73 12 " 10 NOTES: 1. MATERIALS: Oo ue WwW - PART NUMBER DATE CODE 38.00 REF P 22.45 +| 0.48 REF |-- |- 0.48 REF 4.00 CONNECTOR HOUSING: HIGH TEMPERATURE THERMOPLASTIC GLASS FILLED, UL 94V-0 EMI CAGE: NICKEL SILVER ALLOY EMI FINGERS: COPPER ALLOY TERMINALS: COPPER ALLOY 1 2. FINISHES: EMI FINGERS: 0.504M MIN NICKEL CONTACT AREA: 0.764M MIN GOLD OVER 2.544M MIN NICKEL TAIL AREA: 0.764M - 1.524M TIN OVER 2.544 MIN NICKEL . PRODUCT SPECIFICATION: PS-76866-001 . PACKAGING SPECIFICATION: PK-76866-001 . MATES WITH: MOLEX CABLE SERIES 111068 & 111073 . RECOMMENDED MOUNTING HARDWARE: REFER TO APPLICATION SPECIFICATION AS-76866-001 7. PLUG MODULE PCB LAYOUT REFER TO SD-76866-9900 SECTION Z-Z DIMENSION STYLE 2S=) Jauauity) GENERAL TOLERANCES SCALE | DESIGN UNITS THIRD. ANGLE S83) |sympos| (UNLESS SPECIFIED) MM ONLY 2:1 METRIC | CleRoECTION ees mm INCH __| DRAWN BY DATE |TITLE SRL ZIH-0 [ZPLACES|E--- _[f-- KLANG 2009/04/21 IPASS PLUS HD HAzZe |o 3 PLACES] --- _[+--- [CHECKED BY DATE 1X2 ASSY PeSotaisiW/-0 [2 PLAces[+O13 [#--- |TMCCLELLAND 2010/01/14 on Sa 1 PLACE [0.25 |L-- |APPROVED BY DATE 23359" ANGULAR V/2MBANAKIS 2010/04/14 fol MOLEX INCORPORATED a S = Ss eZ MATERIAL NO, DOCUMENT NO. SHEET NO. DoOeTe DRAFT WHERE APPLICABLE] 76866-0015 SD-76866-005 1 OF 6 OU WITCH DIMEN s [S22 [THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX @ INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| Rev. E 2006/04/15 12 " 10 O _ I | 6 5 } 3 2 } 1173 12 "1 | 10 | 9 | 8 | PCB EDGE NOTES: 3.50 REF LATCH ACTIVATION ZONE 3.00 REF 1, CONNECTOR KEEPOUT AREA PCI a 0.86 REF ADD-IN CARD 1/0 BRACKET CONNECTOR ASSEMBLY ASSEMBLED VIEW PCI] ADD-IN CARD APPLICATION 1/0 BRACKET 0 | section 22.90+0.10 | L 12.07 +0.10 RO.75MAX K 17.10 | A y Ny - - 0.38 REF 0.03 Ne == 7 23.00 MIN SEE NOTE 1 I/O BRACKET CUT OUT (BRACKET NOT INCLUDED) || K-K 19.00+0.15 es = GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE PCI ADD-IN CARD APPLICATIONS S33] |ymso.s| (UNLESS SPECIFIED) MM ONLY 21 | metric |OCI ERR ANG elses mm INCH | DRAWN BY DATE | TLE S2R2]ZINY-0 [TPAces-- |= KLANG 2009/04/21 IPASS PLUS HD whee {Ek 3 PLACES|t --- |+--- [CHECKED BY DATE 1X2 ASSY BeSaaisiW/-0 [2 PLAces[+073 [#--- |TMCCLELLAND 2010/01/14 We, a oye 1 PLACE [0.25 |- APPROVED BY DATE TS 3og ANGULAR V/2MBANAKIS 2010/04/14 fol MOLEX INCORPORATED ur SEzez A Ss SAK MATERIAL NO, DOCUMENT NO. SHEET NO, Wz Soe DRAFT WHERE APPLICABLE| SEE SHEET 1 SD-76866-005 2 OF 6 ADAG WITT DIMERS _[S2=[ THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| Rev. E 2006/04/15 O _ I "1 10 9 8 | 6 4 3 2 | 173 12 | | 3.50 REF LATCH ACTIVATION ZONE 3.00 REF PANEL PCB EDGE J NOTES: 1. CONNECTOR KEEPOUT AREA ALL OTHER (M/B) CONNECTOR ASSEMBLY PCB (M/B) 20.08 REF ASSEMBLED VIEW 32.69 MIN SEE NOTE 1 h 18.19 + 23.00 MIN SEE NOTE 1 20.08 20.15 PCB TO BRACKET VIEW APPLICA TIONS 22.90 20.10 ILLUSTRATION OF ALL OTHER M/B BRACKET APPLICATION 12.07 +0.10 7 L RO.75MAX 2 [ 0.38 +0.10 | j /Q BRACKET CUT OUT (BRACKET NOT SUPPLIED) DIMENSION STYLE DESIGN UNITS =S=) Jauauity| GENERAL TOLERANCES SCALE | THIRD. ANGLE S83) |sympois| (UNLESS SPECIFIED) MM ONLY 2:1 METRIC | CleRoECTION elses mm INCH | DRAWN BY DATE | TLE 8 RRR ZW -0 [PLACES|E--- [E--- KLANG 2009/04/21 IPASS PLUS HD vine? |k 3 PLACES|t--- |4--- CHECKED BY DATE 1X2 ASSY Be saale|/W~O [2 Places[to13 _[+--- [MCCLELLAND 2010/04/14 Wo soe 1 PLACE [0.25 |t--~ [APPROVED BY DATE BOSSE |W Guan eiz= MBAS 2010/0174] (lex MOLEX INCORPORATED 5 = Ss eZ MATERIAL NO, DOCUMENT NO. SHEET NO, Wz Soe DRAFT WHERE APPLICABLE] SEE SHEET 1 SD-76866-005 3 OF 6 ADAG WITCH? DIMEN s _[S2=[ THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX DS | INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| Rev. F 2009/06/18 10 6 4 3 2 | 1~ 73 12 "1 | 10 | 9 8 7 | 6 | 5 | 4 | 3 | 2 1 __| B31 370) I __ $0.57 +0.05PTH [@] 0.05]c[BlAl SEE NOTE 5 _ + O70 L 70) ~] oo o 1.40] + 0.87 +| e@.0@ .e@ .e 9 0.37 +0.05PTH 1:30 ~ L % % % % gi } teas [1 0.05/c[BIAl 1) e* o o* o 71.00 A, @ YY e e : / 0.60 o 0 e e 09 eo e wo 11.00 22.00 Hy Ff SEE DETAIL Y 22.00] e | % 6 cle 750 "6 | ex DETAIL Y SCALE 10:1 a [2] 2.50 $2.20+0.10PTH 1.40) = [}] 0.10[C[B)A] 7.60] + $3.80 +0,10 7 rr |__ NOTES: 1. RECOMMENDED DRILL SIZE AND ANNULAR RING FOR A 0.37 FINISHED offs DIMENSION STYLE SCALE DESIGN UNITS PTH - REFER TO APPLICATION SPECIFICATION AS-76866-001 sss SyyBOLS UNLESS SPECED) MM ONLY 4A | METRIC |OC) CRE CH OMe 2, MINIMUM RECOMMENDED SPACING: 25.00MM onns Ta | INCH] ORARN BY SME THE 3. MINMUM PCB THICKNESS: 157MM BARS z W-0 [-PrAcES|E-[e--___ KLANG 2009/04/21 PASS, rus HD . RECOMMENDED DRILL SIZE AND ANNULAR RING FOR A 0.57% FINISHED ees ie W-0 3 PLACES i= = CECED EY oe VM PTH - REFER TO APPLICATION SPECIFICATION AS-76866-001 We Sool TPLACE [0.25 [E--= [PPROVED BY DATE MOLEX INCORPORATED 5. CAGE STAND OFF AREA, NO TRACES ON SURFACE OF PCB HSE ANGULAR 1/2_MBANAKIS 2010/04/14] NOT o SG e MATERIAL NO, DOCUMENT NO. SHEET NO, IN THESE AREAS eee DRAFT WHERE APPLICABLE] SEE SHEET 1 SD-76866-005 4 OF 6 Ww OU =| _ WITHIN? Ones SZE| THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX D5 wy C INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_f __C_P_AM_T| th-frame_ FAM. 12 1" 40 9 8 | 7 | 6 5 4 3 2 | 4cr] 12 "1 10 | 9 | 8 | 7 | 6 | 5 | 4 3 | 2 1 RECOMMENDED INSERTION TOOL KEEP OUT AREA NO COMPONENTS IN THIS AREA MORE THAN 7.50 mm TALL 7 23.00 [ 3.00 vee ete | | | ffe tle Sie Fife SFP | p fate o ep o ee b Q q RECOMMENDED EXTRACTION TOOL KEEP OUT AREA 5 NO COMPONENTS IN THESE AREAS 2,50 ese QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS THIRD ANGLE S83) |sympois| (UNLESS SPECIFIED) MM ONLY 2:1 METRIC | CleRoECTION efes mm INCH __| DRAWN BY DATE TITLE SSR Rz1G7=-0 [ZPLACES|E--- | #--- KLANG 2009/04/24 IPASS PLUS HD SS |E +--- |+--- CHECKED BY DATE 1X2 ASSY wee Ib 3 PLACES |+ + PSoaale|WO [2 eraces[o13_[4--- _|TMCCLELLAND 2010/04/14 We, a oye 1 PLACE [0.25 |- APPROVED BY DATE 52 See W/O ANGULAR 1/2 BANAKIS 2010/04/44 rKoldx MOLEX INCORPORATED S = Se MATERIAL NO. DOCUMENT NO. SHEET NO. Wo eee DRAFT WHERE APPLICABLE] SEE SHEET 1 SD-76866-005 5 OF 6 ADAG WITCH? DIMEN s _[S2=[ THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX D5 |f INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION {p-frame 70ers. 12 " 10 9 8 7 6 5 4 3 2 | 1 Rev. F 2009/06/18a 2 " 10 9 8 7 6 5 4 3 2 1 @o1 Orn @p7 @o1 Oe @07 os @pe @s 53, @v @s @oD2 05 bs @o02 D5 b38 @u1 _@c4_@c7 @u1. c4_ 7 os @ce_ Oro 3 Ox @cs @2 oe @ 2 @c8 @s1 oo OF @s1 Oe. @s7 @53 @p6 _@p9 os @86 on @82 Oss @s8 @s2 Ose @s8 61 On, "6 @a1_@a4_A7 v6 Gas @s, @% Or @A2 ee oe @Az2 OAS OAs es = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS THIR NGLE S83) |sympos| (UNLESS SPECIFIED) MM ONLY 8:1 METRIC Oc ERR OJE A ION eww DRAWN BY DATE TITLE SRER z\W-0 [ZPLACES = MS LANG 2009/04/21 IPASS PLUS HD AzZe |g 3 PLACES|--- _[-=> _ |CHECKED BY DATE 1X2 ASSY BeSaaisiW/-0 [2 PLAces[+073 [#--- |TMCCLELLAND 2010/01/14 We, a oye 1 PLACE [0.25 |- APPROVED BY DATE PSsegr ANGULAR V/2MBANAKIS 2010/04/14 rKoldx MOLEX INCORPORATED 5S = Ss eZ MATERIAL NO. DOCUMENT NO. SHEET NO. We 2S DRAFT WHERE APPLICABLE| SEE SHEET 1 SD-76866-005 6 OF 6 ADAG WITCH DIMEN s _[S2=[ THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX D5 (|g INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION {p-frame aoe. 12 " 10 9 8 | 7 | 6 5 4 3 2 | 1 Rev. E 2006/04/15