Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps Data Sheet Description Features Subminiature lamps (HLMX-PXXX, HLMX-QXXX, HLMP6XXX, HLMP-70XX) are available with the above standard options. Subminiature Lamps with Options 11, 12, 21, 22, 31, and 32 are suitable for surface mount applications and their leads are formed with gull wing, yoke bend and Z bend respectively. They are available in Tape and Reel (compatible to ANSI/EIA RS-481) or bulk. Options 1L, 1S, 2L, and 2S are right angle lead bends suitable for through hole applications. * Surface mount lead configurations Ordering Information To order Subminiature Lamps packaged with these standard options, include the appropriate option code along with the device catalog part number. Example: to order the HLMP-6300-F00xx with Option 11 gull wing leads in 12 mm embossed tape on 178 mm (7 inch) diameter reels, with 1500 lamps per reel; order as follows: HLMP-6300-F0011. Order quantities must be placed in reel increments only. Orders for partial reels will not be accepted. For additional information, please contact your local Avago Technologies sales office or franchised distributor for assistance. HLMX-XXXX-X X X X X Packaging Option Color Bin Selection Max. Iv Bin Min. Iv Bin 4 x 4 Prod. Part Number * Right angle lead bend for through hole mounting * Tape and reel in accordance with ANSI/EIA RS-481 specifications Selection Guide Option Code Package Configuration Package Outline Drawing 11 A, H, K, L 12 Gull Wing Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel[1] Gull Wing Lead, Bulk Packaging, Quantity of 500 Parts[2] Surface Mount Lead Configurations 14 Gull Wing Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel[1] 21 Yoke Leads, 12 mm Tape on 7 in. Dia. Reel 1500 Parts per Reel[1] 22 Yoke Leads, Bulk Packaging, Quantity of 500 Parts[2] 24 Yoke Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel[1] 31 Z-Bend Leads, 12 mm Tape on 7 in. Dia. Reel 1500 Parts per Reel[1] 32 34 1L Z-Bend Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel[1] 2.54 mm (0.100 inch) 5.08 mm (0.200 inch) 2SCenter Lead Spacing Notes: C, J, K, L Z-Bend Leads, Bulk Packaging, Quantity of 500 Parts[2] 1SCenter Lead Spacing 2L B, I, K, L Long Leads; 10.4 mm (0.410 in.) Right Angle Lead Bends for Short Leads; 3.7 mm (0.145 in.) Through Hole Long Leads; 9.2 mm (0.364 in.)Mounting D Short Leads; 3.7 mm (0.145 in.) G E F 1. SMT lamps are supplied in 12 mm embossed carrier tape. Minimum order is for one full reel, either 7 inch or 13 inch. All other order quantities must be in reel increments only. Orders for partial reels are not accepted. 2. Vapor barrier bags are used for bulk packaging. Package Dimensions, Lead Bend Options (A) Gull Wing Lead, Option 11, 12, and 14 CATHODE ANODE 3.81 (0.150) MAX. 0.13 (0.005) R TYP. 0.79 (0.031) 0.53 (0.021) 0.13 (0.005) MAX. CATHODE STRIPE ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) (B) "Yoke" Lead, Options 21, 22, and 24 CATHODE STRIPE Pkg A) Lamp - Gull Wing Lead 3.45 (0.136) NOM. 0.13 (0.005) TYP. 0.33 (0.013) R. TYP. 1.07 (0.042) TYP. 0.79 (0.031) 0.53 (0.021) 7.62 (0.300) MAX. CATHODE ANODE ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) (C) Z-Bend Lead, Option 31, 32, and 34 CATHODE STRIPE 4.06 (0.160) 4.57 (0.180) 0.79 (0.031) 0.53 (0.021) 0.76 (0.030) 0.51 (0.020) 3.05 (0.120) NOM. 5.59 (0.220) 6.10 (0.240) CATHODE ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) ANODE (D) Rt. Angle Bend Option 1L Pkg C) Lamp - Z-Bend 10.16 (0.400) 10.67 (0.420) 2.54 (0.100) NOM. CATHODE STRIPE ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) (E) Rt. Angle Bend Option 1S 3.43 (0.135) 3.94 (0.155) 2.54 (0.100) NOM. CATHODE STRIPE ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) Pkg E) Lamp - Rt Angle 1S (F) Rt. Angle Bend Option 2L 9.50 (0.374) 8.92 (0.351) 5.08 (0.200) NOM. CATHODE STRIPE ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) (G) Rt. Angle Bend Option 2S Pkg F) Lamp - Rt Angle 2L 3.43 (0.135) 3.94 (0.155) 5.08 (0.200) NOM. CATHODE STRIPE ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) Package Dimensions: Surface Mount Tape and Reel Options (H) 12 mm Tape and Reel, Gull Wing Lead PUSH PIN HOLE, GULL WING LEAD, DOME ONLY NOTES: 1. EMPTY COMPONENT POCKETS SEALED WITH TOP COVER TAPE. 2. MINIMUM LEADER LENGTH AT EITHER END OF THE TAPE IS 500 mm. 3. THE MAXIMUM NUMBER OF CONSECUTIVE MISSING LAMPS IS TWO. 4. IN ACCORDANCE WITH ANSI/EIA RS-481 SPECIFICATIONS, THE CATHODE IS ORIENTED TOWARDS THE TAPE SPROCKET HOLE. (I) 12 mm Tape and Reel, "Yoke" Lead NOTES: 1. EMPTY COMPONENT POCKETS SEALED WITH TOP COVER TAPE. 2. MINIMUM LEADER LENGTH AT EITHER END OF THE TAPE IS 500 mm. 3. THE MAXIMUM NUMBER OF CONSECUTIVE MISSING LAMPS IS TWO. 4. IN ACCORDANCE WITH ANSI/EIA RS-481 SPECIFICATIONS, THE CATHODE IS ORIENTED TOWARDS THE TAPE SPROCKET HOLE. (J) 12 mm Tape and Reel, Z-Bend Lead Reel DimensionsAll Dimensions Per ANSI/EIA Are in Millimeters Standard RS-481.(Inches). 7 inch Reel13 Inch Reel A C N T 178.0 2.0 (7.0 0.08) Dia. 13.0 (0.512) Dia. Typ. 50.0 (1.97) Min. 18.4 (0.72) mMax. 330 (12.9) Dia. Max. 13.0 (0.512) Dia. Typ. 100.0 (3.93) Min. 18.4 (0.72) Max. Embossed Carrier All Dimensions Tape Dimensions Are in Millimeters Per ANSI/EIA (Inches). Standard RS-481. Yoke and Gull Wing DomeGull Wing Flat Top Yoke Dome Z-Bend Dome Z-Bend Flat Top D 1.55 (0.061 0.002) Dia. 1.55 (0.061 0.002) Dia. 1.55 (0.061 0.002) Dia. (0.059 + 0.004) Dia. D1 1.0 (0.039) Dia. Min. N/A (No Push Pin Hole) N/A (No Push Pin Hole) D2 20.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min. E 1.75 0.1 (0.069) 1.75 0.1 (0.069) 1.75 0.1 (0.069) F 5.50 0.05 (0.217 0.002) K0 3.05 0.1 (0.120) Typ. 2.54 0.1 (0.100) Typ. 3.05 0.1 (0.120) Typ. P 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. P0 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. P2 2.0 (0.079 0.002) 2.0 (0.079 0.002) 2.0 (0.079 0.002) t 0.3 (0.012) Typ. 0.3 (0.012) Typ. 0.3 (0.012) Typ. W 12.0 0.3 (0.472 0.012) 12.0 0.3 (0.472 0.012) 12.0 0.3 (0.472 0.012) 1.50 + 0.10 (0.059 + 0.004) Dia. 1.50 + 0.25 (0.059 + 0.010) 20.2 (0.795) Dia. Min. 1.75 0.1 (0.069) 2.97 0.1 (0.117) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 2.0 (0.079 0.002) 0.305 0.013 (0.0120 0.0005) 12.0 0.3 (0.472 0.012) 1.50 + 0.10 N/A (No Push Pin Hole) 20.2 (0.795) Dia. Min. 1.75 0.1 (0.069) 3.05 0.1 (0.120) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 2.0 (0.079 0.002) 0.305 0.013 (0.0120 0.0005) 12.0 0.3 (0.472 0.012) (K) 12 mm Tape and Reel PART: LOT NO: Storage Condition: 5 to 30C @ 60% RH max. CUST PART: QTY: D/C: TAPE DATE: Baking is required under the following conditions: a) Humidity Indicator Card is >10% when read at 23 5C. b) The pack has been opened for more than 1 week. Baking recommended condition: 60 5C for 20 hours. 10 CAT: BIN: QA INSP. C/O: (L) Recommended Reflow Soldering Profile and Soldering Pad Pattern for SMT Options 10 - 30 SEC. 255 - 260 C 3 C/SEC. MAX. +5 230 -0 C MAX. 3C/SEC. MAX. TEMPERATURE TEMPERATURE 10 SEC. MAX. 183C 125-170C 3-4C/SEC. 2-3C/SEC. 6 C/SEC. MAX. 150 C 3 C/SEC. MAX. 50C 60-150 SEC. 120 SEC. MAX. 217 C 200 C 100 SEC. MAX. 60 - 120 SEC. 25C TIME TIME (Acc. to J-STD-020C) Recommended SnPb reflow soldering profile. Wait until device has cooled to room temperature before handling. 0.89 (0.035) Recommended Pb-free reflow soldering profile. 0.45 (0.018) 0.89 (0.035) 1.78 (0.070) 0.45 (0.018) 3.58 (0.140) Recommended soldering pad pattern for gull wing leads 11, 12, and 14. #27 DRILL 3.73 (0.147) DIA. CLEARANCE HOLE THROUGH PC BOARD #27 DRILL 3.73 (0.147) DIA. CLEARANCE HOLE THROUGH PC BOARD 1.27 (0.50) 0.45 (0.018) 1.27 (0.50) 0.89 (0.035) 0.64 (0.025) 3.30 (0.130) 6.60 (0.260) 0.89 (0.035) 0.45 (0.018) 3.30 (0.130) DIMENSIONS ARE IN MILLIMETERS (INCHES) Recommended soldering pad pattern for yoke leads 21, 22, and 24. For product information and a complete list of distributors, please go to our website: DIMENSIONS ARE IN MILLIMETERS (INCHES) 6.60 (0.260) Recommended soldering pad pattern for Z-bend leads 31, 32, and 34. www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2008 Avago Technologies. All rights reserved. Obsoletes 5989-1206EN AV02-0069EN - September 2, 2008