3M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets 3MTM Electronic Specialty Markets - New Product Releases 3MTM Abrasives 3MTM Adhesives, Cleaners & Compounds 3MTM Breadboards & Test Clips 3MTM Cable & Assemblies 3MTM Copper Interconnects 3MTM Fiber Optics 3MTM Fire Protection 3MTM Heat Shrink 3MTM Identification Systems 3MTM Occupational Health & Safety Products 3MTM Protective Bumpers 3MTM Reclosable Fasteners 3MTM Splicing, Terminating & Ducting 3MTM Static Control 3MTM Tapes 3MTM Terminals, Kits & Tools 3MTM Vacuums & Accessories 3MTM Warehousing & Packaging Supplies 3MTM Wire Connectors Other Tools What's New Sales Contacts U.S. Distributors Product Catalog for Electronic Specialty Markets 3MTM Terminals, Kits & Tools Disconnects HighlandTM Male Disconnects - Non-Insulated Butted Seam Printer-friendly format 3MTM HighlandTM Non-Insulated Male Tab MT18-187L, 22-18 AWG This terminal has a wire range of 22-18 and a stud size of .187. It has case quantities of 10 bags per case. GTIN(UPC/EAN) : 0 00 54007 70307 5 3M Id : 80-6105-8820-6 Additional Information Attached to mating part by tongue slipping over male tab. Use of dents and rolled edges on female part provides excellent holding force while allowing easy and quick disconnect. Learn More . . . Packaging Data Highland Male Tabs - Non-Insulated - Product Selection Guide (PDF 7.8 K) Highland Terminals MT10-250, MT14-250, MT18-250 Data Sheet (PDF 18.8 K) Highland Terminals MT14-187, MT18-187 - Data Sheet (PDF 18.7 K) Terminal Stud Size Chart - Product Selection Guide (PDF 5.2 K) Please Note: Adobe(R) Acrobat(R) Reader is required to view PDF documents. Characteristics Agency Approvals UL and CSA Barrel Style Butted China RoHS - Below MCV Yes CSA File Number LR22190 EU RoHS Compliant Yes Fastener Orientation Male Pad Width 0.187 Inch Terminal Style Standard Terminal Type Disconnect UL File Number E70512 18 to 22 American Wire Gauge (AWG) Wire Gauge Range HighlandTM Terminals MT14-187, MT18-187 L Male Disconnect, Non-Insulated, Butted Seam Data Sheet Product Number Wire Range (AWG) Mates with Male Tab Width (W' ) x Thickness L Barrel Length Barrel I.D. MT14-187 16-14 0.187 x 0.020 0.64 0.24 0.080 MT18-187 22-18 0.187 x 0.020 0.64 0.24 0.080 Installation Information WARNING Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. UNDERWRITERS LABORATORIES STANDARD NO. UL 310 3M FILE NO. E70512 CANADIAN STANDARDS ASSOCIATION STANDARD NO. C22.2 NO. 153 3M FILE NO. LR22190 UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Specifications Wire Size: Barrel Seam: Maximum Voltage Rating: Maximum Current: Terminal Material: Plating: See Table Above Butted 600 V Building Wire 1000 V Signs or Fixtures (luminaires) Same as Wire ETP Copper Tin Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style), or TR-490 (ratchet style) hand tools. Barrel Crimp (required) Suitable for factory application on steel or brass tabs UL or CSA. Suitable for field application on brass tabs, strain relief required, UL only. Engineering Specification Crimp-Type Male Quick Disconnect shall, electrically and mechanically connect permanently to a prestripped end of a stranded copper wire: and have a flat rectangular tongue portion for mating to a Female Quick Disconnect in a separable, reusable manner, forming a Quick Connect Wiring Connection. The connector line shall offer tongue variations (size 0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA DC2) and barrel variations in wire size 22-18 AWG, 16-14 AWG, 12-10 AWG and construction of non-insulated, vinyl insulated, nylon fully insulated etc... The Male Quick Disconnect shall be tin plated 0.020 thick copper, with a 0.187 blade conforming to ANSI/NEMA DC-2 dimensions and a 0.24 long barrel and sized for a specified (AWG) wire range (22-18, 16-14). Insulated connectors shall be UL Listed and CSA Certified for 600 volts maximum, building wire: 1000 volts maximum, signs and fixtures (luminaires). Quick Disconnect connectors shall be suitable for field or factory wiring, with a UL Recognized strain relief required. The Quick Disconnect shall have regulatory agency coverage (UL Listing, CSA Certification). The tongue shall be marked with the wire range and the manufacturer's symbol.() 3M and Scotchlok are trademarks of 3M IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 http://www.3M.com/elpd Litho in USA. (c) 3M 2002 78-8126-0647-9-A