HVGC-100 100W Single Output LED Power Supply series Features : Constant current design Wide input range 180~528VAC Built-in active PFC function High efficiency up to 91% Protections: Short circuit / Over voltage / Over temperature Cooling by free air convection OCP point adjustable through output cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Three in one dimming function (0~10Vdc or 10V PWM signal or resistance) Suitable for LED lighting and street lighting applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations 5 years warranty (Note.7) 110 F HVGC-100-350 A M M IP65 IP67 A : IP65 rated. Constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 0~10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION HVGC-100-350 HVGC-100-700 RATED CURRENT 350mA 700mA CURRENT ACCURACY 5.0% MODEL OUTPUT OUTPUT VOLTAGE RANGE Note.4 29 ~ 285V 15 ~ 142V RATED POWER 99.4W 99.75W RIPPLE & NOISE (max.) Note.2 1Vp-p CURRENT ADJ. RANGE 210 ~ 350mA SETUP, RISE TIME 500ms, 80ms HOLD UP TIME (Typ.) 30ms at full load VOLTAGE RANGE 0.5Vp-p Can be adjusted by internal potentiometer A type only 420 ~ 700mA 230VAC / 347VAC / 480VAC at full load ; B type 500ms, 280ms Note.3 180 ~ 528VAC FREQUENCY RANGE 230VAC / 347VAC / 480VAC at 95% load 480VAC / 347VAC 254VDC ~ 747VDC 47 ~ 63Hz PF0.98/230VAC, PF0.98/277VAC, PF0.97/347VAC, PF0.93/480VAC at full load (Please refer to "Power Factor Characteristic" curve) POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION THD<20% when output loading50% at 230VAC/277VAC/347VAC input ; THD<20% when output loading75% at 480VAC input INPUT EFFICIENCY (Typ.) 91% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.38A / 347VAC 91% 0.28A / 480VAC COLD START 25A(twidth=900s measured at 50% Ipeak) at 480VAC MAX. No. of PSUs on 16A CIRCUIT BREAKER 5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 480VAC LEAKAGE CURRENT <0.75mA / 480VAC SHORT CIRCUIT PROTECTION OVER VOLTAGE Constant current limiting, recovers automatically after fault condition is removed 300 ~ 320V 150 ~ 160V Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -40 ~ +70 (Refer to "Derating Curve") WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.5 UL8750, CSA C22.2 No. 250.0-08, TUV EN61347-1, EN61347-2-13, IP65 or IP67 approved ; design refer to UL60950-1, TUV EN60950-1 SAFETY & EMC OTHERS WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (50% load) ; EN61000-3-3, FCC part 15 class B EMC IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV), criteria A 186.1K hrs min. MIL-HDBK-217F (25) DIMENSION 236*68*38.8mm (L*W*H) 1.18Kg; 12pcs/15.2Kg/0.74CUFT PACKING NOTE I/P-FG:2KVAC O/P-FG:1.5KVAC 1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 2.2uf parallel capacitor. 3. Derating may be needed under low input voltages. Please check the static characteristics for more details. 4. Please refer to "DRIVING METHODS OF LED MODULE" and "DIMMING OPERATION". 5. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1. 6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 7. Refer to warranty statement. 8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. File Name:HVGC-100-SPEC 2015- 05-26 HVGC-100 100W Single Output LED Power Supply Mechanical Specification Case No.994 series Unit:mm A Type:(HVGC-100-_A) 236 212 12 9.4 9.6 34.2 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) Io ADJ. T case 68 30020 STW 18AWGx3C SJTW 18AWGx2C 34 9.4 30020 104.4 -V(Black) +V(Red) 4.2x4PL 38.8 T case: Max. Case Temperature. IP65 rated. Constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) B Type:(HVGC-100-_B) 236 212 12 9.6 9.4 30020 34.2 68 T case UL2517 18AWGx2C 104.4 SJTW 18AWGx2C 34 STW 18AWGx3C 9.4 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 30020 4.2x4PL DIM+(Blue) DIM-(White) -V(Black) +V(Red) 38.8 T case: Max. Case Temperature. D Type(option):(HVGC-100-_D) 236 212 12 T case 68 30020 34 STW 18AWGx3C 9.4 30020 104.4 SJTW 18AWGx2C -V(Black) +V(Red) 4.2x4PL T case: Max. Case Temperature. 38.8 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 34.2 9.4 9.6 IP67 rated. Timer dimming function, contact MEAN WELL for details. File Name:HVGC-100-SPEC 2015- 05-26 HVGC-100 100W Single Output LED Power Supply series Block Diagram fosc : 80KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V DIM+ DIM(B Type) O.L.P. FG O.L.P. DETECTION CIRCUIT PWM & PFC CONTROL PFC CONTROL O.V.P. O.T.P. Derating Curve Static Characteristics 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -40 -25 -10 0 15 30 50 60 70 (HORIZONTAL) 60 50 40 180 AMBIENT TEMPERATURE () 347 480 528 INPUT VOLTAGE (V) 60Hz Power Factor Characteristic Constant Current Mode 1 .0 0 0 .9 8 0 .9 6 PF 0 .9 4 0 .9 2 480V 0 .9 0 347V 0 .8 8 277V 0 .8 6 230V 0 .8 4 0 .8 2 0 .8 0 50% 60% 70% 80% 90% 100% (100W) LOAD File Name:HVGC-100-SPEC 2015- 05-26 HVGC-100 100W Single Output LED Power Supply series EFFICIENCY vs LOAD (HVGC-100-700 Model) HVGC-100 series possess superior working efficiency that up to 91% can be reached in field applications. 0.94 EFFICIENCY (%) 0.90 0.86 0.82 480V 0.78 347V 0.74 277V 0.70 230V 0.66 0.62 0.58 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE A typical LED power supply may work in "constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CC characteristic can be operated at CC mode (direct drive). In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. 100 Vo(%) Should there be any compatibility issues, please contact MEAN WELL. Constant Current region 50 100 Io (%) Typical LED power supply I-V curve File Name:HVGC-100-SPEC 2015- 05-26 HVGC-100 100W Single Output LED Power Supply series DIMMING OPERATION (for B-type only) FG (Green/Yellow) AC/L(Brown) AC/N(Blue) DIM+(Blue) DIM-(White) HVGC-100 -V(Black) +V(Red) Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or 0 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-. Please DO NOT connect "DIM-" to "-V". Reference resistance value for output current adjustment (Typical) Output voltage limit of 50%. Single driver Short Resistance Multiple drivers value (N=driver quantity for synchronized Short 10K 60K 70K 80K 90K 100K OPEN 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N dimming operation) Percentage of rated current 20K 30K 40K 50K 10% 0% 20% 30% ----- 40% 50% 60% 70% 80% 90% 100% 95%~108% 0 ~ 10V dimming function for output current adjustment (Typical) Dimming value 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% 10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz Duty value 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN Percentage of rated current 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% Dimming Characteristic 100% when DIM+/DIM- are open circuit. 100% Output Current Percentage of rated current(%) 90% 80% 70% Non-Linear 60% 50% 40% 30% 20% 10% Note 0% 0~10V 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of 10V PWM (frequency range = 100~3KHz) Short 10K 20K 30K 40K 50K 60K 70K 80K 90K 100K Short~100Kresistance Dimming input Note : The output current drops down to 0% when the dimming input is about 6Kor 0.6Vdc, or 10V PWM signal with 6% duty cycle. WATERPROOF CONNECTION Waterproof connector Waterproof connector can be assembled on the output cable of HVGC-100 to operate in dry/wet/damp or outdoor environment. AC source Size M12 Order No. Suitable Current HVGC-100 I/P O/P Pin Configuration (Female) 4-PIN 5A/PIN M12-04 10A max. 5-PIN 5A/PIN M12-05 10A max. Size M15 Order No. Suitable Current Pin Configuration (Female) 2-PIN 12A/PIN M15-02 12A max. LED Lamp File Name:HVGC-100-SPEC 2015- 05-26 100W Single Output LED Power Supply HVGC-100 series Cable Joiner CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG 20 25 66 26 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HVGC-100 O/P Wires CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. Junction Box(Option ) 208.8 10 76 370.8 8.5 STW 18AWGx3C -V(Black) +V(Red) 32 68 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 61 8.5 6 5 SJTW 18AWGx2C 2-5 3- PF 1/2" 15020 35 38.8 15020 3- PF 1/2" Optional junction box available for A - type , please contact MEAW WELL for details. 86 File Name:HVGC-100-SPEC 2015- 05-26 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Mean Well: HVGC-100-350A HVGC-100-350B HVGC-100-700A HVGC-100-700B