B72210S250K101V57 - EPCOS - Datasheet.Live

CMF (Military RN and RL)

www.vishay.com Vishay Dale

Revision: 16-Sep-16 1Document Number: 31027

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Metal Film Resistors, Axial, Military, MIL-R-10509 Qualified,

Precision, Type RN and MIL-PRF-22684 Qualified, Type RL

FEATURES

• Very low noise (-40 dB)

• Very low voltage coefficient (5 ppm/V)

• Controlled temperature coefficient

• Flame retardant epoxy coating

• Commercial alternatives to military styles are available

with higher power ratings. See CMF Industrial data sheet:

(www.vishay.com/doc?31018)

Notes

(1) Continuous working voltage shall be or maximum working voltage, whichever is less.

(2) Formerly rated at 1 W and is the direct replacement for RN70 of MIL-R-10509 rev. D.

(3) Tolerances of ± 0.1 %, ± 0.25 % and ± 0.5 % are not applicable to characteristic D.

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL



MODEL

MIL

STYLE

MIL

SPEC.

SHEET

POWER

RATING

70 °C

POWER

RATING

125 °C

MAX.

WORKING

VOLTAGE

(1)

RESISTANCE

RANGE



MIL-R-10509

± 100 ppm/°C

(D)

RESISTANCE

RANGE



MIL-R-10509

± 50 ppm/°C

(C)

RESISTANCE

RANGE



MIL-R-10509

± 25 ppm/°C

(E)

RESISTANCE

RANGE



MIL-PRF-22684

TOL.

(3)

± %

DIELECTRIC

STRENGTH

CMF50 RN50 08 - 0.05 200 - 10 to 100K 10 to 100K - 0.1, 0.25,

0.5, 1 450

CMF55 RN55 07 0.125 0.10 200 10 to 301K 49.9 to 100K 49.9 to 100K - 0.1, 0.25,

0.5, 1 450

CMF60 RN60 01 0.25 0.125 300 10 to 1M 49.9 to 499K 49.9 to 499K - 0.1, 0.25,

0.5, 1 500

CMF65 RN65 02 0.50 0.25 350 10 to 2M 49.9 to 1M 49.9 to 1M - 0.1, 0.25,

0.5, 1 900

CMF70 RN70 03 0.75

(2)

0.50 500 10 to 2.49M 24.9 to 1M 24.9 to 1M - 0.1, 0.25,

0.5, 1 900

CMF07 RL07 01 0.25 - 250 - - - 51 to 150K 2, 5 450

CMF20 RL20 02 0.50 - 350 - - - 4.3 to 470K 2, 5 700

TECHNICAL SPECIFICATIONS

PARAMETER UNIT CONDITION

Voltage Coefficient ppm/V 5 when measured between 10 % and full rated voltage

Insulation Resistance  1010 min. dry;  108 min. after moisture test

Operating Temperature Range °C -65/+175 (see derating curves for military range)

Terminal Strength Ib 5 pound pull test for RL07/RL20; 2 pound pull test for all others

Solderability Continuous satisfactory coverage when tested in accordance

with MIL-R-10509 and MIL-PRF-22684

P x R

CMF (Military RN and RL)

www.vishay.com Vishay Dale

Revision: 16-Sep-16 2Document Number: 31027

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544).

APPLICABLE MIL-SPECS

MIL-R-10509 and MIL-PRF-22684: The CMF models meet

or exceed the electrical, environmental and dimensional

requirements of MIL-R-10509 and MIL-PRF-22684.

Noise: Vishay Dale metal film resistors have exceptionally

low noise level. Average for standard resistance range is

0.10 μV per V over a decade of frequency, with low and

intermediate resistance values typically below 0.05 μV per V.

GLOBAL PART NUMBER INFORMATION

MIL STYLE TOLERANCE

CODE

RN50 E = 25 ppm 3 digit significant B = ± 0.1 %

RN55 C = 50 ppm figure, followed by C = ± 0.25 %

D = ± 0.5 %

0R01 = 10 Ω

2512 = 21.5 k Ω

2494 = 2.49 M Ω

New Global Part Numbering: RN60D3483FR36 (preferred part numbering format)

RN 6 0D 3 4 8 3 F R3 6

Historical Part Number example: RN60D3483F (will continue to be accepted)

3483DRN60

MIL STYLE CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE PACKAGING

RN65

RN70

RN60

= 100 ppm a multiplier

F =

1 %

Blank = standard

(Dash number)

88 = hot solder dip

143 = non-magnetic

R36

PACKAGING SPECIAL

CHARACTERISTIC RESISTANCE

VALUE

B14 = tin/lead, bulk

BSL = tin/lead, bulk,

single lot date code

R36 = tin/lead, T/R (full)

RE6 = tin/lead, T/R (1000 pieces)

RSL = tin/lead, T/R,

single lot date code

Use “R” for

values < 100 Ω

MIL STYLE TOLERANCE

CODE PACKAGING

RL07 S = solderable 2 digit significant G = ± 2 % B14 = tin/lead, bulk

BSL = tin/lead, bulk, single lot date code

R36 = tin/lead, T/R (full)

RE6 = tin/lead, T/R (1000 pieces)

RSL = tin/lead, T/R, single lot date code

RL20 figure, followed by J = ± 5 %

a multiplier

4R3 = 4.3 Ω

202 = 2.0 k Ω

474 = 470 k Ω

New Global Part Numbering: RL07S471JR36 (preferred part numbering format)

Historical Part Number example: RL07S471J (will continue to be accepted)

MIL STYLE LEAD MATERIAL RESISTANCE VALUE TOLERANCE CODE PACKAGING

RL07S471JR36

RL07 S 471 J R36

LEAD MATERIAL RESISTANCE

VALUE

Use “R” for

values < 10 Ω

SPECIAL

Blank = standard

(Dash number)

88 = hot solder dip

143 = non-magnetic

MATERIAL SPECIFICATIONS

Element Nickel-chrome alloy

Coating Flame retardant epoxy, formulated for

superior moisture protection

Core Fire-cleaned high purity ceramic

Termination Standard lead material is solder-coated

copper. Solderable and weldable.

CAGE CODE: 91637

ENVIRONMENTAL SPECIFICATIONS

General

Environmental performance is shown in the

Environmental Performance table. Test methods

are those specified in MIL-R-10509 and

MIL-PRF-22684.

Shelf Life Resistance shifts due to storage at room

temperature are negligible.

CMF (Military RN and RL)

www.vishay.com Vishay Dale

Revision: 16-Sep-16 3Document Number: 31027

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Vishay Dale CMF resistors have an operating temperature range of -65 °C to +175 °C. They must be derated according to the

following curves:

DIMENSIONS in inches (millimeters)

Note

(1) Lead length for product in bulk pack. For product supplied in tape and reel, the actual lead length would be based on the body size, tape

spacing and lead trim.

Notes

• Commercial equivalents of military styles are available with higher power ratings. Consult factory.

(1) Formerly rated at 1 W and is the direct replacement for RN70 of MIL-R-10509 rev. D.

VISHAY DALE

MODEL AB C

(MAX.) D

CMF50 0.150 ± 0.020

(3.81 ± 0.51)

0.065 ± 0.015

(1.65 ± 0.38)

0.244

(6.20)

0.016 ± 0.002

(0.41 ± 0.05)

CMF55 0.240 ± 0.020

(6.10 ± 0.51)

0.090 ± 0.008

(2.29 ± 0.20)

0.290

(7.37)

0.025 ± 0.002

(0.64 ± 0.05)

CMF60 0.344 ± 0.031

(8.74 ± 0.79)

0.145 ± 0.015

(3.68 ± 0.38)

0.425

(10.80)

0.025 ± 0.002

(0.64 ± 0.05)

CMF65 0.562 ± 0.031

(14.27 ± 0.79)

0.180 ± 0.015

(4.57 ± 0.38)

0.687

(17.45)

0.025 ± 0.002

(0.64 ± 0.05)

CMF70 0.562 ± 0.031

(14.27 ± 0.79)

0.180 ± 0.015

(4.57 ± 0.38)

0.687

(17.45)

0.032 ± 0.002

(0.81 ± 0.05)

CMF07 0.240 ± 0.020

(6.10 ± 0.51)

0.090 ± 0.008

(2.29 ± 0.20)

0.290

(7.37)

0.025 ± 0.002

(0.64 ± 0.05)

CMF20 0.375± 0.040

(9.53 ± 1.02)

0.145 ± 0.015

(3.68 ± 0.38)

0.425

(10.80)

0.032 ± 0.002

(0.81 ± 0.05)

MILITARY POWER RATING

WATTAGE

MILITARY QUALIFIED

MIL-R-10509 MIL-PRF-22684

AT +70 °C

(D)

AT +125 °C

(C and E) AT +70 °C

0.05 - RN50 -

0.10 - RN55 -

0.125 RN55 RN60 -

0.25 RN60 RN65 RL07

0.50 RN65 RN70 RL20

0.75 (1) RN70 - -

ETAR FO %

AMBIENT TEMPERATURE °C

120

100

MIL-R-10509

Char. C and E Rating

MIL-R-10509

Char. D Rating

MIL-PRF-22684

DERATING

170150130110907050

(Max.)

1.50 ± 0.125 (1)

(38.10 ± 3.18)

CMF (Military RN and RL)

www.vishay.com Vishay Dale

Revision: 16-Sep-16 4Document Number: 31027

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• RL series are color banded per MIL-PRF-22684.

MARKING (per MIL-PRF-10509)

Characteristics: D = 100 ppm, C = 50 ppm, E = 25 ppm

Tolerance: F = 1 %, D = 0.5 %, C = 0.25 %, B = 0.1 %

Value = Three significant figures and multiplier

J = JAN (Joint Army - Navy) brand

RN50: (3 lines) RN55, RN60, RN65, RN70 (4 lines)

J50D

1211

F137

JAN, type, characteristic

Value

Tolerance and 3 digit date code

DALE

0137J

RN55D

1211F

Company logo

4 digit date code and JAN brand

Type and characteristic

Value and Tolerance

PERFROMANCE

REQUIREMENT MIL-R-10509 MIL-PRF-22684

CHARACTERISTIC D CHARACTERISTIC C CHARACTERISTIC E

MIL Temperature Coefficient +200 ppm/°C -500 ppm/°C ± 50 ppm/°C ± 25 ppm/°C ± 200 ppm/°C

Applicable Vishay Dale

Temperature Coefficient ± 100 ppm/°C ± 50 ppm/°C ± 25 ppm/°C ± 200 ppm/°C

TEST MILmax. MILmax. MILmax. MILmax.

Thermal Shock ± 0.50 % R± 0.25 % R± 0.25 % R± 1.00 % R

Short Time Overload ± 0.50 % R± 0.25 % R± 0.25 % R± 0.50 % R

Low Temperature Operation ± 0.50 % R± 0.25 % R± 0.25 % R± 0.50 % R

Moisture Resistance ± 1.50 % R± 0.50 % R± 0.50 % R± 1.50 % R

Shock ± 0.50 % R± 0.25 % R± 0.25 % R± 0.50 % R

Vibration ± 0.50 % R± 0.25 % R± 0.25 % R± 0.50 % R

Load Life ± 1.00 % R± 0.50 % R± 0.50 % R± 2.00 % R

Dielectric Withstanding

Voltage ± 0.50 % R± 0.25 % R± 0.25 % R± 0.50 % R

Effect of Solder ± 0.50 % R± 0.10 % R± 0.10 % R± 0.50 % R

THERMAL RESISTANCE

100

120

APPLIED POWER IN W

HEAT RISE (°C ABOVE AMBIENT)

0 0.125 0.25 0.375 0.5 0.625 0.75 0.875 1 1.125

CMF65,

CMF70

CMF50 CMF55

CMF60

CMF20

CMF07

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2019 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.