102666 199
102681 255, 259
102690 193, 199
102691 199
102692 198
102693 257
102694 257
102695 257
102699 85, 148
102742 177
102766 142
102777 199
102783 262, 263
102784 262, 263
102785 262, 263
102786 262, 263
102787 262, 263
102788 262, 263
102789 263
102791 264
102792 264
102802 200
102823 259
Part No. Page
87227 85, 96, 97
87230 85, 98, 99
87232 85, 94, 95, 210, 221
87233 94, 95
87247 295
87258 297
87262 295
87269 298
87270 299
87278 298
87283 296
87309 213
87316 286
87456 210, 216
87474 129
87483 210
87496 133
87499 210, 214
87523 213
87568 127
87572 126
87577 124, 125
87579 122, 123
87587 119, 120
87589 117, 118
87605 85, 131
87608 130
87623 163
87631 210, 218, 219
87654 297
87655 297
87666 213
87667 213
87710 218
87733 219
87743 204
87756 210, 213
87772 286
87774 286
87809 213
87878 163
87879 85, 177
87921 218
87922 218, 219
87977 210, 217
87983 287
87984 287
87985 287
87986 287
87987 289
87988 289
87989 287
87990 287
87993 287
87995 289
102055 126
102090 292
102095 211
102099 290
102100 290
102102 290
102103 290
Part No. Page
19156 139, 140
57013 58
57038 58
57118 58
57119 58
57131 58, 59
57138 58
57139 58
57144 58
57145 58
57288 58
57289 58
57290 58
85487 286
85493 286
85829 295
85839 296
85840 296
85875 296
85923 296
85969 213
86016 213
86147 294
86177 216
86181 285, 287, 288
86182 294
86207 296
86286 169, 172, 175-177,
180, 182, 189, 191,
195-197, 214-218, 220,
256, 257
86432 286
86434 286
86477 286
86479 98, 99
86480 286
86492 213
87003 286
87022 163
87025 291
87046 213
87077 214-218, 220,
256, 257
87105 286
87107 211
87116 293
87124 207
87131 209
87132 209
87133 209
87159 293
87160 295
87165 207
87175 208
87176 209
87179 208, 209
87190 207
87191 207
87194 297
87195 213
87215 96, 97
87220 85, 93
87224 93
Part Number Index
AMPMODU Interconnection System
Part Number Index (Continued)
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
314
Part No. Page
104895 19
104905 208
104909 245
104910 245
104935 247
111196 56
146079 163
146128 109
146129 109
146130 110
146131 110
146132 86, 109
146133 109
146134 86, 110
146135 110
146138 178
146205 202
146250 104, 107
146252 104, 107
146253 104, 107
146254 104, 107
146256 104, 107
146257 85, 104, 107
146258 104
146260 104
146261 104
146262 104
146264 104
146265 104
146266 104
146268 85, 104
146269 104
146270 104
146272 104
146273 104
146274 102, 107
146276 102, 107
146277 102, 107
146278 102, 107
146280 102, 107
146281 85, 102, 107
146282 102
146284 102
146285 102
146286 102
146288 102
146289 102
146290 102
146292 102
146293 85, 102
146294 102
146296 102
146297 102
146304 85, 103
146305 103
146306 85, 103
146307 103
146308 85, 105
146309 105
146310 105
146311 105
146315 202
Part No. Page
103960 231
103961 231
103968 233
103969 233
103970 233
103971 233
103972 233
103973 233
103974 229
103975 229
103976 229
103977 229
103978 229
103979 229
104068 30
104069 29
104071 28
104074 27
104076 31
104078 40
104118 34
104178 33
104186 32
104192 38
104196 37
104257 221, 231
104271 261, 263
104272 261, 263
104317 121
104319 128
104361 250
104362 245
104363 245
104438 234
104439 234
104450 221, 248
104477 29
104479 221, 222, 253
104480 221, 222, 253
104481 221, 222, 253
104482 221, 223
104483 224
104500 241
104503 239
104505 254
104506 254
104549 44
104550 45
104583 282
104584 282
104652 15
104655 16
104656 16
104666 30
104693 16
104744 40
104804 28
104809 249
104891 22
104892 21
104893 21
104894 19
Part No. Page
102826 144
102871 143
102898 146
102903 263
102917 213
102918 213
102920 213
102935 280
102972 107
102973 107
102976 107
102977 107
102985 263
102987 261, 263
102988 261, 263
102991 264
103056 281
103058 281
103080 115
103136 261, 263
103137 261, 263
103138 262, 263
103139 262, 263
103140 262, 263
103141 262, 263
103152 261, 263
103153 261, 263
103157 261, 263
103158 261, 263
103164 85, 126
103165 127
103166 85, 122, 123,
210, 255
103167 124, 125
103168 85, 117, 118,
210, 255
103169 119, 120
103171 213
103185 107
103186 107
103233 147
103239 107
103240 107
103264 193, 201
103268 259
103291 199
103321 107
103322 107
103327 107
103328 107
103336 85, 146
103340 261, 263
103341 261, 263
103349 281
103350 281
103361 116
103414 85, 115
103455 213
103542 85, 147
103577 85, 163
103634 247
103635 247
Part No. Page
103639 245
103640 231
103641 231
103644 231
103645 231
103648 233
103649 233
103650 233
103651 233
103652 233
103653 237
103654 239
103655 239
103656 239
103657 239
103658 237
103659 237
103660 237
103661 237
103669 245
103672 247
103673 247
103680 240
103681 241
103682 242
103684 229
103685 229
103686 229
103687 229
103688 221, 229
103734 231
103735 245
103817 86, 100
103893 237
103894 237
103895 239
103896 239
103897 231
103900 233
103901 233
103902 229
103903 229
103904 247
103908 245
103911 39
103916 35
103944 237
103945 237
103946 237
103947 237
103948 237
103949 237
103950 239
103951 239
103952 239
103953 239
103954 239
103955 239
103956 231
103957 231
103958 231
103959 231
Part Number Index
AMPMODU Interconnection System
Part Number Index (Continued)
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
315
Part No. Page
1375582 252
1375583 252
1375791 7, 12
1375792 7
1375793 7, 12
1375794 7
1375795 6, 12
1375796 6
1375797 9
1375798 9
1375799 8
1375800 8
1375801 12
1375959 10
1375961 10
1375963 10
1375965 11
1375967 11
1445251 12
1445439 12
1445440 12
1445441 12
1470108 79
1470109 78
1470209 80
1470213 66
1734493 75
1734506 81
1734507 67
1734508 66
1734516 84
1734531 83
1734569 77
1734606 82
1734770 73
1825190 307
1825851 139, 140, 210
2041068 76
2041069 84
5084476 71
5084780 74
5086147 294
5086182 294
5102084 170
5102154 139, 210, 255
5102156 139
5102160 140
5102162 140
5103308 135
5103309 135
5103310 136
5103311 136
5104338 137
5104340 138
5111595 57
5146139 169
5146140 170
5147721 86, 172
5147722 86, 173
5147732 172
5147733 172
5147734 173
Part No. Page
147740 192
147741 192
147742 187
147743 187
147744 187
147745 190
147746 190
147747 190
173144 155, 156
173145 155, 157, 158, 159
173146 155, 160, 161
219054 58
219055 58
219137 58
219138 58
219253 58
382575 309
382811 308
390088 309
390102 310
487544 50
487545 50
487547 48
487576 54
487923 48
487937 52
487938 52
487940 48
487941 48
499991 205
530153 310
530554 267
530901 269
530902 268
531226 267, 268
531230 308
532955 195
532956 193, 195
533009 195
534204 195
534206 85, 176
534237 85, 175
534245 200
534257 198
534258 201
534267 85, 182
534972 193, 196
534974 193, 197
534975 195
534978 198
534998 85, 179, 180
535541 85, 178
535542 86, 183, 184
535584 178
535585 179, 180
535598 179, 180
746383 139, 140
867052 207
880584 309
881545 309
966926 72
1375549 252
Part No. Page
146852 107
146853 107
146858 107
146859 107
146860 107
146861 107
146868 107
146869 107
146870 107
146871 107
147030 235
147070 86, 167
147071 167
147072 167
147095 183, 184
147096 183, 184
147099 182
147100 182
147101 190
147102 190
147103 190
147104 192
147105 86, 192
147106 192
147121 16
147254 202
147278 251
147323 251
147324 251
147326 177
147333 86, 165
147334 165
147335 165
147377 44
147378 45
147381 16
147382 16
147383 16
147384 15
147396 235
147413 15
147424 176
147433 165
147434 165
147435 165
147436 167
147437 167
147438 167
147503 16
147720 86, 181
147723 188
147724 187
147726 181
147727 181
147728 188
147729 188
147730 187
147731 187
147736 188
147737 188
147738 86, 188
147739 192
Part No. Page
146386 175
146427 85
146455 112
146456 112
146457 112
146458 112
146459 112
146460 112
146461 112
146462 112
146463 112
146464 112
146465 112
146466 112
146467 112
146468 112
146469 112
146470 112
146471 112
146472 112
146473 112
146474 86, 112
146475 112
146476 112
146477 112
146478 112
146479 112
146480 112
146481 112
146482 112
146483 113
146484 113
146485 113
146486 113
146487 113
146488 113
146489 113
146490 85, 113
146491 113
146492 113
146493 113
146494 113
146495 113
146496 113
146497 113
146498 113
146499 113
146500 113
146501 113
146502 113
146503 113
146504 113
146505 113
146506 113
146507 113
146508 113
146509 113
146510 113
146762 176
146763 175
146850 107
146851 107
58062 273
58074 273
58075 273
58336 273
58338 273
58342 254
58395 273
58540 273
58641 211, 213
90273 60
90274 290
90295 207
90308 298
90328 290
90381 211
90431 207
91047 60
91084 207
91085 62
91104 298
91112 62
91169 152
91170 152
91171 152
91200 60
91295 23
91410 263
91419 163
91516 213
91517 211, 213
91518 222, 253
91531 254
91533 207
91541 213
91551 222, 253
Part No. Page
104072 253
217600 153, 164, 166, 303
224910 48, 60
265871 152
265964 152
308554 152
312522 274
318619 48, 60
354500 300
354786 275
356484 60
356500 300
380392 152
466007 298
466376 286
466562 213
466571 213
466655 213
466721 207
466723 269
466763 290
466764 290
466812 211
466819 269
466905 213
466918 213
466921 213
466937 290
466943 269
466950 298
466952 269
466980 222, 253
466981 222, 253
466982 222, 253
466983 254
Part No. Page
527116 263
543518 23
547178 301
565967 286
567239 254
567296 222, 253
567297 222, 253
567298 222, 253
567307 211
567310 207
662820 303
679167 62
679996 207
758030 162
761420 275
768338 62
812665 263
843473 290
843477 253, 254, 265
843996 214, 215, 216,
217, 218, 219, 220
854040 301
854449 274
856002 274
856675 273
904507 163
904590 163
904591 163
904592 163
904640 166
904641 164
907459 162
931800 273
1213400 300
Part No. Page
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Tooling Part Number Index
Part Number Index
AMPMODU Interconnection System
Part Number Index (Continued)
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
316
Part No. Page
5535512 85, 170
5535676 85, 169
5535677 169
Part No. Page
5531216 269
5531224 269
5531225 269
Part No. Page
5147735 173
5176264 70
5176837 68
Part No. Page
5178751 70
5530553 269
5530901 269
Engineering Notes
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
317
AMPMODU Interconnection System
AMPMODU Interconnection System
318
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a
Engineering Notes
1307819–7.5M–LUG–FP–8-08 Tyco Electronics Corporation
Printed in the U.S.A. www.tycoelectronics.com
Global Contacts
Americas
Argentina – Buenos Aires
Phone: +54-11-4733-2200
Fax: +54-11-4733-2211
Brasil – São Paulo
Phone: +55-11-2103-6000
Fax: +55-11-2103-6030
Chile – Santiago
Phone: +56-2-345-0361
Fax: +56-2-223-1477
Canada – Toronto
Phone: +905-475-6222
Fax: +905-474-5520
Product Information Center:
Phone: +905-470-4425
Fax: +905-474-5525
Colombia – Bogota
Phone: +57-1-319-8959
Fax: +57-1-319-8960
Mexico – Mexico City
Phone: +52-55-1106-0800
+01-800-733-8926
Fax: +52-55-1106-0901
For Latin/South American
Countries not shown
Phone: +54-11-4733-2015
Fax: +54-11-4733-2083
United States
Harrisburg, PA
Phone: +1-717-564-0100
Fax: +1-717-986-7575
Product Information Center:
Phone: +1-800-522-6752
Fax: +1-717-986-7575
Troy, MI
Phone: +1-248-273-3359
Fax: +1-248-273-3322
Asia/Pacific
Australia – Sydney
Phone: +61-2-9554-2600
Fax: +61-2-9502-2556
Product Information Center:
Phone: +61-2-9840-8200
Fax: +61-2-9634-6188
India – Bangalore
Phone: +91-80-285-40800
Fax: +91-80-285-40820
Indonesia – Jakarta
Phone: +65-6482-0311
Fax: +65-6482-1012
Japan – Kawasaki, Kanagawa
Phone: +81-44-844-8111
Fax: +81-44-812-3207
Product Information Center:
Phone: +81-44-844-8013
Fax: +81-44-812-3200
Korea – Seoul
Phone: +82-2-3415-4500
Fax: +82-2-3486-3810
Malaysia – Selangor
Phone: +60-3-7805-3055
Fax: +60-3-7805-3066
New Zealand – Auckland
Phone: +64-9-634-4580
Fax: +64-9-634-4586
Philippines – Makati City
Phone: +632-848-0171
Fax: +632-867-8661
People’s Republic of China
Hong Kong
Phone: +852-2735-1628
Fax: +852-2735-0243
Shanghai
Phone: +86-21-2407-1588
Fax: +86-21-2407-1599
Singapore – Singapore
Phone: +65-6482-0311
Fax: +65-6482-1012
Taiwan – Taipei
Phone: +886-2-8768-2788
Fax: +886-2-8768-2268
Thailand – Bangkok
Phone: +66-2-955-0500
Fax: +66-2-955-0505
Vietnam – Ho Chi Minh City
Phone: +84-8-930-5546
Fax: +84-8-930-3443
Europe/Middle East/Africa
Austria – Vienna
Phone: +43-1-905-60-0
Fax: +43-1-905-60-1333
Product Information Center:
Phone: +43-1-905-60-1249
Fax: +43-1-905-60-1251
Belarus – Minsk
Phone: +375 17 237 47 94
Fax: +375 17 237 47 94
Belgium – Kessel-Lo
Phone: +32-16-352-300
Fax: +32-16-352-355
Bulgaria – Sofia
Phone: +359-2-971-2152
Fax: +359-2-971-2153
Czech Republic and Slovakia
Czech Republic – Kurim
Phone: +420-541-162-111
Fax: +420-541-162-223
Product Information Center:
Phone: +420-541-162-113
Fax: +420-541-162-132
Denmark – Glostrup
Phone: +45-43-48-04-00
Fax: +45-43-44-14-14
Egypt – Cairo
Phone: +202-419-2334
Fax: +202-417-7647
Estonia – Tartu
Phone: +372-5138-274
Fax: +372-7400-779
Finland – Helsinki
Phone: +358-95-12-34-20
Fax: +358-95-12-34-250
France – Cergy-Pontoise Cedex
Phone: +33-1-3420-8888
Fax: +33-1-3420-8600
Product Information Center:
Phone: +33-1-3420-8686
Fax: +33-1-3420-8623
France Export Divisions –
Cergy-Pontoise Cedex
Phone: +33-1-3420-8804
Fax: +33-1-3420-8699
Germany – Bensheim
Phone: +49-6251-133-0
Fax: +49-6251-133-1600
Product Information Center:
Phone: +49-6251-133-1999
Fax: +49-6251-133-1988
Greece – Athens
Phone: +30-210-9370-
396/397
Fax: +30-210-9370-655
Hungary – Budapest
Phone: +36-1-289-1000
Fax: +36-1-289-1010
Product Information Center:
Phone: +36-1-289-1016
Fax: +36-1-289-1017
Ireland – Dublin
Phone: +353-1-866-5612
Fax: +353-1-866-5714
Israel – Petach-Tikva
Phone: +972-3-929-0999
Fax: +972-3-919-1088
Italy – Collegno (Torino)
Phone: +39-011-4012-111
Fax: +39-011-4031-116
Product Information Center:
Phone: +39-011-4012-428
Fax: +39-011-40-287-428
Lithuania and Latvia
Lithuania – Vilnius
Phone: +370-5-213-1402
Fax: +370-5-213-1403
Product Information Center:
Phone: +370-5-211-3016
Fax: +370-5-213-1403
Netherlands – ’s-
Hertogenbosch
Phone: +31-73-6246-246
Fax: +31-73-6212-365
Product Information Center:
Phone: +31-73-6246-999
Fax: +31-73-6246-998
Norway – Nesbru
Phone: +47-66-77-88-50
Fax: +47-66-77-88-55
Poland – Warsaw
Phone: +48-22-4576-700
Fax: +48-22-4576-720
Product Information Center:
Phone: +48-22-4576-704
Fax: +48-22-4576-720
Romania – Bucharest
Phone: +40-21-311-3479/3596
Fax: +40-21-312-0574
Russia – Moscow
Phone: +7-495-790-7902
Fax: +7-495-721-1893
Product Information Center:
Phone: +7-495-790-7902-404
Fax: +7-495-790-7902-401
Russia – St. Petersburg
Phone: +7-812-718-8192
Fax: +7-812-718-8193
Slovenia – Ljubljana
Phone: +386-1561-3270
Fax: +386-1561-3240
South Africa – Port Elizabeth
Phone: +27-41-503-4500
Fax: +27-41-581-0440
Spain – Barcelona
Phone: +34-93-291-0330
Fax: +34-93-201-7879
Sweden – Upplands Väsby
Phone: +46-8-50-72-50-00
Fax: +46-8-50-72-50-01
Switzerland – Steinach
Phone: +41-71-447-0447
Fax: +41-71-447-0444
Turkey – Istanbul
Phone: +90-212-281-8181/2/3
+90-212-282-
5130/5430
Fax: +90-212-281-8184
Ukraine – Kiev
Phone: +380-44-206-2265
Fax: +380-44-206-2264
Product Information Center:
Phone: +380-44-206-2265
Fax: +380-44-206-2264
United Kingdom –
Stanmore, Middlesex
Phone: +44-8706-080208
Fax: +44-208-954-6234
Product Information Center:
Freephone (UK only):
+0800-267-666
Phone: +44-8706-080208
Fax: +44-208-420-8095
Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
1307819–7.5M–LUG–FP–8-08
AMPMODU
Interconnection System
Catalog 1307819 Revised 8-08 AMPMODU Interconnection System
