DATA SHEET PHOTOCOUPLER PS2533-1,-2,-4,PS2533L-1,-2,-4 HIGH COLLECTOR TO EMITTER VOLTATGE HIGH ISOLATION VOLTAGE MULTI PHOTOCOUPLER SIRIES -NEPOC Series- DESCRIPTION The PS2533-1, -2, -4 and PS2533L-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington connected phototransistor. The PS2533-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2533L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. FEATURES * High collector to emitter voltage (VCEO = 350 V) * High Isolation voltage (BV = 5 000 Vr.m.s.) * High current transfer ratio (CTR = 4 000 % TYP.) * High-speed switching (tr, tf = 100 s TYP.) * Ordering number of tape product: PS2533L-1-E3, E4, F3, F4, PS2533L-2-E3, E4 * Safety standards * UL approved: File No. E72422 (S) * BSI approved: No. 8221/8222 * CSA approved: No. CA 101391 * NEMKO approved: No. P98101708 * SEMKO approved: No. 9824187/01-02 * DEMKO approved: No. 307863 * FIMKO approved: No. F1 11397 * VDE0884 approved (Option) APPLICATIONS * Telephone, Exchange equipment * FAX/MODEM The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. Document No. PN10233EJ01V0DS (1st edition) (Previous No. P11435EJ6V0DS00) Date Published February 2003 CP(K) Printed in Japan The mark * shows major revised points. NEC Compound Semiconductor Devices 1990, 2003 PS2533-1,-2,-4,PS2533L-1,-2,-4 PACKAGE DIMENSIONS (Unit : mm) DIP Type (New package) PS2533-1 4.60.35 3 6.50.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 2 7.62 3.50.3 3.20.4 4.150.4 TOP VIEW 4 0 to 15 +0.1 0.25 -0.05 1.250.15 0.500.10 0.25 M 2.54 Caution New package 1-ch only DIP Type PS2533-1 9.70.5 3 3.30.5 4.150.4 2 7.62 3.50.3 1 0 to 15 +0.1 0.25 -0.05 1.250.15 8 1 0.500.10 1.250.15 0.500.10 0.25 M TOP VIEW 7 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 6.50.5 1. Anode 2. Cathode 3. Emitter 4. Collector 6.50.5 3.30.5 4.150.4 PS2533-2 TOP VIEW 4 2 3 4 7.62 3.50.3 4.60.5 0 to 15 +0.1 0.25 -0.05 0.25 M 2.54 2.54 PS2533-4 6.50.5 19.80.5 TOP VIEW 16 15 14 13 12 11 10 9 1 2 3.50.3 3.30.5 4.150.4 7.62 0.500.10 1.250.15 2.54 2 0 to 15 +0.1 0.25 -0.05 0.25 M Data Sheet PN10233EJ01V0DS 3 4 5 6 7 8 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector PS2533-1,-2,-4,PS2533L-1,-2,-4 Lead Bending Type (New package) PS2533L-1 TOP VIEW 4.60.35 4 3 6.50.5 1. Anode 2. Cathode 3. Emitter 4. Collector 2 0.1 +0.1 -0.05 3.50.3 0.25 +0.1 -0.05 1 0.90.25 9.600.4 1.250.15 0.25 M 2.54 0.15 Caution New package 1-ch only Lead Bending Type PS2533L-2 PS2533L-1 TOP VIEW 0.90.25 9.600.4 0.25 M 1 1.250.15 0.25 M 6 5 2 3 4 0.15 2.54 0.90.25 9.600.4 0.15 PS2533L-4 TOP VIEW 16 15 14 13 12 11 10 9 6.50.5 19.80.5 1.250.15 0.25 M 2.54 0.15 2 3 4 5 6 7 8 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 0.1 +0.1 -0.05 0.25 +0.1 -0.05 1 3.50.3 2.54 7 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 3.50.3 0.1 +0.1 -0.05 3.50.3 0.25 +0.1 -0.05 2 1.250.15 8 6.50.5 6.50.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 TOP VIEW 9.70.5 3 0.1 +0.1 -0.05 4 0.25 +0.1 -0.05 4.60.5 0.90.25 9.600.4 Data Sheet PN10233EJ01V0DS 3 PS2533-1,-2,-4,PS2533L-1,-2,-4 MARKING EXAMPLE PS2533-1 PS2533-2, -4 No. 1 pin Mark No. 1 pin Mark 2533 M 003 M Assembly Lot 0 03 M Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG 4 PS2533-2 M 003 Made in Japan Made in Taiwan Blank F Data Sheet PN10233EJ01V0DS 0 03 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG E Country Assembled Type Number Assembly Lot Made in Japan Made in Taiwan Blank F PS2533-1,-2,-4,PS2533L-1,-2,-4 ORDERING INFORMATION Part Number PS2533-1 Package 4-pin DIP Packing Style Magazine case 100 pcs PS2533L-1 Safety Standard Approval Standard products Application Part *1 Number PS2533-1 (UL, CSA, BSI, PS2533L-1-E3 Embossed Tape 1 000 pcs/reel PS2533L-1-E4 NEMKO, SEMKO, DEMKO, FIMKO PS2533L-1-F3 Embossed Tape 2 000 pcs/reel approved) PS2533L-1-F4 PS2533-2 8-pin DIP Magazine case 45 pcs PS2533-2 PS2533L-2 PS2533L-2-E3 Embossed Tape 1 000 pcs/reel PS2533L-2-E4 PS2533-4 16-pin DIP Magazine case 20 pcs 4-pin DIP Magazine case 100 pcs PS2533-4 PS2533L-4 PS2533-1-V PS2533L-1-V VDE0884 approved PS2533-1 products (Option) PS2533L-1-V-E3 Embossed Tape 1 000 pcs/reel PS2533L-1-V-E4 PS2533L-1-V-F3 Embossed Tape 2 000 pcs/reel PS2533L-1-V-F4 PS2533L-2-V 8-pin DIP Magazine case 45 pcs PS2533-2 PS2533L-2-V PS253L-2-V-E3 Embossed Tape 1 000 pcs/reel PS2533L-2-V-E4 PS2533-4-V 16-pin DIP Magazine case 20 pcs PS2533-4 PS2533L-4-V *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10233EJ01V0DS 5 PS2533-1,-2,-4,PS2533L-1,-2,-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Ratings Diode Parameter Symbol Forward Current (DC) IF 80 mA Reverse Voltage VR 6 V Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 PS2533-2, -4, PS2533L-2, -4 PS2533-1, PS2533L-1 Unit PD/C 1.5 1.2 mWC PD 150 120 mW/ch IFP 1 A Collector to Emitter Voltage VCEO 350 V Emitter to Collector Voltage VECO 0.6 V IC 150 mA/ch Collector Current Power Dissipation Derating Power Dissipation *2 PC/C 3.0 2.4 mW/C PC 300 240 mW/ch Isolation Voltage BV 5 000 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C *1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output 6 Data Sheet PN10233EJ01V0DS PS2533-1,-2,-4,PS2533L-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Symbol Conditions Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz MIN. TYP. MAX. Unit 1.15 1.40 V 5 A 30 pF Transistor Collector to Emitter Dark Current ICEO VCE = 350 V, IF = 0 mA Coupled Current Transfer Ratio (IC/IF) CTR IF = 1 mA, VCE = 2 V Collector Saturation Voltage VCE(sat) IF = 1 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.6 pF *1 tr VCC = 5 V, IC = 10 mA, RL = 100 100 s Rise Time Fall Time *1 tf 1 500 4 000 400 nA 6 500 % 1.0 V 11 10 100 *1 Test circuit for switching time Pulse input VCC (PW = 1 ms, Duty cycle = 1/10) IF 50 VOUT RL = 100 Data Sheet PN10233EJ01V0DS 7 PS2533-1,-2,-4,PS2533L-1,-2,-4 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 150 PS2533-1 PS2533L-1 100 1.5 mW/C PS2533-2, -4 PS2533L-2, -4 50 1.2 mW/C 0 25 50 75 100 125 300 PS2533-1 PS2533L-1 200 PS2533-2, -4 PS2533L-2, -4 3.0 mW/C 100 2.4 mW/C 0 150 25 50 75 100 FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 160 TA = +100 C +75 C +50 C 140 Collector Current IC (mA) 10 +25 C 0 C -25 C -55 C 1 0.1 0.01 0.6 0.8 1.0 1.2 1.4 1.6 5.0 120 4.5 mA mA A m 4.0 mA 5 . 3 mA 3.0 mA 2.5 A 2.0 m 100 80 1.5 mA 60 1.0 mA 40 0 IF = 0.5 mA 1 2 3 4 5 6 7 8 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 500 VCE = 350 V 1 Collector Current IC (mA) Collector to Emitter Dark Current ICEO (A) 150 Ambient Temperature TA (C) 20 100 n 10 n 1n 100 p -50 -25 0 25 50 75 100 mA IF = 5.0 A 2.0 m 1.0 mA 100 50 0.5 mA 10 5 1 0.5 0.1 0.0 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE(sat) (V) Ambient Temperature TA (C) 8 125 Ambient Temperature TA (C) 100 Forward Current IF (mA) 400 Data Sheet PN10233EJ01V0DS 1.2 PS2533-1,-2,-4,PS2533L-1,-2,-4 ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, 5 000 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 C, IF = 1 mA, VCE = 2 V 0.2 0.0 -50 -25 0 25 50 75 4 000 VCE = 2 V Sample A B 3 000 2 000 1 000 0 0.1 100 0.5 1 5 10 15 Ambient Temperature TA (C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE FREQUENCY RESPONSE 5 VCC = 10 V, IC = 10 mA tr 0 100 td 50 tf 10 5 ts 1 20 Current Transfer Ratio CTR (%) 1.2 500 Switching Time t (s) CURRENT TRANSFER RATIO vs. FORWARD CURRENT Normalized Gain Gv Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 50 100 200 500 2k 100 10 -10 VCE = 4 V, Vin = 0.1 Vp-p -15 -20 -25 1k RL = 1 k -5 -30 0.01 1 k 1 F Vin 47 0.1 RL Vout 1 10 100 Frequency f (kHz) Load Resistance RL () LONG TERM CTR DEGRADATION 1.2 CTR (Relative Value) 1.0 IF = 1 mA, TA = 25 C 0.8 IF = 1 mA, TA = 60 C 0.6 0.4 0.2 0.0 10 102 103 104 105 106 Time (Hr) Remark The graphs indicate nominal characteristics. Data Sheet PN10233EJ01V0DS 9 PS2533-1,-2,-4,PS2533L-1,-2,-4 TAPING SPECIFICATIONS (Unit : mm) 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2533L-1-E3 PS2533L-1-E4 Outline and Dimensions (Reel) 2.00.5 21.00.8 80.01.0 R 1.0 2542.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 1 000 pcs/reel 10 Data Sheet PN10233EJ01V0DS 15.9 to 19.4 Outer edge of flange PS2533-1,-2,-4,PS2533L-1,-2,-4 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2533L-1-F3 PS2533L-1-F4 Outline and Dimensions (Reel) 2.00.5 21.00.8 1001.0 R 1.0 3302.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 2 000 pcs/reel Data Sheet PN10233EJ01V0DS 15.9 to 19.4 Outer edge of flange 11 PS2533-1,-2,-4,PS2533L-1,-2,-4 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 10.40.1 1.550.1 12.00.1 0.3 Tape Direction PS2533L-2-E4 PS2533L-2-E3 Outline and Dimensions (Reel) R 1.0 1001.0 2.00.5 13.00.2 3302.0 2.00.5 21.00.8 17.51.0 21.51.0 Packing: 1 000 pcs/reel 12 Data Sheet PN10233EJ01V0DS 15.9 to 19.4 Outer edge of flange PS2533-1,-2,-4,PS2533L-1,-2,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. Data Sheet PN10233EJ01V0DS 13 PS2533-1,-2,-4,PS2533L-1,-2,-4 USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 14 Data Sheet PN10233EJ01V0DS PS2533-1,-2,-4,PS2533L-1,-2,-4 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884) Parameter Symbol Application classification (DIN VDE 0109) for rated line voltages 300 Vr.m.s. for rated line voltages 600 Vr.m.s. Speck Unit IV III Climatic test class (DIN IEC 68 Teil 1/09.80) 55/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.2 x UIORM, Pd < 5 pC UIORM Upr 890 1 068 Vpeak Vpeak Test voltage (partial discharge test, procedure b for all devices test) Upr = 1.6 x UIORM, Pd < 5 pC Upr 1 424 Vpeak Highest permissible overvoltage UTR 6 000 Vpeak Degree of pollution (DIN VDE 0109) 2 Clearance distance > 7.0 mm Creepage distance > 7.0 mm Comparative tracking index (DIN IEC 112/VDE 0303 part 1) CTI Material group (DIN VDE 0109) 175 III a Storage temperature range Tstg -55 to +150 C Operating temperature range TA -55 to +100 C Ris MIN. Ris MIN. 10 11 10 Tsi Isi Psi 175 400 700 C mA mW Ris MIN. 10 Isolation resistance, minimum value VIO = 500 V dc at TA = 25 C VIO = 500 V dc at TA MAX. at least 100 C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = 175 C (Tsi) Data Sheet PN10233EJ01V0DS 12 9 15 PS2533-1,-2,-4,PS2533L-1,-2,-4 APPLICATION FOR TELEPHONE (EXAMPLE) LINE Bell Ringing Signal (75 Vr.m.s., 16 Hz) PS2505/PS2506 PS2705/PS2707 PS2805 etc. PS2521 PS2525 VCC Bell Ringing Detect Line Observe VCC Dial Pulse PS2532/PS2533 Generator PS2732/PS2733 PS2832/PS2833 Dialer Circuit CPU OCMOS FET PS7xxx Speech Circuit IN OUT 16 Data Sheet PN10233EJ01V0DS PS2533-1,-2,-4,PS2533L-1,-2,-4 * The information in this document is current as of February, 2003. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 Data Sheet PN10233EJ01V0DS 17 PS2532-1,-2,-4,PS2532L-1,-2,-4 SAFETY INFORMATION ON THIS PRODUCT Caution GaAs Products The product contains gallium arsenide, GaAs. GaAs vapor and powder are hazardous to human health if inhaled or ingested. * Do not destroy or burn the product. * Do not cut or cleave off any part of the product. * Do not crush or chemically dissolve the product. * Do not put the product in the mouth. Follow related laws and ordinances for disposal. The product should be excluded from general industrial waste or household garbage. For further information, please contact NEC Compound Semiconductor Devices, Ltd. 5th Sales Group, Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579 E-mail: salesinfo@csd-nec.com NEC Compound Semiconductor Devices Hong Kong Limited Hong Kong Head Office FAX: +852-3107-7309 TEL: +852-3107-7303 Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Korea Branch Office FAX: +82-2-558-5209 TEL: +82-2-558-2120 NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-01 FAX: +49-211-6503-487 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0302