3M Worldwide : United States : Electronics Manufacturing
Solutions for Electronic
Specialty Markets
(ESM)
Product Catalog
for Electronic Specialty
Markets
3M™ Electronic
Specialty Markets - New
Product Releases
3M™ Abrasives
3M™ Adhesives,
Cleaners & Compounds
3M™ Breadboards &
Test Clips
3M™ Cable &
Assemblies
3M™ Copper
Interconnects
3M™ Fiber Optics
3M™ Fire Protection
3M™ Heat Shrink
3M™ Identification
Systems
3M™ Occupational
Health & Safety
Products
3M™ Protective
Bumpers
3M™ Reclosable
Fasteners
3M™ Splicing,
Terminating & Ducting
3M™ Static Control
3M™ Tapes
3M™ Terminals, Kits &
Tools
3M™ Vacuums &
Accessories
3M™ Warehousing &
Packaging Supplies
3M™ Wire Connectors
Other Tools
What's New
Sales Contacts
U.S. Distributors
Product Catalog for Electronic Specialty Markets 3M™ Terminals, Kits & Tools Disconnects Highland™
Male Disconnects - Non-Insulated Butted Seam
Printer-friendly format 3M™ Highland™ Non-Insulated Male Tab MT18-187L,
22-18 AWG
This terminal has a wire range of 22-18 and a stud size of .187. It has case quantities
of 10 bags per case.
GTIN(UPC/EAN) : 0 00 54007 70307 5
3M Id : 80-6105-8820-6
Additional Information
Learn More . . .
Packaging Data
Highland Male Tabs - Non-Insulated - Product Selection
Guide (PDF 7.8 K)
Highland Terminals MT10-250, MT14-250, MT18-250 -
Data Sheet (PDF 18.8 K)
Highland Terminals MT14-187, MT18-187 - Data Sheet
(PDF 18.7 K)
Terminal Stud Size Chart - Product Selection Guide (PDF
5.2 K)
Please Note:
Adobe® Acrobat® Reader is required to view PDF documents.
Attached to mating part by
tongue slipping over male tab.
Use of dents and rolled edges
on female part provides
excellent holding force while
allowing easy and quick
disconnect.
Characteristics
Agency Approvals UL and CSA
Barrel Style Butted
China RoHS - Below MCV Yes
CSA File Number LR22190
EU RoHS Compliant Yes
Fastener Orientation Male
Pad Width 0.187 Inch
Terminal Style Standard
Terminal Type Disconnect
UL File Number E70512
Wire Gauge Range 18 to 22 American Wire Gauge
(AWG)
HighlandTerminals
MT14-187, MT18-187
Male Disconnect, Non-Insulated, Butted Seam
Data Sheet
Specifications
Wire Size: See Table Above
Barrel Seam: Butted
Maximum Voltage Rating: 600 V Building Wire
1000 V Signs or
Fixtures (luminaires)
Maximum Current: Same as Wire
Terminal Material: ETP Copper
Plating: Tin
Installation Information
UL Listed and CSA Certified for use on stranded copper
(AWG) wire only.
Strip away the end 3/8 inch of wire insulation.
Make the crimp in the proper station of a recommended
3M crimp tool: TH-440, TH-450 (scissor style), or
TR-490 (ratchet style) hand tools.
L
Suitable for factory application on steel or brass tabs UL
or CSA.
Suitable for field application on brass tabs, strain relief
required, UL only.
Barrel Crimp (required)
UNDERWRITERS
LABORATORIES
STANDARD NO. UL 310
3M FILE NO. E70512
CANADIAN STANDARDS
ASSOCIATION
STANDARD NO. C22.2
NO. 153
3M FILE NO. LR22190
WARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electr ical codes.
tcudorP rebmuN egnaReriW )GWA( baTelaMhtiwsetaM W(htdiW' ssenkcihTx)L
lerraB htgneL lerraB .D.I
781-41TM41-61020.0x781.046.042.0080.0
781-81TM81-22020.0x781.046.042.0080.0
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd Litho in USA.
© 3M 2002 78-8126-0647-9-A
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
3M and Scotchlok are trademarks of 3M
Engineering Specification
Crimp-Type Male Quick Disconnect shall, electrically
and mechanically connect permanently to a
prestripped end of a stranded copper wire: and have a
flat rectangular tongue portion for mating to a Female
Quick Disconnect in a separable, reusable manner,
forming a Quick Connect Wiring Connection.
The connector line shall offer tongue variations (size
0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA DC-
2) and barrel variations in wire size 22-18 AWG, 16-14
AWG, 12-10 AWG and construction of non-insulated,
vinyl insulated, nylon fully insulated etc...
The Quick Disconnect shall have regulatory agency
coverage (UL Listing, CSA Certification). The tongue
shall be marked with the wire range and the
manufacturer’s symbol.()
The Male Quick Disconnect shall be tin plated 0.020˝
thick copper, with a 0.187˝ blade conforming to
ANSI/NEMA DC-2 dimensions and a 0.24˝ long
barrel and sized for a specified (AWG) wire range
(22-18, 16-14).
Insulated connectors shall be UL Listed and CSA
Certified for 600 volts maximum, building wire: 1000
volts maximum, signs and fixtures (luminaires).
Quick Disconnect connectors shall be suitable for field
or factory wiring, with a UL Recognized strain relief
required.