19710257 - EBT Optronic GmBH & Co. KG

LED Indicators

542

ALLIED Products Not Cataloged Are Available Ñ Call 1-800-433-5700 For Price And Delivery

Features

Proof Against Shock and Vibration

Extremely Long Life Ñ Up to 100,000 Hours

Low Power Consumption

Low Heat Generation

Typical Payback Ñ Less than 1 Year

Made in Germany

M8 LED Indicators

For 8/8.2 mm (0.315"/0.323") mounting hole. High brightness

colored diffused T-1

LEDs are fitted in high quality satin chrome,

black chrome or brushed satin chrome metal bezels, fitted with

fixing nut and washer. Connection is by faston/solder tab terminals

2.8 ´0.8 mm (0.110" ´0.031"). Brass terminal = anode; brass

tinned terminal = cathode.

M8 with Exterior Bezel

IP 40, for a maximum panel thickness of 5.5 mm (0.217").

234-X001 1904X251 1 Green 12 VDC 20 2.66 2.28

234-X002 1904X252 1 Yellow 12 VDC 20 4.36 3.74

234-X003 1904X253 1 Red 12 VDC 20 2.66 2.28

234-X004 1904X257 1 Blue 12 VDC 20 4.36 3.74

234-X005 1904X351 1 Green 24 VDC 20 2.72 2.33

234-X006 1904X352 1 Yellow 24 VDC 20 2.66 2.29

234-X007 1904X353 1 Red 24 VDC 20 2.67 2.28

234-X008 1904X357 1 Blue 24 VDC 20 4.36 3.74

234-X009 1951X330 2 Red 130 VAC 5 5.18 4.44

234-X010 1951X331 2 Green 130 VAC 5 5.07 4.34

234-X011 1951X332 2 Yellow 130 VAC 5 5.07 4.34

234-X012 1951X430 2 Red 230 VAC 3 5.18 4.43

234-X013 1951X431 2 Green 230 VAC 3 5.06 4.33

234-X014 1951X432 2 Yellow 230 VAC 3 5.07 4.34

M8 with Interior Bezel

IP 40, for a maximum panel thickness of 8 mm (0.315").

234-X015 1905X251 3 Green 12 VDC 20 2.67 2.28

234-X016 1905X252 3 Yellow 12 VDC 20 2.67 2.28

234-X017 1905X253 3 Red 12 VDC 20 2.67 2.28

234-X018 1905X257 3 Blue 12 VDC 20 4.37 3.74

234-X019 1905X351 3 Green 24 VDC 20 2.72 2.33

234-X020 1905X352 3 Yellow 24 VDC 20 2.72 2.33

234-X021 1905X353 3 Red 24 VDC 20 2.72 2.33

234-X022 1905X357 3 Blue 24 VDC 20 4.45 3.82

234-X023 1950X330 4 Red 130 VAC 5 5.29 4.53

234-X024 1950X331 4 Green 130 VAC 5 5.17 4.43

234-X025 1950X332 4 Yellow 130 VAC 5 5.17 4.43

234-X026 1950X430 4 Red 230 VAC 3 5.29 4.53

234-X027 1950X431 4 Green 230 VAC 3 5.17 4.43

234-X028 1950X432 4 Yellow 230 VAC 3 5.17 4.43

Sunlight Visible M8 with Exterior Bezel

IP 67, for a maximum panel thickness of 5.5 mm (0.217"). The

specified versions are built with a protection diode in series with the

resistor and the LED. Therefore it is also possible to run them at an

equivalent alternating voltage.

234-X029 1908X250 1 Red 12 VDC 17 3.57 3.06

234-X030 1908X252 1 Yellow 12 VDC 17 5.05 4.45

234-X031 1908X255 1 Green 12 VDC 17 8.47 7.26

234-X032 1908X257 1 Blue 12 VDC 17 8.47 8.47

234-X035 1908X25W 1 White 12 VDC 17 8.47 7.26

234-X036 1908X350 1 Red 24 VDC 17 3.57 3.06

234-X037 1908X352 1 Yellow 24 VDC 17 4.93 4.23

234-X038 1908X355 1 Green 24 VDC 17 8.47 7.26

234-X039 1908X357 1 Blue 24 VDC 17 8.47 7.26

234-X040 1908X35W 1 White 24 VDC 17 8.47 7.26

*To specify bezel color, insert 0 for satin chrome, 1 for black chrome or 2 for

brushed satin chrome where X appears in Stock No. and Mfr.Õs Type. Other

voltages upon request. In general we deliver the 130/230 VAC versions with a

protection tube.

M8 LED Indicators (continued)

Sunlight Visible M8 with Interior Bezel

IP 67, for a maximum panel thickness of 8 mm (0.315"). The

specified versions are built with a protection diode in series with the

resistor and the LED. Therefore it is also possible to run them at an

equivalent alternating voltage.

234-X041 1909X250 3 Red 12 VDC 17 3.57 3.06

234-X042 1909X252 3 Yellow 12 VDC 17 4.50 3.89

234-X043 1909X255 3 Green 12 VDC 17 8.47 7.26

234-X044 1909X257 3 Blue 12 VDC 17 8.47 7.26

234-X045 1909X25W 3 White 12 VDC 17 8.47 7.26

234-X046 1909X350 3 Red 24 VDC 17 3.57 3.06

234-X047 1909X352 3 Yellow 24 VDC 17 4.93 4.23

234-X048 1909X355 3 Green 24 VDC 17 8.47 7.26

234-X049 1909X357 3 Blue 24 VDC 17 8.47 7.26

234-X050 1909X35W 3 White 24 VDC 17 8.47 7.26

M8 with Superflat Bezel

IP 40, for a maximum panel thickness of 10 mm (0.394").

234-X051 1901X251 5 Green 12 VDC 20 2.99 2.56

234-X052 1901X252 5 Yellow 12 VDC 20 2.99 2.56

234-X053 1901X253 5 Red 12 VDC 20 2.99 2.56

234-X054 1901X351 5 Green 24 VDC 20 2.99 2.56

234-X055 1901X352 5 Yellow 24 VDC 20 2.99 2.56

234-X056 1901X353 5 Red 24 VDC 20 2.99 2.56

M14 LED Indicators

For 14/14.2 mm (0.55"/0.56") mounting hole. High brightness

colored diffused T-3

LEDs are fitted in high quality satin chrome,

black chrome or brushed satin chrome metal bezels, fitted with

fixing nut and washer. Connection is by faston/solder tab terminals

2.8 ´0.8 mm (0.110" ´0.031"). Brass terminal = anode; brass

tinned terminal = cathode.

M14 with Standard Bezel

IP 40, for a maximum panel thickness of 11 mm (0.433").

234-X057 1921X250 6 Red 12 VDC 20 4.68 4.01

234-X058 1921X251 6 Green 12 VDC 20 4.68 4.01

234-X059 1921X252 6 Yellow 12 VDC 20 4.68 4.01

234-X060 1921X350 6 Red 24 VDC 20 4.68 4.01

234-X061 1921X351 6 Green 24 VDC 20 4.68 4.01

234-X062 1921X352 6 Yellow 24 VDC 20 4.68 4.38

234-X063 1935X130 6 Red 130 VAC 6 7.15 6.69

234-X064 1935X131 6 Green 130 VAC 6 8.16 7.65

234-X065 1935X133 6 Yellow 130 VAC 6 8.16 7.65

234-X066 1935X230 6 Red 230 VAC 3 7.14 6.69

234-X067 1935X231 6 Green 230 VAC 3 8.16 7.65

234-X068 1935X233 6 Yellow 230 VAC 3 8.16 7.65

Sunlight Visible M14 with Standard Bezel

IP 67, for a maximum panel thickness of 11 mm (0.433"). The

specified versions are built with a protection diode in series with the

resistor and the LED. Therefore it is also possible to run them at an

equivalent alternating voltage.

234-X069 192AX250 6 Red 12 VDC 17 5.10 4.78

234-X070 192AX252 6 Yellow 12 VDC 17 7.14 6.69

234-X071 192AX255 6 Green 12 VDC 17 10.27 9.63

234-X072 192AX257 6 Blue 12 VDC 17 10.27 9.63

234-X073 192AX25W 6 White 12 VDC 17 10.27 9.63

234-X074 192AX350 6 Red 24 VDC 17 7.14 6.69

234-X075 192AX352 6 Yellow 24 VDC 17 7.14 6.69

234-X076 192AX355 6 Green 24 VDC 17 10.27 9.63

234-X077 192AX357 6 Blue 24 VDC 17 10.27 9.63

234-X078 192AX35W 6 White 24 VDC 17 10.27 9.63

*To specify bezel color, insert 0 for satin chrome, 1 for black chrome or 2 for

brushed satin chrome where X appears in Stock No. and Mfr.Õs Type. Other

voltages upon request. In general we deliver the 130/230 VAC versions with a

protection tube.

M16 LED Indicators

For 16/16.4 mm (0.630"/0.645") mounting hole. High brightness

colored diffused T-3

LEDs are fitted in high quality satin chrome,

black chrome or brushed satin chrome metal bezels, fitted with

fixing nut and washer. Connection is by faston/solder tab terminals

2.8 ´0.8 mm (0.110" ´0.031"). Brass terminal = anode; brass

tinned terminal = cathode.

M16 with Standard Bezel

IP 67, LED flat, for a maximum panel thickness of 11 mm (0.433").

The low voltage versions are built with a protection diode in series

with the resistor and the LED. Therefore it is also possible to run

them at an equivalent alternating voltage.

234-X079 1938X250M 7 Red 12 VDC 16 9.33 8.75

234-X080 1938X252M 7 Yellow 12 VDC 16 9.33 9.03

234-X081 1938X255M 7 Green 12 VDC 11 12.31 11.54

234-X082 1938X257M 7 Blue 12 VDC 14 12.31 11.54

234-X083 1938X25WM 7 White 12 VDC 14 12.31 11.54

234-X084 1938X350M 7 Red 24 VDC 16 9.33 8.75

234-X085 1938X352M 7 Yellow 24 VDC 16 9.35 8.75

234-X086 1938X355M 7 Green 24 VDC 14 12.31 10.86

234-X087 1938X357M 7 Blue 24 VDC 14 12.31 11.54

234-X088 1938X35WM 7 White 24 VDC 14 12.31 11.54

234-X089 1941X130M 7 Red 130 VAC 6 10.57 9.91

234-X090 1941X132M 7 Yellow 130 VAC 6 10.57 9.91

234-X091 1941X135M 7 Green 130 VAC 6 12.94 12.52

234-X092 1941X137M 7 Blue 130 VAC 6 12.94 12.52

234-X093 1941X13WM 7 White 130 VAC 6 12.94 12.52

234-X094 1941X230M 7 Red 230 VAC 3 10.57 10.23

234-X095 1941X232M 7 Yellow 230 VAC 3 10.57 10.23

234-X096 1941X235M 7 Green 230 VAC 3 12.94 12.52

234-X097 1941X237M 7 Blue 230 VAC 3 12.94 12.52

234-X098 1941X23WM 7 White 230 VAC 3 12.94 12.52

M19 LED Indicators

For 19/19.4 mm (0.75"/0.764") mounting hole. High brightness

colored diffused T-3

LEDs are fitted in high quality satin

chrome,black chrome or brushed satin chrome metal bezels, fitted

with fixing nut and washer. Connection is by faston/solder tab

terminals 2.8 ´0.8 mm (0.110" ´0.031"). Brass terminal = anode;

brass tinned terminal = cathode.

M19 with Standard Bezel

IP 67, LED flat, for a maximum panel thickness of 11 mm (0.433").

The low voltage versions are built with a protection diode in series

with the resistor and the LED. Therefore it is also possible to run

them at an equivalent alternating voltage.

234-X099 1971X250 8 Red 12 VDC 16 9.49 9.03

234-X100 1971X252 8 Yellow 12 VDC 16 9.49 8.89

234-X101 1971X255 8 Green 12 VDC 14 12.46 11.68

234-X102 1971X257 8 Blue 12 VDC 14 12.46 11.68

234-X103 1971X25W 8 White 12 VDC 14 12.31 11.54

234-X104 1971X350 8 Red 24 VDC 16 9.33 9.03

234-X105 1971X352 8 Yellow 24 VDC 16 9.33 9.03

234-X106 1971X355 8 Green 24 VDC 14 12.31 11.91

234-X107 1971X357 8 Blue 24 VDC 14 12.31 11.91

234-X108 1971X35W 8 White 24 VDC 14 12.31 11.91

234-X109 1974X130 8 Red 130 VAC 6 10.57 10.23

234-X110 1974X132 8 Yellow 130 VAC 6 10.57 10.23

234-X111 1974X135 8 Green 130 VAC 6 12.94 12.13

234-X112 1974X137 8 Blue 130 VAC 6 12.94 12.13

234-X113 1974X13W 8 White 130 VAC 6 12.94 12.52

234-X114 1974X230 8 Red 230 VAC 3 10.57 10.23

234-X115 1974X232 8 Yellow 230 VAC 3 10.57 10.23

234-X116 1974X235 8 Green 230 VAC 3 12.94 12.52

234-X117 1974X237 8 Blue 230 VAC 3 12.94 12.13

234-X118 1974X23W 8 White 230 VAC 3 12.94 12.13

*To specify bezel color, insert 0 for satin chrome, 1 for black chrome or 2 for

brushed satin chrome where X appears in Stock No. and Mfr.Õs Type. Other

voltages upon request. In general we deliver the 130/230 VAC versions with a

protection tube.

Non-Relampable Panel Mount LED Indicators

Stock Mfr.Õs Amps

Fig. Color Volts

No.* Type* (mA)

EACH

1-99 100-Up

Stock Mfr.Õs Amps

Fig. Color Volts

No.* Type* (mA)

EACH

1-99 100-Up

Stock Mfr.Õs Amps

Fig. Color Volts

No.* Type* (mA)

EACH

1-99 100-Up

EBT Optronic