SQ4153EY www.vishay.com Vishay Siliconix Automotive P-Channel 12 V (D-S) 175 C MOSFET FEATURES PRODUCT SUMMARY VDS (V) * TrenchFET(R) power MOSFET -12 RDS(on) () at VGS = -4.5 V 0.00832 RDS(on) () at VGS = -2.5 V 0.01000 RDS(on) () at VGS = -1.8 V 0.01430 ID (A) * AEC-Q101 qualified * 100 % Rg and UIS tested * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 -25 Configuration Single Package SO-8 S SO-8 Single D 8 D 7 D 6 D 5 G Top View 1 S 2 S 3 S 4 G D P-Channel MOSFET ABSOLUTE MAXIMUM RATINGS (TC = 25 C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-Source Voltage VDS -12 Gate-Source Voltage VGS 8 Continuous Drain Current a TC = 25 C TC = 125 C Continuous Source Current (Diode Conduction) a Pulsed Drain Current b Single Pulse Avalanche Current Single Pulse Avalanche Energy Maximum Power Dissipation b L = 0.1 mH TC = 25 C TC = 125 C Operating Junction and Storage Temperature Range ID -14 -6.5 IDM -100 IAS -19 PD V -25 IS EAS UNIT 18 7.1 2.3 A mJ W TJ, Tstg -55 to +175 C SYMBOL LIMIT UNIT RthJA 85 RthJF 21 THERMAL RESISTANCE RATINGS PARAMETER Junction-to-Ambient Junction-to-Foot (Drain) PCB Mount c C/W Notes a. Package limited. b. Pulse test; pulse width 300 s, duty cycle 2 %. c. When mounted on 1" square PCB (FR4 material). S16-0100, Rev. B, 25-Jan-16 Document Number: 66897 1 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ4153EY www.vishay.com Vishay Siliconix SPECIFICATIONS (TC = 25 C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage VDS VGS = 0, ID = -250 A -12 - - VGS(th) VDS = VGS, ID = -250 A -0.4 -0.6 -0.9 Gate-Source Leakage IGSS VDS = 0 V, VGS = 8 V - - 100 Zero Gate Voltage Drain Current IDSS Gate-Source Threshold Voltage On-State Drain Current a Drain-Source On-State Resistance a Forward Transconductance a ID(on) RDS(on) gfs VGS = 0 V VDS = -12 V - - -1 VGS = 0 V VDS = -12 V, TJ = 125 C - - -50 VGS = 0 V VDS = -12 V, TJ = 175 C - - -150 - - VGS = -4.5 V VDS -5 V -30 VGS = -4.5 V ID = -14 A - nA A A 0.00510 0.00832 VGS = -4.5 V ID = -14 A, TJ = 125 C - - 0.00900 VGS = -4.5 V ID = -14 A, TJ = 175 C - - 0.01100 VGS = -2.5 V ID = -13 A - 0.00650 0.01000 VGS = -1.8 V ID = -12 A - 0.00940 0.01430 VDS = -6 V, ID = -10.5 A V - 54 - - 7500 11 000 - 2800 4200 S Dynamic b Input Capacitance Ciss Output Capacitance Coss VGS = 0 V VDS = -6 V, f = 1 MHz Reverse Transfer Capacitance Crss - 2400 3600 Total Gate Charge c Qg - 101 151 Gate-Source Charge c Qgs - 15 - Gate-Drain Charge c Gate Resistance Rg td(on) c tr Turn-Off Delay Time c td(off) Rise Time Fall Time c VDS = -6 V, ID = -10.5 A Qgd Time c Turn-On Delay VGS = -4.5 V f = 1 MHz VDD = -6 V, RL = 15 ID -10.5 A, VGEN = -4.5 V, Rg = 6 tf - 45 - 1.1 2.2 3.2 - 31 42 pF nC - 168 224 - 310 412 - 283 376 - - -100 A - -0.8 -1.2 V ns Source-Drain Diode Ratings and Characteristics b Pulsed Current a ISM Forward Voltage VSD IF = -10.5 A, VGS = 0 Notes a. Pulse test; pulse width 300 s, duty cycle 2 %. b. Guaranteed by design, not subject to production testing. c. Independent of operating temperature. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S16-0100, Rev. B, 25-Jan-16 Document Number: 66897 2 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ4153EY www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise noted) 50 50 VGS = 5 V thru 2 V 40 ID - Drain Current (A) ID - Drain Current (A) 40 30 20 VGS = 1.5 V 10 30 TC = 25 C 20 10 TC = 125 C TC = - 55 C VGS = 1 V 0 0 3 6 9 12 15 VDS - Drain-to-Source Voltage (V) 0 2 3 4 VGS - Gate-to-Source Voltage (V) Output Characteristics Transfer Characteristics 10 100 8 80 gfs - Transconductance (S) ID - Drain Current (A) 0 6 TC = 25 C 4 2 TC = 125 C 1 5 TC = - 55 C TC = 25 C 60 40 TC = 125 C 20 TC = - 55 C 0 0 0 VGS - Gate-to-Source Voltage (V) 6 9 ID - Drain Current (A) Transfer Characteristics Transconductance 1 1.5 2 2.5 0 3 12 15 12000 0.025 10000 0.020 C - Capacitance (pF) RDS(on) - On-Resistance () 3 0.015 VGS = 1.8 V 0.010 VGS = 2.5 V 0.005 Ciss 8000 6000 4000 Coss 2000 VGS = 4.5 V Crss 0 0.000 0 8 16 24 ID - Drain Current (A) 32 On-Resistance vs. Drain Current S16-0100, Rev. B, 25-Jan-16 40 0 3 6 9 VDS - Drain-to-Source Voltage (V) 12 Capacitance Document Number: 66897 3 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ4153EY www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise noted) 1.5 5 RDS(on) - On-Resistance (Normalized) VGS - Gate-to-Source Voltage (V) ID = 10.5 A VDS = 6 V 4 3 2 1 0 0 30 60 90 ID = 14 A 1.3 1.1 VGS = 4.5 V 0.9 0.7 0.5 - 50 - 25 120 Qg - Total Gate Charge (nC) 0 25 50 75 100 125 150 175 TJ - Junction Temperature (C) Gate Charge On-Resistance vs. Junction Temperature 100 0.05 TJ = 150 C 0.04 RDS(on) - On-Resistance () 10 IS - Source Current (A) VGS = 2.5 V 1 TJ = 25 C 0.1 0.01 0.03 0.02 TJ = 150 C 0.01 TJ = 25 C 0.001 0.00 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 1 2 3 4 VGS - Gate-to-Source Voltage (V) VSD - Source-to-Drain Voltage (V) Source Drain Diode Forward Voltage 5 On-Resistance vs. Gate-to-Source Voltage - 15 1.0 VDS - Drain-to-Source Voltage (V) ID = 1 mA VGS(th) Variance (V) 0.7 ID = 600 A 0.4 ID = 2 mA 0.1 - 0.2 - 0.5 - 50 - 25 0 25 50 75 100 TJ - Temperature (C) Threshold Voltage S16-0100, Rev. B, 25-Jan-16 125 150 175 - 16 - 17 - 18 - 19 - 20 - 50 - 25 0 25 50 75 100 125 150 175 TJ - Junction Temperature (C) Breakdown Voltage vs. Junction Temperature Document Number: 66897 4 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ4153EY www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 C, unless otherwise noted) 1000 IDM Limited ID - Drain Current (A) 100 1 ms 10 1 10 ms Limited by RDS(on)* 100 ms 1 s, 10 s, DC 0.1 0.01 0.01 TC = 25 C Single Pulse BVDSS Limited 0.1 1 10 100 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 Notes: 0.1 PDM 0.05 t1 t2 1. Duty Cycle, D = t1 t2 2. Per Unit Base = R thJA = 84 C/W 0.02 3. T JM - TA = PDMZthJA(t) Single Pulse 0.01 10 -4 10 -3 4. Surface Mounted 10 -2 10 -1 1 Square Wave Pulse Duration (s) 10 100 1000 Normalized Thermal Transient Impedance, Junction-to-Ambient S16-0100, Rev. B, 25-Jan-16 Document Number: 66897 5 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ4153EY www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 C, unless otherwise noted) 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10 -4 10 -3 10 -2 10 -1 Square Wave Pulse Duration (s) 1 10 Normalized Thermal Transient Impedance, Junction-to-Foot Note * The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction-to-Ambient (25 C) - Normalized Transient Thermal Impedance Junction-to-Foot (25 C) are given for general guidelines only to enable the user to get a "ball park" indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities can widely vary depending on actual application parameters and operating conditions. Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?66897. S16-0100, Rev. B, 25-Jan-16 Document Number: 66897 6 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ4153EY www.vishay.com REVISION HISTORY REVISION B a DATE 15-Jan-16 Vishay Siliconix DESCRIPTION OF CHANGE * Maximum on-resistance changed * IGSS test condition changed Note a. As of April 2014 S16-0100, Rev. B, 25-Jan-16 Document Number: 66897 7 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information Vishay Siliconix SOIC (NARROW): 8-LEAD JEDEC Part Number: MS-012 8 6 7 5 E 1 3 2 H 4 S h x 45 D C 0.25 mm (Gage Plane) A e B All Leads q A1 L 0.004" MILLIMETERS INCHES DIM Min Max Min Max A 1.35 1.75 0.053 0.069 A1 0.10 0.20 0.004 0.008 B 0.35 0.51 0.014 0.020 C 0.19 0.25 0.0075 0.010 D 4.80 5.00 0.189 0.196 E 3.80 4.00 0.150 e 0.101 mm 1.27 BSC 0.157 0.050 BSC H 5.80 6.20 0.228 0.244 h 0.25 0.50 0.010 0.020 L 0.50 0.93 0.020 0.037 q 0 8 0 8 S 0.44 0.64 0.018 0.026 ECN: C-06527-Rev. I, 11-Sep-06 DWG: 5498 Document Number: 71192 11-Sep-06 www.vishay.com 1 Application Note 826 Vishay Siliconix RECOMMENDED MINIMUM PADS FOR SO-8 0.172 (4.369) 0.028 0.022 0.050 (0.559) (1.270) 0.152 (3.861) 0.047 (1.194) 0.246 (6.248) (0.711) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index APPLICATION NOTE Return to Index www.vishay.com 22 Document Number: 72606 Revision: 21-Jan-08 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000