AMORPHOUS CHOKE COILS
CAT. No. E1008D
?GENERAL SPECIFICATION
*1 Rated inductance tolerance : P25%, the inductance at current 0[A] indicates the reference value.
*2 The number of turns indicates the reference value. The specification of the inductance takes precedence over that of the number of turns.
19.0
AM05751JRH
20 310 250 20 72.537T 39.028.3
AM20251JLH
15 550 450 35 72.049T 40.021.2
AM15451JLH
12 860 700 53 72.561T 39.017.0
AM12701JLH
15 380 300 26 55.5
41T 38.021.2
AM15301JKH
12 590 450 41 55.5
51T 38.017.0
AM12451JKH
10 840 650 53 56.0
61T 38.014.1
AM10651JKH
12 420 350 33 55.0
47T 32.0
17.0
AM12351JCH
10 600 500 45 54.556T 32.514.1
AM10501JCH
8 1000 800 73 56.072T 33.511.3
AM08801JCH
8 600 500 53 46.5
59T 32.0
11.3
AM08501JBH
6 970 800 94 45.0
75T 30.58.5
AM06801JBH
5 1500 1200 140 45.592T 31.57.1
AM05122JBH
6 740 650 87 41.0
69T 32.58.5
AM06651JAH
5 1000 900 115 40.5
81T 32.0
7.1
AM05901JAH
5 890 750 110 40.585T 27.0
7.1
AM04102JRH
4 1200 1000 160 40.5100T 26.55.7
AM04801J8H
4 1100 800 150 32.5
84T 25.5
5.7
AM03152J8H
3 2000 1500 230 34.0
11
6T 26.04.2
AM03901J7H
3 1100 900 140 33.0102T 19.54.2
AM02202J7H
2 2400 2000 350 33.0155T2.8
1.1B4p -
1.1B3p -
1.2B2p -
1.1B3p -
1.2B2p -
1.1B2p -
1.2B2p -
1.1B2p -
1.0B2p -
1.0B2p -
1.2B1p -
1.1B1p -
1.2B1p -
1.1B1p -
1.1B1p -
1.0B1p -
0.9B1p -
0.85B1p -
0.9B1p -
0.7B1p -
AM05
5
0
1
J8H
5 600 500 80 33.0
65T 28.0
7.1 1.1B1p -
mm
Peak
current
A
Rated
current
Arms
Inductance
Rating
D.C.R.
mO
(max)
Winding
mmfBlines-turns
Outside
dimension
DW
mm
P/N
mHmH
0[A]
12
*
*
(100kHz)
The coils of the lying type are also provided for all the items listed in the table above. For a coil of the type, symbol E should be added to the
end of the part number shown in the table (e.g. AM05901JAE).
The coils of the pedestal attachment type are also provided for the items with symbol @ in the table above. For a coil of the type, symbol D
should be added to the end of the part number shown in the table (e.g. AM05901JAD).
The items preceded by symbol include two types, or the depth type with pedestal and the bed type with pedestal. To order the item of the
depth or bed type, add D or B at the end of the item of the item name respectively,
as shown in the examples below:(AM05901JAD for the depth type with pedestal) (AM05901JAB for the bed type with pedestal)
*Order the auxiliary pins separately if they are required for the pedestal.
a
D
W(Reference sample)
L
D : Maximum outer diameter
W : Maximum width
Total lead length (L)* : 30mm (+3 mm, -3mm)
Soldering boundary (a)* : 1.5mmMAX
* The bottom of the core or coil ( )is defined as
the base surface.
?MAJOR USES
@For harmonic counter-measure active filter
@For normal mode line filter
?FEATURES
@Excellent d.c.current pre-loadability characteristics
@Reduction of core loss in comparison with the conventional CM-series
coils, providing low temperature rises for uses at power of 100V or
larger
@Excellent temperature stability
(1/2)
AMORPHOUS CHOKE COILS
CAT. No. E1008D
?dc-current pre-loadability (1) <Example>
@Core : C251510J3, C251515J2, C322015J2, Frequency : 100 kHz
?dc-current pre-loadability (2) <Example>
@Core : C322020J2, C372320J2, C462720J2, Frequency : 100 kHz
?dc-current pre-loadability (4) <Example>
@Core : C462725J2, C603525J2, Frequency : 100 kHz
?dc-current pre-loadability (3) <Example>
@Core : C462720J2, C462725J2, Frequency : 100 kHz
?Temperature dependence
@Frequency : 100 kHz, AM choke
?Inductance-Frequency
@AM choke
(2/2)
