RADIAL LEAD ALUMINUM ELECTROLYTIC CAPACITORS KXW SERIES 105 2000 hours, Miniaturized RoHS compliance SPECIFICATIONS Items Characteristics Category Temperature Range -25105 Rated Voltage Range 200450Vdc Capacitance Tolerance 20 20 120Hz I3 CV (After 5 minutes application of rated voltage) Leakage Current(MAX) ILeakage Current(A) Dissipation Factor(MAX) (tan) Rated Voltage (Vdc) tan CCapacitance(F) 200 400 420450 0.12 0.15 0.20 VRated Voltage(Vdc) 20 120Hz After applying rated voltage with rated ripple current for 2000 hours at 105, the capacitors shall meet the following requirements. Endurance Low Temperature Stability Impedance Ratio(MAX) Capacitance Change Within 20 of the initial value. Dissipation Factor Not more than 200 of the specified value. Leakage Current Not more than the specified value. Rated Voltage (Vdc) Z -25 /Z 20 200 400450 3 8 120Hz MULTIPLIER FOR RIPPLE CURRENT Frequency Hz Coefficient 6050 120 500 1k 10k 200Vdc 0.80 1.00 1.20 1.30 1.40 400450Vdc 0.80 1.00 1.25 1.40 1.50 OPTION Code PET Sleeve EFC PART NUMBER KXW M DxL Rated Voltage Series Capacitance Capacitance Tolerance Option Lead Forming Case Size KXW RADIAL LEAD ALUMINUM ELECTROLYTIC CAPACITORS KXW DIMENSIONS (mm) SLEEVE(PET) 0.5 d F D L+ MAX 15MIN 12.5 14.5 16 d 0.6 0.8 F 5.0 7.5 D+0.5MAX 4MIN 10 18 2.0 STANDARD SIZE Rated Voltage Capacitance F Vdc 200 400 Size DxL Rated Ripple Current (A r.m.s./105,120Hz) 82 10x30 0.40 100 10x35 120 Rated Voltage Capacitance F Vdc Size DxL Rated Ripple Current (A r.m.s./105,120Hz) 22 10x30 0.20 0.46 27 10x35 0.23 10x40 0.53 33 10x40 0.27 150 12.5x30 0.62 39 12.5x30 0.31 180 12.5x35 0.70 47 12.5x35 0.36 220 12.5x40 0.80 56 12.5x40 0.43 220 14.5x30 0.80 56 14.5x30 0.43 68 14.5x35 0.51 420 270 14.5x35 0.87 270 16x30 0.87 68 16x30 0.51 330 16x35 1.01 82 14.5x40 0.57 330 18x30 1.01 82 16x35 0.57 390 16x40 1.13 100 16x40 0.61 390 18x35 1.13 100 18x30 0.61 470 18x40 1.27 120 18x35 0.66 560 18x45 1.39 150 18x40 0.71 27 10x30 0.24 18 10x30 0.18 33 10x35 0.28 22 10x35 0.21 39 10x40 0.32 27 10x40 0.25 47 12.5x30 0.37 33 12.5x30 0.28 56 12.5x35 0.42 39 12.5x35 0.32 68 12.5x40 0.48 47 12.5x40 0.38 68 14.5x30 0.48 47 14.5x30 0.38 82 14.5x35 0.52 56 14.5x35 0.44 100 14.5x40 0.58 56 16x30 0.44 100 16x30 0.58 68 14.5x40 0.49 120 16x35 0.67 68 16x35 0.49 120 18x30 0.67 82 16x40 0.55 150 16x40 0.77 82 18x30 0.55 150 18x35 0.77 100 18x35 0.65 180 18x40 0.88 120 18x40 0.74 220 18x45 1.00 150 18x45 0.80 450