July 2013
Chip Beads
For power line
MPZ series
MPZ0603 0603[0201 inch]*
MPZ1005 1005[0402 inch]
MPZ1608 1608[0603 inch]
MPZ2012 2012[0805 inch]
* Dimensions Code JIS[EIA]
EMC Components
(2/23)
001-01 / 20130723 / e9413_mpz.fm
EMC Components
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
REMINDERS
(3/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
Chip Beads
For power line
FEATURES
Noise reduction solution for power supply lines.
Compared to the conventional MMZ Series, has low direct current resistance for compatibility with large currents, optimal for low power
consumption.
Lineup includes 4 sizes from 0603 to 2012.
Achieves various frequency characteristics by using 5 materials with different features.
Multilayer integration monolithic structure makes it highly reliable.
There is no directivity.
APPLICATION
Smart phones, tablets, portable memory audio devices, various modules, PCs, note PCs, TVs, STBs, Blu-ray recorders, DSCs, and
DVCs
Power supply line noise removal for game machines, smart grids, industrial equipment, etc.
PART NUMBER CONSTRUCTION
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Operating temperature range includes self-temperature rise.
The Storage temperature range is for after the circuit board is mounted.
Overview of the MPZ Series
MPZ 0603 S 220 C T □□□
Series name L×W×T Dimensions Material name Impedance Characteristic
type Packaging style Internal code
(mm) (:) at 100MHz
0603 0.6×0.3x0.3 S 220 22 C T Taping
1005 1.0×0.5x0.5 Y A
1608 1.6×0.8x0.6 B B
1.6×0.8x0.8 R
2012 2.0×1.25x0.85 D
Type
Temperature range
Package quantity Individual weight
Operating
temperature
Storage
temperature
（°C） （°C） （pieces/reel） （mg）
MPZ0603 –55 to +125 –55 to +125 15,000 0.3
MPZ1005 –40 to +85 –40 to +85 10,000 1
MPZ1608 t=0.6mm –55 to +125 –55 to +125 4,000 3
t=0.8mm –55 to +125 –55 to +125 4,000 4
MPZ2012 –55 to +125 –55 to +125 4,000 8
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
(4/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
Overview of the MPZ Series
RECOMMENDED REFLOW PROFILE
Preheating Soldering Peak
Temp. Time Temp. Time Temp. Time
T1 T2 t1 T3 t2 T4 t3
150°C 180°C 60 to 120s 230°C 30 to 60s 250 to 260°C 10s
Natural
cooling
t3
t1
Preheating
t2
Soldering
T3 T3
T4
T2
T1
t: Time
Peak
T: Temperature
(5/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
Overview of the MPZ Series
MATERIAL CHARACTERISTICS
B material: This type is perfectly suited for fast digital signals. By equalizing R components and X components that beads possess at a
frequency of 5MHz, it is able to suppress overshooting, undershooting and ringing of fast digital signals.
R material: For wide frequency applications calling for broad impedance characteristics.
For digital signal line applications calling requiring good waveform integrity. Impedance values selected for effectiveness at 10
to 200MHz.
S material: Standard type that features impedance characteristics similar to those of a typical ferrite core.
For signal line applications in which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to
300MHz.
Y material: High frequency range type intended for the 100MHz region and above.
For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for
effectiveness at 80 to 400MHz.
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies.
Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.
TYPICAL MATERIAL IMPEDANCE CHARACTERISTICS 
0
500
1000
1500
2000
2500
10 100 1000
Frequency(MHz)
Impedance(Ω)
RS
D
Y
B
(6/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series
MPZ0603 Type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
0.3±0.03
0.6±0.03
0.1min.
0.3±0.03
Dimensions in mm
Dimensions in mm
0.30 0.250.25
0.30
(7/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series MPZ0603 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
○Measurement equipment
＊ Equivalent measurement equipment may be used.
Impedance
[100MHz] DC resistance
(:)max.
Rated current
(mA)max. Part No.
(:)Tolerance
22 ±25% 0.065 1000 MPZ0603S220CT□□□
33 ±25% 0.090 750 MPZ0603S330CT□□□
47 ±25% 0.120 500 MPZ0603S470CT□□□
Measurement item Product No. Manufacturer
Impedance E4991A+16197 Agilent Technologies
DC resistance Type-7556 Yokogawa
(8/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series MPZ0603 Type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MPZ0603S SERIES
0
10
20
30
40
50
60
70
80
90
100
100001000100101
Frequency (MHz)
Impedance (Ω)
MPZ0603S470C
MPZ0603S330C
MPZ0603S220C
(9/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series MPZ0603 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MPZ0603S220C MPZ0603S330C MPZ0603S470C
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
0
10
20
30
40
50
60
70
Z
X
R
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
0
5
10
15
20
25
30
35
40
45
Z
X
R
(10/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series
MPZ1005 Type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
0.5±0.05
1±0.05
0.1min.
0.5±0.05
Dimensions in mm
Dimensions in mm
0.40.5 0.5
0.5
(11/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series MPZ1005 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
○Measurement equipment
＊ Equivalent measurement equipment may be used.
Impedance
[100MHz] DC resistance
(:)max.
Rated current
(A)max. Part No.
(:)Tolerance
10 ±5:0.025 2.0 MPZ1005S100CT□□□
30 ±10:0.035 1.7 MPZ1005S300CT□□□
60 ±25% 0.060 1.5 MPZ1005S600CT□□□
120 ±25% 0.090 1.2 MPZ1005S121CT□□□
90 ±25% 0.100 1.2 MPZ1005Y900CT□□□
Measurement item Product No. Manufacturer
Impedance E4991A+16192A Agilent Technologies
DC resistance Type-7556 Yokogawa
(12/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series MPZ1005 Type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MPZ1005S SERIES MPZ1005Y SERIES
0100001000100101
Frequency (MHz)
Impedance (Ω)
MPZ1005S600C
MPZ1005S121C
MPZ1005S100C
MPZ1005S300C
50
100
150
200
250
0100001000100101
Frequency (MHz)
Impedance (Ω)
MPZ1005Y900C
50
100
150
200
250
(13/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series MPZ1005 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MPZ1005S100C MPZ1005S300C MPZ1005S600C
MPZ1005S121C MPZ1005Y900C
0100001000100101
Frequency (MHz)
Impedance (Ω)
Z
R
X
10
20
30
40
50
0100001000100101
Frequency (MHz)
Impedance (Ω)
Z
R
X
2
4
6
8
10
12
14
16
18
0
100
80
60
40
20
100001000100101
Z
R
X
Frequency (MHz)
Impedance (Ω)
0100001000100101
Frequency (MHz)
Impedance (Ω)
Z
R
X
50
100
150
200
0
250
200
100
150
50
100001000100101
Frequency (MHz)
Impedance (Ω)
Z
R
X
(14/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series
MPZ1608 Type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
Thickness(T)
0.6±0.15mm
0.8±0.15mm
0.8±0.15
1.6±0.15
0.3±0.2
T
Dimensions in mm
Dimensions in mm
0.80.6 0.6
0.8
(15/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series MPZ1608 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Please refer to the graph of RATED CURRENT vs. TEMPERATURE CHARACTERISTICS (derating) about the rating current at 85°C or more in
temperature of the product.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
○Rated current vs. temperature characteristics (derating)
Impedance
[100MHz] DC resistance
(:)max.
Rated current
(A)max.
Thickness T
(mm) Part No.
(:)Tolerance
470 ±25% 0.150 1.0 0.8 MPZ1608B471AT□□□
26 ±25% 0.007 6.0 0.6 MPZ1608S260AT□□□
30 ±10:0.010 5.0 0.6 MPZ1608S300AT□□□
60 ±25% 0.020 3.5 0.6 MPZ1608S600AT□□□
100 ±25% 0.030 3.0 0.6 MPZ1608S101AT□□□
120 ±25% 0.045 2.0 0.6 MPZ1608S121AT□□□
180 ±25% 0.050 2.0 0.6 MPZ1608S181AT□□□
220 ±25% 0.050 2.2 0.8 MPZ1608S221AT□□□
330 ±25% 0.080 1.7 0.8 MPZ1608S331AT□□□
470 ±25% 0.150 1.0 0.8 MPZ1608S471AT□□□
600 ±25% 0.150 1.0 0.8 MPZ1608S601AT□□□
1000 ±25% 0.300 0.8 0.8 MPZ1608S102AT□□□
390 ±25% 0.120 1.2 0.8 MPZ1608R391AT□□□
60 ±25% 0.030 2.3 0.8 MPZ1608Y600BT□□□
100 ±25% 0.040 2.0 0.8 MPZ1608Y101BT□□□
150 ±25% 0.050 1.8 0.8 MPZ1608Y151BT□□□
220 ±25% 0.100 1.5 0.8 MPZ1608Y221BT□□□
30 ±10:0.060 1.8 0.8 MPZ1608D300BT□□□
60 ±25% 0.100 1.2 0.8 MPZ1608D600BT□□□
100 ±25% 0.150 1.0 0.8 MPZ1608D101BT□□□
Measurement item Product No. Manufacturer
Impedance E4991A+16192A Agilent Technologies
DC resistance Type-7556 Yokogawa
0
1
2
3
4
5
7
6
–55 –35 –15 5 25 45 65 85 105 125
Temperature (°C)
Rated current (A)
S600A S101AS300AS260A
S102A
B471A,S471A,S601A,D101BR391A,D600B
Y221BS331A
Y151B,D300B
Y600B S221A S121A,S181A,Y101B
(16/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series MPZ1608 Type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MPZ1608B SERIES MPZ1608S SERIES MPZ1608R SERIES
MPZ1608Y SERIES MPZ1608D SERIES
100001000100101
Frequency (MHz)
Impedance (Ω)
0
100
200
300
400
500 MPZ1608B471A
0
1000
1200
800
900
700
600
500
400
300
200
100
100001000100101
Frequency (MHz)
Impedance (Ω)
MPZ1608S102A
MPZ1608S300A
MPZ1608S600A
MPZ1608S260A
MPZ1608S101A
MPZ1608S121A
MPZ1608S181A
MPZ1608S221A
MPZ1608S331A
MPZ1608S471A
MPZ1608S601A
400
300
200
100
0
500
100001000100101
Frequency (MHz)
Impedance (Ω)
MPZ1608R391A
0
50
100
150
200
250
300
350
100001000100101
Frequency (MHz)
Impedance (Ω)
MPZ1608Y221B
MPZ1608Y600B
MPZ1608Y151B
MPZ1608Y101B
0
100
200
300
400
500
600
100001000100101
Frequency (MHz)
Impedance (Ω)
MPZ1608D101B
MPZ1608D600B
MPZ1608D300B
(17/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series MPZ1608 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MPZ1608B471A MPZ1608S260A MPZ1608S300A
MPZ1608S600A MPZ1608S101A MPZ1608S121A
MPZ1608S181A MPZ1608S221A MPZ1608S331A
MPZ1608S471A MPZ1608S601A MPZ1608S102A
MPZ1608R391A MPZ1608Y600B MPZ1608Y101B
1 10 100 1000 10000
0
5
10
15
20
25
30
35
40
Frequency (MHz)
Impedance (Ω)
Z
R
X
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
0
100
200
300
400
500
Z
R
X
1 10 100 1000 10000
0
5
10
15
20
25
30
35
40
Frequency (MHz)
Impedance (Ω)
ZR
X
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
20
40
60
80
100
120
140
160
ZR
X
0
50
100
150
200
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
100
80
60
40
20
01 10 100 1000 10000
Z
X
R
Frequency (MHz)
Impedance (Ω)
300
100
50
150
200
250
01 10 100 1000 10000
ZR
X
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
R
X
Z
0
50
100
150
200
250
300
350
400
450
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
50
100
150
200
300
250
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
800
700
600
500
400
300
200
100
01 10 100 1000 10000
Z
R
X
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
1000
1200
ZR
X
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
ZR
X
0
100
200
300
400
500
600
700
1 10 100 1000 10000
0
20
40
60
80
100
120
140
Frequency (MHz)
Impedance (Ω)
R
X
Z
0
50
100
150
200
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
R
X
Z
500
400
300
200
100
01 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
R
X
Z
(18/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series MPZ1608 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MPZ1608Y151B MPZ1608Y221B MPZ1608D300B
MPZ1608D600B MPZ1608D101B
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
0
Z
R
X
50
100
150
200
250
300
350
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
R
X
Z
0
50
100
150
200
250
300
250
200
150
100
50
01 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
R
X
Z
1 10 100 1000 10000
0
100
200
300
400
500
600
Frequency (MHz)
Impedance (Ω)
RX
Z
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
R
X
Z
50
0
100
150
200
250
300
350
(19/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series
MPZ2012 Type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
1.25±0.2
2.0±0.2
0.5±0.3
0.85±0.2
Dimensions in mm
Dimensions in mm
10.8 0.8
1.2
(20/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series MPZ2012 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Please refer to the graph of RATED CURRENT vs. TEMPERATURE CHARACTERISTICS (derating) about the rating current at 85°C or more in
temperature of the product.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
○Rated current vs. temperature characteristics (derating)
Impedance
[100MHz] DC resistance
(:)max.
Rated current
(A)max. Part No.
(:)Tolerance
30 ±10:0.010 6 MPZ2012S300AT□□□
100 ±25% 0.020 4MPZ2012S101AT□□□
220 ±25% 0.040 3 MPZ2012S221AT□□□
330 ±25% 0.050 2.5 MPZ2012S331AT□□□
600 ±25% 0.100 2 MPZ2012S601AT□□□
1000 ±25% 0.150 1.5 MPZ2012S102AT□□□
Measurement item Product No. Manufacturer
Impedance E4991A+16192A Agilent Technologies
DC resistance Type-7556 Yokogawa
S300A
S331A
S101A
S221A
S601A
S102A
0
1
2
3
4
5
6
7
–55 –35 –15 5 25 45 65 85 105 125
Temperature (°C)
Rated current (A)
(21/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series MPZ2012 Type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MPZ2012S SERIES
100
300
500
700
1200
400
200
600
800
900
1000
1100
0100001000100101
Frequency (MHz)
Impedance (Ω)
MPZ2012S102A
MPZ2012S221A
MPZ2012S101A
MPZ2012S300A
MPZ2012S331A
MPZ2012S601A
(22/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series MPZ2012 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MPZ2012S300A MPZ2012S101A MPZ2012S221A
MPZ2012S331A MPZ2012S601A MPZ2012S102A
50
40
30
20
10
01 10 100 1000 10000
Z
X
R
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
0
20
40
60
80
100
120
140
Frequency (MHz)
Impedance (Ω)
Z
R
X
300
100
50
150
200
250
01 10 100 1000 10000
Z
R
X
Frequency (MHz)
Impedance (Ω)
400
350
300
250
200
150
100
50
01 10 100 1000 10000
Z
R
X
Frequency (MHz)
Impedance (Ω)
0
100
200
300
400
500
600
700
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
1200
400
200
600
800
1000
01 10 100 1000 10000
Z
R
X
Frequency (MHz)
Impedance (Ω)
(23/23)
001-01 / 20130723 / e9413_mpz.fm
• All specifications are subject to change without notice.
EMC Components
MPZ series
Packaging style
REEL DIMENSIONS
TAPE DIMENSIONS
Dimensions in mm
Ty p e A B P1 K
MPZ0603 0.38±0.05 0.68±0.05 2.0±0.05 0.5max.
MPZ1005 0.65±0.1 1.15±0.1 2.0±0.05 0.8max.
MPZ1608 1.1±0.2 1.9±0.2 4.0±0.1 1.1max.
MPZ2012 1.5±0.2 2.3±0.2 4.0±0.1 1.1max.
ø180±2.0
2.0±0.5
ø13±0.2
ø21±0.8
Dimensions in mm
1.0
ø60min.
14.4max.
8.4 +2.0
–0.0
4.0±0.12.0±0.05
B
A P1
8.0±0.3
1.75±0.1
3.5±0.05
K
1.5 +0.1
0
160min. Taping 200min.
300min.
Drawing direction Dimensions in mm