Power PCB Relay G5PA G5PA Relay Is Ideal for TV and Audio Equipment Power Supplies * Meets TV-5 standards required for TV and audio equipment power supplies. * High sensitivity coil with low 250 mW power consumption. * High impulse withstand surge of 10,000V. * Double insulation construction assures high insulation capability. * UL, CSA, SEMKO, and TUV approved. Ordering Information Type Contact form Standard SPST-NO Model (semi-sealed) G5PA-1-8 How to Order G5PA-1-8-DC__ add coil rating Specifications Contact Data Type Standard Load Resistive (p.f. = 1) Capacitive (TV) Load Rated load 5A at 250 VAC; 5A at 30 VDC 100 A inrush (0.3-0.35 ms)/3 A steady state at 125 VAC Contact material AgSnO Carry current 5A Max. operating voltage 250 VAC, 30 VDC Max. operating current 5A Max. switching capacity 1,250 VA, 150 W Min. permissible load 100mA, 5 VDC 260 Power PCB Relay G5PA Coil Data - Standard Rated voltage (VDC) Rated current (mA) Coil resistance () Pickup voltage Dropout voltage Maximum voltage ( - - - - - - - - - - % of rated voltage - - - - - - - - - - - - - ) Power consumption (approx.) 5 50.8 100 80% max. 10% min. 110% max. 250mW 9 27.8 324 80% max. 10% min. 110% max. 250mW 12 20.8 577 80% max. 10% min. 110% max. 250mW 24 10.4 2,310 80% max. 10% min. 110% max. 250mW Characteristics Contact resistance 100 m max. Operate time 15 ms max. Release time 5 ms max. Insulation resistance 1,000 M min. (at 500 VDC) Dielectric withstand voltage 4,000 VAC, 50/60 Hz for 1 minute between coil and contact 1,000 VAC, 50/60 Hz for 1 minute between contacts of same polarity Impulse withstand voltage 10,000 V, 1.2x50s between coil and contact Vibration resistance Destruction 10 to 55 Hz, 1.5-mm double amplitude for 2 hours Malfunction 10 to 55 Hz, 1.5-mm double amplitude for 5 minutes Destruction 1,000 m/s2 (approx. 100G) Malfunction 200 m/s2 (approx. 20G) Mechanical 1,000,000 operations min. (at 18,000 operations/hr) Electrical 80,000 operations min. with resistive load (reference value) 40,000 operations min. (under rated TV-Capacitive Load) Ambient temperature Operating -40C to 70C (with no icing) Ambient humidity Operating 35% to 85% Weight Approx. 10g Shock resistance Life expectancy Characteristic Data DC resistive load AC resistive load Ambient temperature vs. max. voltage Max. voltage (%) Switching current (A) Max switching capacity 3 Switching voltage (V) Ambient temperature (C) Note: The maximum voltage is the permissable peak voltage that can be imposed on the coil. The maximum voltage must not be imposed on the coil continuously. Power PCB Relay G5PA 261 Dimensions Unit: mm (inch) SPST-NO Type G5PA-1 Mounting Holes (Bottom view) Tolerance: 0.1 mm 10 (0.394) Max. [9.85 (0.388)]* 24 (0.945) Max. [23.85 (0.939)]* Two holes 1.0 (0.039) dia. Two holes 1.3 (0.051) dia. 1 25 (0.984) Max. [24.8 (0.976)]* 0.50 (0.020) 4 4 (0.157) 20 (0.787) 1 1 (0.039) (0.039) 0.4 0.4 (0.015) (0.015) *Average Approved Standards UL (File No. E41515, UL508) CSA (File No. LR31928, C22.2 No. 14) Model G5PA-1 Coil ratings 5 to 24 VDC Contact ratings 5 A, 277 VAC No. of test operations 30,000 5 A, 30 VDC 6,000 TV-5 rating 25,000 SEMKO (Certificate No. 9732043; EN60065) Model G5PA-1 Coil ratings 5 to 28 VDC Contact ratings 5 A/40 A, 250 VAC 3 A/100A, 250 VAC No. of test operations 10,000 TUV (Certificate No. R9650435, IEC255/VDE0435) Model G5PA-1 262 Coil ratings 5 to 24 VDC 2 2 7.5 (0.295) 16.5 (0.650) 0.8 (0.03) Terminal Arrangement/ Internal Connections (Bottom view) Contact ratings 5 A, 250 VAC (coso=1) 5 A, 30 VDC (L/R : 0 ms) Power PCB Relay G5PA No. of test operations 100,000 3 Power PCB Relay G5PA 263 Certain Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all catalogs, manuals or other documents, whether electronic or in writing, relating to the sale of goods or services (collectively, the "Goods") by Omron Electronic Components LLC and its subsidiary companies ("Seller"). Seller hereby objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. Please contact your Omron representative to confirm any additional terms for sales from your Omron company. 2. Prices. All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at time of shipment. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Seller's payment terms and (ii) Buyer has no past due amounts owing to Seller. 4. Orders. Seller will accept no order less than $200 net billing. 5. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Goods. 6. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Goods sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 7. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Goods sold hereunder and stop any Goods in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 9. Force Majeure. Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller: a. Shipments shall be by a carrier selected by Seller; b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Goods shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Goods shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Goods until the full purchase price is paid by Buyer; d. Delivery and shipping dates are estimates only. e. Seller will package Goods as it deems proper for protection against normal handling and extra charges apply to special conditions. 11. Claims. Any claim by Buyer against Seller for shortage or damage to the Goods occurring before delivery to the carrier must be presented in writing to Seller within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Goods from Seller in the condition claimed. 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the Goods will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). Seller disclaims all other warranties, express or implied. (b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE GOODS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE GOODS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Seller further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Goods or otherwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the noncomplying Good or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Good; provided that in no event shall Seller be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Goods unless Seller's analysis confirms that the Goods were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any goods by Buyer must be approved in writing by Seller before shipment. Seller shall not be liable for the suitability or unsuitability or the results from the use of Goods in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. 13. Damage Limits; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE GOODS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Seller exceed the individual price of the Good on which liability is asserted. 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Goods. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Good made to Buyer specifications infringed intellectual property rights of another party. 15. Property; Confidentiality. The intellectual property embodied in the Goods is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Goods are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder without Seller's written consent. (c) Amendment. These Terms constitute the entire agreement between Buyer and Seller relating to the Goods, and no provision may be changed or waived unless in writing signed by the parties. (d) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (e) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (f) As used herein, "including" means "including without limitation". Certain Precautions on Specifications and Use 1. Suitability of Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Good in the Buyer's application or use of the Good. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Good. This information by itself is not sufficient for a complete determination of the suitability of the Good in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of this Good, nor is it intended to imply that the uses listed may be suitable for this Good: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Good. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE SELLER'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's pro gramming of a programmable Good, or any consequence thereof. 3. Performance Data. Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty It may represent the result of Seller's test conditions, and the user must corre late it to actual application requirements. Actual performance is subject to the Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our prac tice to change part numbers when published ratings or features are changed or when significant construction changes are made. However, some specifica tions of the Good may be changed without any notice. When in doubt, specia part numbers may be assigned to fix or establish key specifications for you application. Please consult with your Seller's representative at any time to con firm actual specifications of purchased Good. 5. Errors and Omissions. The information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. Complete "Terms and Conditions of Sale" for product purchase and use are on Omron's website at www.omron.com/oei - under the "About Us" tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. GC RLY8A 8/04 OMRON CANADA, INC. OMRON ON-LINE 885 Milner Avenue Toronto, Ontario M1B 5V8 Global - http://www.omron.com USA - http://www.omron.com/oei Canada - http://www.omron.ca 416-286-6465 Specifications subject to change without notice Printed in USA