PANEL SWITCHES -IM 9 70 -1 IM series SW Sealed snap-action pushbutton switches * bushing O 12 mm * momentary DISTINCTIVE FEATURES Snap-action : tactile feedback with audible click High current/voltage rating Sealed to IP67 Flat round actuator for optional marking NO+NC ENVIRONMENTAL SPECIFICATIONS * Front panel sealing : IP67 according to IEC 60529 * Shock resistance : 50 g - 11 ms according to IEC 68-2-27 * Salt spray : IEC 512-6, test 11f * Operating temperature : -40 C to +85 C (-40 F to +185 F) * Storage temperature : -40 C to +85 C (-40 F to +185 F) ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : 3 A 28 VDC * Initial contact resistance : 100 m max. * Insulation resistance : 1 G min. at 500 VDC * Dielectric strength : 500 Vrms between terminals * Electrical life at full load : 25,000 cycles GENERAL SPECIFICATIONS * Panel thickness : 1.5 mm (.059) to 10 mm (.394) * Total travel : 1.7 mm (.067) 0.3 mm * Low level or mechanical life : 1,000,000 cycles * Torque (applied to nut) : 1 Nm max. with metal nut U166 1.5 Nm max. with plastic nut U4248 MATERIALS * Case : polyamide 4/6 * Actuator : polyamide 6/6 * Bushing/bezel : polyamide 6/6 * Contacts : silver, gold plated * Terminal seal : epoxy The company reserves the right to change specifications without notice. 1 B1 PANEL SWITCHES IM series Sealed snap-action pushbutton switches * bushing O 12 mm * momentary MOUNTING STANDARD BEZEL AGENCY APPROVAL (CONTINUED) 1 A 125 VAC/250 VAC File E83438 1.50min-10.00Max (.059MIN.-.393MAX.) 0 7) BACK OF PANEL SPACE REQUIREMENT 20.00 (.787) 20.00 (.787) 20 (.787) 20.00 (.787) Availability : consult factory for details of approved models. Marking : to order switches marked UL, complete 1 appropriate box of ordering format. O13.50 (.531DIA) TERMINALS CIMCZ CIMCZ ELECTRICAL FUNCTIONS O13.60 (.535DIA) 2 2 O13.60 (.535DIA) CIMPE2 2 20 (.787) 17.50 (.689) - Flat seal O13.50 MATRIX MOUNTING (.531DIA) - O-ring CIMPE CIMPE CIM075234 20.00 (.787) CIMPE CIMPE CIMPE2 ECH1 ECH1 20 (.787) 20.00 (.787) CIMPE2 O13.50O13.50 (.531DIA) (.531DIA) ECH1 le 29/03/2012 20.00 (.787) 234 20 (.787) 17.50 (.689) 20.00 (.787) 17.50 (.689) 075 BACK OF PANEL SPACE REQUIREMENT 20.00 (.787) 1.50min-10.00Max (.059MIN.-.393MAX.) 1 20.00 20.00 20.00 20.00 (.787) (.787) (.787) (.787) 20 (.787) O13.60O13.60 (.535DIA) (.535DIA) 1.50min-10.00Max (.059MIN.-.393MAX.) 0.80min-4.30Max (.031MIN.-.169MAX.) 1 2 2 CIM075234 12.90 12.90 (.507) (.507) B1 ECH1 le 29/03/2012 O13.50 (.531DIA) O15.60 (.614DIA) PANEL CUT-OUT O15.60 (.614DIA) CIMPE2 MOUNTING STANDARD BEZEL 1.50min-10.00Max (.059MIN.-.393MAX.) CIMFCT Echelle 0.9 O15.00 (.590DIA) 17.50 (.689) 5.00 (.196) le 28/03/2012 le 28/03/2012 CIMFCT 17.50 (.689) 12.90 (.507) O15.00 (.590DIA) 17.50 (.689) 1.50min-10.00Max (.059MIN.-.393MAX.) 0.80min-4.30Max (.031MIN.-.169MAX.) ECH1 ECH1 3 - Flat seal MATRIX MOUNTING Function 7 (NC+NO) 2 O13.50 (.531DIA) O15.60 (.614DIA) CIMC CIMC 1 2 17.50 (.689) 2.40 (.094) 2.40 (.094) 12.90 (.507) Quick-connect Z CIMCPCIMCP PANEL CUT-OUT 20 (.787) Straight P 1.20 (.047) 1.20 (.047) 2.80 (.110) 1.50min-10.00Max (.059MIN.-.393MAX.) ECH1 le 28/03/2012 2.80 (.110) 0.80min-4.30Max (.031MIN.-.169MAX.) CIMPE MOUNTING REDUCED BEZEL 5.00 (.196) 1.00 (.039) 7.60 (.299) 7.60 (.299) 1.00 (.039) 3.50 (.138) 3.50 (.138) 3.70 (.146) 3.70 (.146) CIMPE le 28/03/2012 le 28/03/2012 Ech 0.9 LE 28/03/2012 Sealed snap-action pushbutton switches * bushing O 12 mm * momentary BUILD YOUR PART NUMBER BASIC PART NUMBER IM SERIES ACTUATOR SHAPES R Round, curved P Round, flat ELECTRICAL FUNCTION 7 NC + NO TERMINALS P Straight PC Z Quick-connect CONTACTS 4 Silver, gold plated (standard) Actuator marking available on round flat models (symbol 10 mm max.). On request. OPTIONS ACTUATOR COLORS 1 Blue B Dark blue 2 Black 3 Green 4 Grey 5 Yellow 6 Red 7 White 9 Orange BEZEL OPTIONS BUSHING & BEZEL 2 Black Other : on request ACTUATOR OPTION Blank Standard bezel Blank 075 Dia. 15 (.590) reduced bezel, front mounting 104 234 Dia. 15 (.590) reduced bezel, std mounting Std actuator High actuator APPROVAL UL Consult factory for detail of approved models. ABOUT THIS SERIES On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. Notice : please note that not all combinations of above numbers are available. Refer to the following pages for further information. A sealing boot is available to protect the switches against frost and sand (P/N U5125). See "Sealing Boots" section of website. Mounting accessories : Standard hardware supplied : 1 flat seal (standard bezel) or 1 O-ring (reduced bezel) and 1 metal hex nut 14 mm (.551) across flats. Hex nut part number U166. Plastic nut 17 mm (.669) across flats, thickness 4 mm (.157) available on request. Part number U4248. 3 PANEL SWITCHES IM series Sealed snap-action pushbutton switches * bushing O 12 mm * momentary Flat actuator O12.00 (.472DIA) 10.80 (.425) O12.00x0.75SI (.472DIAx0.75IS) 0.50 (.020) 3.35 (.132) 1.00 (.039) 2.80 (.110) 3.35 (.132) FLAT CIMR7P O12.00 (.472DIA) 2.00 (.078) 5.00 (.196) STANDARD BEZEL QUICK-CONNECT TERMINALSCIRSH 3.50 (.138) EPOXY NC+NO IMP7P4 O17.50 (.688DIA) 3.70 (.146) 5.00 (.196) NC+NO IMR7P4 18.1 (.713) Curved actuator Common terminal identified by a horizontal dash 2.00 (.078) FLAT STANDARD BEZEL STRAIGHT PC TERMINALS O17.50 (.688DIA) Page 10-11-12-13 Curved actuator CIRSH 10.80 (.425) O12.00x0.75SI (.472DIAx0.75IS) Page 10-11-12-13 CIMR7P NC+NO IMP7Z4 0.50 (.020) 3.35 (.132) 1.20 0.9 Ech (.047) 3.35 (.132) 7.60 (.299) EPOXY Flat actuator 2.40 (.094) IMR7Z4 NC+NO 22.00 (.866) PANEL SWITCHES IM series 2.80 (.110) LE 28/03/2012 CIMR7Z CIRSH BASIC P/N 1 B 2 3 4 5 6 7 9 ACTUATOR COLORS Page 10-11-12-13 CIRSH Blue Dark blue Black Green Grey Yellow Red White Orange Page 10-11-12-13 CIMR7Z Ech 0.9 LE 28/03/2012 BUSHING AND BEZEL BASIC P/N 2 Black (standard) Other : on request 4 Sealed snap-action pushbutton switches * bushing O 12 mm * momentary PANEL SWITCHES IM series BEZEL OPTIONS BASIC P/N O15.00 (.590DIA) 5.00 (.196) O15.00 (.590DIA) 5.00 (.196) Blank Standard bezel 075 Dia. 15 (.590) reduced bezel, mounting of the switch from the front into a threaded panel cut-out 234 Dia. 15 (.590) reduced bezel, standard mounting 2 2 CIM07523 075 075 234 234 ACTUATOR OPTION Standard actuator High actuator O12.00 (.472DIA) O12.00 (.472DIA) 4.70 (.185) Blank 104 4.70 (.185) BASIC P/N CIM075234 Ech 0.9 104 IMR 104 IMP LE 28/03/2012 AGENCY APPROVAL BASIC P/N UL Availability : consult factory for details of approved models. Marking : to order switches marked UL, complete appropriate box of ordering format. 5