a 6296 San Ignacio, Suite E & F, San Jose, CA 95119 p 408 225 4314 f 408 225 2079 e www.allsensors.com all sensors
All Sensors 03/23/03
+Vsupply
3
+ Voutput
2
-Vsupply
1
-Voutput
4
• 0-100 psi Pressure Ranges
• 0.5 % linearity
Physical Dimensions
• Medical Instrumentation
• Environmental Controls
• HVAC
General Description
Applications
Features
Surface Mount Basic Pressure Sensors
Equivalent Circuit
Input Resittance
Output Resistance
TCR
TCS
3.3 k ohm
3.3 k ohm
2600 ppm/° C
-2200 ppm/° C
The BASIC Serices of pressure sensors use a silicon micromachined (MEMS) pressure sensor in the most basic
configuration. The package is a ceramic surface mount configuration to provide the smallest footprint possible.
Best temperature compensation is realized when the sensor has a constant current excitation.
This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like.
Specifications are written for constant voltage of 3.0 volts.
The output of the device is ratiometric to the supply voltage..
4
3
1
2
Surface Mount Basic Pressure Sensors
Minimum
Parameter , note 1
Offset Voltage
T emperature Ef fect on Of fset, note 2
T emperature Ef fect on Resistance, note 2
T emperature Ef fect on Span, note 2
Linearity , hysteresis error , note 4
Input Resistance
Output Resistance
Long term stability of span, note 3
Nominal
2600
-2200
0.1
3.3
3.3
0.1
Maximum
±25
±2.0
±0.5
Units
mv
% span
ppm/°C
ppm/°C
% span
kohms
kohms
% span
Specification Notes
NOTE 1: ALL PARAMETERS ARE MEASURED AT 3.0 VOLT EXCITATION, FOR THE NOMINAL FULL SCALE PRESSURE AND ROOM TEMPERATURE
UNLESS OTHERWISE SPECIFIED. PRESSURE MEASUREMENTS ARE WITH NEGATIVE PRESSURE TO THE SINGLE PORT CONFIGURATION.
NOTE 2: SHIFT IS RELATIVE TO 25°C.
NOTE 3: SHIFT IS WITHIN THE FIRST YEAR OF OPERATION.
NOTE 4: MEASURED AT ONE-HALF FULL SCALE RATED PRESSURE USING BEST STRAIGHT LINE CURVE FIT.
NOTE 5: THE VOLTAGE ADDED TO THE OFFSET VOLTAGE AT FULL SCALE PRESSURE.
All Sensors reserves the right to make changes to any products herein. All Sensors does not assume any liability arising out of the application or use of any
product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
Operating Pressure
0 - 5 PSI
0 - 15 PSI
0 - 30 PSI
0 - 100 PSI
Standard Pressur e Ranges
Supply Supply Voltage VS
Lead T emperature
(soldering 2-4 sec.)
6 Vdc
250°C
Pressure Sensor Characteristics Maximum Ratings
T emperature Ranges
Compensated
Operating
Storage
Humidity Limits
0 to 70° C
-25 to 85° C
-40 to 125° C
0 to 95% RH
(non condensing)
Environmental Specifications
Common Performance Characteristic
One Port
Part Number
5 PSI-GF-BASIC-SMT
15 PSI-GF-BASIC-SMT
30 PSI-GF-BASIC-SMT
100 PSI-GF-BASIC-SMT
Proof Pressure
15 PSI
45 PSI
100 PSI
200 PSI
note 1: Pressure
Sensitivity (mv/psi)
10.8 ± 1.8
5.3 ± 1.6
2.6 ± 0.8
1.05 ± 030
a 6296 San Ignacio, Suite E & F, San Jose, CA 95119 p 408 225 4314 f 408 225 2079 e www.allsensors.com all sensors
All Sensors 03/23/03