SMP1302-011LF - SKYWORKS SOLUTIONS

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200043T • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 13, 2013 1

DATA SHEET

SMP1302 Series: Switch and Attenuator Plastic Packaged

PIN Diodes

Applications

• TV distribution and cellular base stations

• High volume switch and attenuators

Features

• Designed for base station and handset applications

• Low-distortion design

• Available in tape and reel packaging

• Packages rated MSL1 @ 260 °C per JEDEC J-STD-020

Description

The SMP1302 series of plastic packaged, surface mountable, low

capacitance (0.3 pF) silicon PIN diodes is designed for high-

volume switch and attenuator applications from 10 MHz to beyond

10 GHz.

These diodes are designed for use in low-distortion PI and TEE

attenuators with low drive current (maximum resistance at 1 mA

is 10 Ω) commonly used in TV distribution and cellular base

station applications. The nominal 50 μm I region width, combined

with a maximum resistance of 3 Ω at 10 mA, makes these diodes

useful in large signal switch applications.

The SMP1302 series provides single, dual, and quad diodes in a

selection of plastic packages including SOT-23, SOD-323, SC-79,

SC-70, SC-88, and a small footprint SOD-882.

A four-diode array is available in an SOT-5 package (SMP1302-

027) designed for insertion in the commonly used four-diode PI

attenuator circuits.

Table 1 describes the various packages and marking of the

SMP1302 series.

DATA SHEET • SMP1302 SERIES PIN DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

2 March 13, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200043T

Table 1. SMP1302 Series Packaging and Marking

Single Common Anode Common Cathode Series Pair Reverse Series

Pair Single PI Single

Quad

Common

Cathode

Single

SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOD-323

Green™ SOT-5 SC-79

Green™ SC-88 SOD-882

Green™

SMP1302-001

Marking: PF1

SMP1302-003

Marking: PF9

SMP1302-004

Marking: PF3

SMP1302-005

Marking: PFS

SMP1302-

027

Marking:

PFM

SMP1302-

078LF

Marking: XIX

SMP1302-

040LF

Marking: W

SMP1302-

001LF

Green™

Marking: RF1

SMP1302-003LF

Green™

Marking:RF9

SMP1302-004LF

Green™

Marking: RF3

SMP1302-005LF

Green™

Marking: RF2

SMP1302-

006LF

Green™

Marking: RF8

SMP1302-

011LF

Marking: RF

SMP1302-

027LF

Green™

Marking:

RFM

♦SMP1302

-079LF

LS = 1.5 nH LS = 1.5 nH LS = 1.5 nH LS = 1.5 nH LS = 1.5 nH LS = 1.5 nH LS = 0.7 nH LS = 1.4 nH LS = 0.45 nH

SC-70 SC-70

SMP1302-074

Marking: PF3

SMP1302-074LF

Green™

Marking: RF3

SMP1302-075LF

Green™

Marking: RF2

LS = 1.4 nH LS = 1.4 nH

The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as Green™. Tin/lead (Sn/Pb) packaging is not recommended

for new designs.

Innovation to Go™

Select Linear Products (indicated by ♦) now available for purchase online.

SMP1302-078LF Pinout

Table 2 provides the signal pin assignments for the 6-pin SC-88

quad common cathode package.

Electrical and Mechanical Specifications

The absolute maximum ratings of the SMP1302 series are

provided in Table 3. Electrical specifications are provided in

Table 4. Resistance versus temperature measurements are

provided in Table 5.

Typical performance characteristics of the SMP1302 series are

illustrated in Figures 1 to 4. Package dimensions are shown in

Figures 5 to 7 (odd numbers), and tape and reel dimensions are

provided in Figures 6 to 18 (even numbers).

DATA SHEET • SMP1302 SERIES PIN DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200043T • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 13, 2013 3

Table 2. SMP1302-078LF Pin Signals

Pin # Name Pin # Name

1 Anode 1 4 Anode 3

2 Common cathode 5 Common cathode

3 Anode 2 6 Anode 4

Table 3. SMP1302 Series Absolute Maximum Ratings

Parameter Symbol Minimum Maximum Units

Reverse voltage VR 200 V

Power dissipation @ 25 °C lead temperature PD 250 mW

Storage temperature TSTG –65 +150 °C

Operating temperature TA –65 +150 °C

Electrostatic Discharge, Human Body Model (HBM), Class 1C ESD 1000 2000 V

Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other

parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.

CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device

must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body

or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.

Table 4. SMP1302 Series Electrical Specifications (Note 1)

(TA = +25 °C, Unless Otherwise Noted)

Parameter Symbol Test Condition Min Typical Max Units

Reverse current IR VR = 200 V 10 μA

Capacitance (Note 2) CT f = 1 MHz, V = 30 V 0.3 pF

Resistance RS f = 100 MHz

I = 1 mA

I = 10 mA

I = 100 mA

1.5

Forward voltage VF IF = 10 mA 0.8 V

Carrier lifetime TI IF = 10 mA 0.7 μs

I region width 50 μm

Note 1: Performance is guaranteed only under the conditions listed in this Table.

Note 2: The SMP1302-027 maximum capacitance is 0.45 pF.

Package and Handling Information

Instructions on the shipping container label regarding exposure to

moisture after the container seal is broken must be followed.

Otherwise, problems related to moisture absorption may occur

when the part is subjected to high temperature during solder

assembly.

The SMP1302 series is rated to Moisture Sensitivity Level 1

(MSL1) at 260 °C. It can be used for lead or lead-free soldering.

For additional information, refer to the Skyworks Application Note,

Solder Reflow Information, document number 200164.

Care must be taken when attaching this product, whether it is

done manually or in a production solder reflow environment.

Production quantities of this product are shipped in a standard

tape and reel format.

DATA SHEET • SMP1302 SERIES PIN DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

4 March 13, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200043T

Table 5. Resistance vs Temperature @ 100 MHz

(mA)

RS @ –55 °C

(Ω)

RS @ –15 °C

(Ω)

RS @ +25 °C

(Ω)

RS @ +65 °C

(Ω)

RS @ +100 °C

(Ω)

0.02 599 653 692 715 722

0.10 123 135 143 154 161

0.3 42.2 46.6 49.7 54.3 56.8

1.0 13.5 15.0 16.2 17.9 18.8

10 2.0 2.3 2.6 2.9 3.0

20 1.34 1.50 1.70 2.00 2.00

100 0.60 0.74 1.00 1.10 1.10

Typical Performance Characteristics

(TA = +25 °C, Unless Otherwise Noted)

Figure 1. Series Resistance vs Current @ 100 MHz

Figure 3. Capacitance vs Reverse Voltage

Figure 2. DC Characteristic

Figure 4. Conductance vs Frequency and Reverse Voltage

DATA SHEET • SMP1302 SERIES PIN DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200043T • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 13, 2013 5

Figure 5. SC-70 Package Dimension Drawing

Figure 6. SC-70 Tape and Reel Dimensions

DATA SHEET • SMP1302 SERIES PIN DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

6 March 13, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200043T

Figure 7. SC-79 Package Dimension Drawing

Figure 8. SC-79 Tape and Reel Dimensions

DATA SHEET • SMP1302 SERIES PIN DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200043T • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 13, 2013 7

Figure 9. SC-88 Package Dimension Drawing

Figure 10. SC-88 Tape and Reel Dimensions

DATA SHEET • SMP1302 SERIES PIN DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

8 March 13, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200043T

Figure 11. SOD-323 Package Dimension Drawing

Figure 12. SOD-323 Tape and Reel Dimensions

DATA SHEET • SMP1302 SERIES PIN DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200043T • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 13, 2013 9

Figure 13. SOT-5 Package Dimension Drawing

FIgure 14. SOT-5 Tape and Reel Dimensions

DATA SHEET • SMP1302 SERIES PIN DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

10 March 13, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200043T

Figure 15. SOT-23 Package Dimension Drawing

Figure 16. SOT-23 Tape and Reel Dimensions

DATA SHEET • SMP1302 SERIES PIN DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200043T • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 13, 2013 11

Figure 17. SOD-882 Package Dimension Drawing

Figure 18. SOD-882 Tape and Reel Dimensions

DATA SHEET • SMP1302 SERIES PIN DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

12 March 13, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200043T

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by

Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the

information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to

update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or

information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of

Sale.

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A

PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY

DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS

SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,

LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,

death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any

damages resulting from such improper use or sale.

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of

products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for

applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.

Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands

and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,

are incorporated by reference.