AMORPHOUS CHOKE COILS (Reference sample) a D W ?MAJOR USES L @For harmonic counter-measure active filter @For normal mode line filter D : Maximum outer diameter W : Maximum width Total lead length (L)* : 30mm (+3 mm, -3mm) Soldering boundary (a)* : 1.5mmMAX * The bottom of the core or coil ( )is defined as the base surface. ?FEATURES @Excellent d.c.current pre-loadability characteristics @Reduction of core loss in comparison with the conventional CM-series coils, providing low temperature rises for uses at power of 100V or larger @Excellent temperature stability ?GENERAL SPECIFICATION Inductance *1 (100kHz) Rating 0 [A] mH mH P/N Rated current Arms Peak current A AM02202J7H 2 2.8 2400 AM03901J7H 3 4.2 AM03152J8H 3 AM04801J8H D.C.R. mO (max) Winding mmfBlines-turns 2000 350 1100 900 4.2 2000 4 5.7 AM05501J8H 5 AM04102JRH *2 Outside dimension D mm W mm 0.7B1p - 155T 33.0 19.0 140 0.9B1p - 102T 33.0 19.5 1500 230 0.85B1p - 116T 34.0 26.0 1100 800 150 0.9B1p - 84T 32.5 25.5 7.1 600 500 80 1.1B1p - 65T 33.0 28.0 4 5.7 1200 1000 160 1.0B1p - 100T 40.5 26.5 AM05751JRH 5 7.1 890 750 110 1.1B1p - 85T 40.5 27.0 AM05901JAH 5 7.1 1000 900 115 1.1B1p - 81T 40.5 32.0 AM06651JAH 6 8.5 740 650 87 1.2B1p - 69T 41.0 32.5 AM05122JBH 5 7.1 1500 1200 140 1.1B1p - 92T 45.5 31.5 AM06801JBH 6 8.5 970 800 94 1.2B1p - 75T 45.0 30.5 AM08501JBH 8 11.3 600 500 53 1.0B2p - 59T 46.5 32.0 AM08801JCH 8 11.3 1000 800 73 1.0B2p - 72T 56.0 33.5 AM10501JCH 10 14.1 600 500 45 1.1B2p - 56T 54.5 32.5 AM12351JCH 12 17.0 420 350 33 1.2B2p - 47T 55.0 32.0 AM10651JKH 10 14.1 840 650 53 1.1B2p - 61T 56.0 38.0 AM12451JKH 12 17.0 590 450 41 1.2B2p - 51T 55.5 38.0 AM15301JKH 15 21.2 380 300 26 1.1B3p - 41T 55.5 38.0 AM12701JLH 12 17.0 860 700 53 1.2B2p - 61T 72.5 39.0 AM15451JLH 15 21.2 550 450 35 1.1B3p - 49T 72.0 40.0 AM20251JLH 20 28.3 310 250 20 1.1B4p - 37T 72.5 39.0 *1 Rated inductance tolerance : P25%, the inductance at current 0[A] indicates the reference value. *2 The number of turns indicates the reference value. The specification of the inductance takes precedence over that of the number of turns. The coils of the lying type are also provided for all the items listed in the table above. For a coil of the type, symbol E should be added to the end of the part number shown in the table (e.g. AM05901JAE). The coils of the pedestal attachment type are also provided for the items with symbol @ in the table above. For a coil of the type, symbol D should be added to the end of the part number shown in the table (e.g. AM05901JAD). The items preceded by symbol include two types, or the depth type with pedestal and the bed type with pedestal. To order the item of the depth or bed type, add D or B at the end of the item of the item name respectively, as shown in the examples below:(AM05901JAD for the depth type with pedestal) (AM05901JAB for the bed type with pedestal) *Order the auxiliary pins separately if they are required for the pedestal. (1/2) CAT. No. E1008D AMORPHOUS CHOKE COILS ?Temperature dependence ?Inductance-Frequency @AM choke @Frequency : 100 kHz, AM choke ?dc-current pre-loadability (1) <Example> ?dc-current pre-loadability (2) <Example> @Core : C251510J3, C251515J2, C322015J2, Frequency : 100 kHz @Core : C322020J2, C372320J2, C462720J2, Frequency : 100 kHz ?dc-current pre-loadability (3) <Example> ?dc-current pre-loadability (4) <Example> @Core : C462720J2, C462725J2, Frequency : 100 kHz @Core : C462725J2, C603525J2, Frequency : 100 kHz (2/2) CAT. No. E1008D