CM-BF527
The CM-BF527 is optimized for performance and functionality. The module integrates processor, RAM, ash, external peripheral
controllers and power supply at a size of 31.5x36.5mm! It is based on the high performance ADSP-BF527 from Analog Devices.
The Core Module is designed for commercial usage (commercial temperature range). It addresses up to 64MByte SDRAM via its
16bit wide SDRAM bus and has an onboard NOR-ash of 8MByte. The processor features a built in USB-OTG 2.0 unit and has the
physical Ethernet transceiver onboard.
Features
Development Support
» EVAL-BF5xx Evaluation Board
» DEV-BF5xx Development Board
» DEV-BF5xxDA-Lite Development Board
» BLACKSheep® OS
» uClinux Port available
Blackn® Core Module
Applications
» Mobile Embedded Device
» Network connected embedded system
» Industrial control
» Voice over IP (VoIP)
» Multi-media application processor
» Multi-media accessories - e.g. docks
» Networked audio
» Instrumentation
» Imaging
Lainzerstraße 162/3
1130 Wien, Austria
www.bluetechnix.com
Tel.:
Fax.:
Email:
BLUETECHNIX Mechatronische systeMe GMBh
+43 (1) 9142091 x 0
+43 (1) 9142091 x 99
oce@bluetechnix.at
CPU Analog Devices BF527 @ 600MHz
RAM* 32/64MByte SDRAM up to 133MHz
FLASH 8MByte
INTERFACES
ETHERNET 1x10/100 Mbit Ethernet
PPI 1
SPI 1
SPORT 2
TWI/I2C1
UART 2
USB 2.0 1 (OTG)
ADDITIONAL
FEATURES
Single 3.3V supply voltage
On-board core voltage regulator
Low voltage reset circuit
NAND Flash Interface
TEMP. RANGE 0°C to +70°C
VERSIONS Connector
DIMENSIONS 31x36mm
* depends on version - see ordering information
Order No. Info
100-1253-2 CM-BF527-C-C-Q50S32F8 (CM-BF527)
100-1254-2 CM-BF527-C-C-Q50S64F8 (CM-BF527-64SD)
Ordering Information
