• All specifications are subject to change without notice.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
3-terminal Filters, SMD Array
For signal line
(UHF band terrestrial digital broadcast / DVB-H band compatible)
MEA series
Type:
Issue date:
MEA1210PE 1210[0504 inch]*
MEA1608PE 1608[0603 inch]
MEA2010PE 2010[0804 inch]
* Dimensions Code JIS[EIA]
November 2011
• All specifications are subject to change without notice.
(1/6)
001-06 / 20111129 / e9621_mea_signal_03
3-terminal Filters, SMD Array
For Signal Line
(UHF Band Terrestrial Digital Broadcast / DVB-H Band Compatible)
MEA Series MEA1210PE
FEATURES
• 2-line LC filter are built in one chip for high-density circuit design.
• 0.5mm low profile.
• It is effective as a sensitivity suppression technique for mobile
phones.
• This product is suitable for the LCD signal lines in mobile phone.
TEMPERATURE RANGES
PRODUCT IDENTIFICATION
(1)Series name (5)Packaging style T:Taping
(2)Dimensions L×W (6)TDK internal code
(3)Type name
(4)Capacitance
E220: 22pF
PACKAGING STYLE AND QUANTITIES
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BORARD PATTERN (REFLOW)
ELECTRICAL CHARACTERISTICS
Conformity to RoHS Directive
Operating –40 to +85°C
Storage(After mount) –40 to +85°C
MEA 1210 P E220 T
(1) (2) (3) (4) (5) (6)
Packaging style Quantity
Taping 4000 pieces/reel
Part No. Rated voltage
(V)max.
Rated current
(mA)max.
Capacitance
(pF)
Attenuation(dB)typ.
[470MHz to 2GHz]
MEA1210PE220 6.3 100 22 20
MEA1210PE360 6.3 100 36 20
MEA1210PE400 6.3 100 40 20
0.65±0.05
Weight: 3.5mg
Dimensions in mm
1.0±0.15
0.5±0.1
GND
0.35±0.1 0.15min.
0.1min.
1.2±0.15
Marking
0.25±0.10.1min.
GND GND GND
CH1 CH2
Dimensions in mm
0.3
0.65
0.6
0.25
0.9
1.8
0.5
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
(2/6)
001-06 / 20111129 / e9621_mea_signal_03
TYPICAL ELECTRICAL CHARACTERISTICS
ATTENUATION vs. FREQUENCY CHARACTERISTICS
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
0
–10
–20
–30
–40
–50
–70
–60
Attenuation(dB)
10000
Frequency(MHz)
10 100 1000
MEA1210PE220
MEA1210PE360
MEA1210PE400
Natural
cooling
10s max.
Preheating
60 to 120s
Soldering
30 to 60s
230˚C
250 to 260˚C
180˚C
150˚C
Time(s)
• All specifications are subject to change without notice.
(3/6)
001-06 / 20111129 / e9621_mea_signal_03
3-terminal Filters, SMD Array
For Signal Line
(UHF Band Terrestrial Digital Broadcast / DVB-H Band Compatible)
MEA Series MEA1608PE
FEATURES
• 4-line LC filter are built in one chip for high-density circuit design.
• 0.5mm low profile.
• It is effective as a sensitivity suppression technique for mobile
phones.
• This product is suitable for the LCD signal lines in mobile phone.
APPLICATIONS
For LCD and camera signal lines in mobile phone.
TEMPERATURE RANGES
PRODUCT IDENTIFICATION
(1)Series name (5)Packaging style T:Taping
(2)Dimensions L×W (6)TDK internal code
(3)Type name
(4)Capacitance
E220: 22pF
PACKAGING STYLE AND QUANTITIES
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BORARD PATTERN (REFLOW)
ELECTRICAL CHARACTERISTICS
Conformity to RoHS Directive
Operating –40 to +85°C
Storage(After mount) –40 to +85°C
MEA 1608 P E220 T
(1) (2) (3) (4) (5) (6)
Packaging style Quantity
Taping 4000 pieces/reel
Part No. Rated voltage
(V)max.
Rated current
(mA)max.
Capacitance
(pF)
Cutoff frequency
(MHz)
MEA1608PE150 6.3 100 15 200
MEA1608PE220 6.3 100 22 200
MEA1608PE270 6.3 100 27 200
MEA1608PE360 6.3 100 36 200
MEA1608PE440 6.3 100 44 150
MEA1608PE540 6.3 100 54 150
Weight: 3.5mg
Dimensions in mm
1.6±0.1
0.8±0.1
0.10min.
0.5±0.1
0.2±0.1
GND GND
Marking
0.2±0.1 0.15min.
0.4±0.050.4±0.05 0.4±0.05
CH2
GND
GND
CH1 CH4CH3 0.2 to 0.25
2.0
0.025
0.15
0.5 0.35
0.15 to 0.2
0.4 0.04
0.35
Dimensions in mm
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
(4/6)
001-06 / 20111129 / e9621_mea_signal_03
TYPICAL ELECTRICAL CHARACTERISTICS
ATTENUATION vs. FREQUENCY CHARACTERISTICS
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
10000
Frequency(MHz)
10 100 1000
0
–10
–20
–30
–40
–50
–60
–80
–70
Attenuation(dB)
MEA1608PE150
MEA1608PE220
MEA1608PE270
10000
Frequency(MHz)
10 100 1000
0
–10
–20
–30
–40
–50
–60
–80
–70
Attenuation(dB)
MEA1608PE360
MEA1608PE440
MEA1608PE540
Natural
cooling
10s max.
Preheating
60 to 120s
Soldering
30 to 60s
230˚C
250 to 260˚C
180˚C
150˚C
Time(s)
• All specifications are subject to change without notice.
(5/6)
001-06 / 20111129 / e9621_mea_signal_03
3-terminal Filters, SMD Array
For Signal Line
(UHF Band Terrestrial Digital Broadcast / DVB-H Band Compatible)
MEA Series MEA2010PE
FEATURES
• 4-line LC filter are built in a one chip for high-density circuit
design.
• 0.7mm low profile.
• It is effective as a sensitivity suppression technique for mobile
phones.
• This product is suitable for the LCD signal lines in mobile phone.
APPLICATIONS
LCD for terrestrial digital broadcast and camera signal lines in
mobile phone.
TEMPERATURE RANGES
PRODUCT IDENTIFICATION
(1)Series name (5)Packaging style T:Taping
(2)Dimensions L×W (6)TDK internal code
(3)Type name
(4)Capacitance
E220: 22pF
PACKAGING STYLE AND QUANTITIES
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BORARD PATTERN (REFLOW)
ELECTRICAL CHARACTERISTICS
Conformity to RoHS Directive
Operating –40 to +85°C
Storage(After mount) –40 to +85°C
MEA 2010 P E220 T
(1) (2) (3) (4) (5) (6)
Packaging style Quantity
Taping 4000 pieces/reel
Part No. Rated voltage
(V)max.
Rated current
(mA)max.
Capacitance
(pF)
Attenuation(dB)typ.
[470MHz to 2GHz]
MEA2010PE150 6.3 100 15 10
MEA2010PE220 6.3 100 22 20
MEA2010PE360 6.3 100 36 20
MEA2010PE400 6.3 100 40 20
Weight: 7mg
Dimensions in mm
2.0±0.1
1.0±0.1
0.12min.
0.7±0.1
0.25±0.1
GND GND
0.25±0.1 0.15min.
0.5±0.050.5±0.05 0.5±0.05
Marking
CH2
GNDGND
CH1 CH4CH3
1.60
2.80
0.25
0.60
1.80
0.25
0.50
Dimensions in mm
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
(6/6)
001-06 / 20111129 / e9621_mea_signal_03
TYPICAL ELECTRICAL CHARACTERISTICS
ATTENUATION vs. FREQUENCY CHARACTERISTICS
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
0
–10
–20
–30
–40
–50
–60
Attenuation(dB)
1 10000
Frequency(MHz)
10 100 1000
MEA2010PE150
MEA2010PE220
MEA2010PE360
MEA2010PE400
Natural
cooling
10s max.
Preheating
60 to 120s
Soldering
30 to 60s
230˚C
250 to 260˚C
180˚C
150˚C
Time(s)
