AZ6951 SENSITIVE SUBMINIATURE RELAY FEATURES * Extremely small footprint utilizing only 0.18 square inch of PCB area * Thin vertical profile only 0.25" wide * 1 Form A contact with up to 5 Amp switching capability * High sensitivity, 100 mW pickup * Dielectric strength 3000 Vrms contact to coil * Coils to 24 VDC * Epoxy sealed for automatic wave soldering and cleaning * UL/CUR File E43203 CONTACTS GENERAL DATA Arrangement SPST- N.O. (1 Form A) Ratings Resistive load: UL Ratings Material Resistance Max. switched power: 150 W or 1250 VA Max. switched current: 5 A Max. switched voltage: 30 VDC or 250 VAC 5 A at 30 VDC resistive 5 A at 250 VAC resistive Options: Silver tin oxide Silver tin oxide with gold plating < 100 milliohms initially (6 V, 1 A, voltage drop method) COIL Power Life Expectancy Mechanical Electrical Minimum operations 20 million operations 1 X 105 at 5 A, 30 VDC or 250 VAC Res. Operate Time (typical) 6 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 750 Vrms between open contacts (at sea level for 1 min.) 3000 Vrms contact to coil Insulation Resistance 1000 megohms min. at 20C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40C (-40F) to 70C (158F) -40C (-40F) to 105C (221F) Vibration 0.062" DA at 10-55 Hz At Pickup Voltage (typical) 100 mW Shock 10 g Max. Continuous Dissipation 550 mW at 20C (68F) ambient 420 mW at 40C (104F) ambient Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Temperature Rise 25C (45F) at nominal coil voltage Max. Solder Temp. 270C (518F) Max. Solder Time 5 seconds Max. Solvent Temp. 80C (176F) Max. Immersion Time 30 seconds Weight 3 grams Temperature Max. 105C (221F) NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice. 7/16/08 W AZ6951 RELAY ORDERING DATA ORDER NUMBER* COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 6.5 6 7.8 Coil Resistance 10% 125 Must Operate VDC 3.5 1 Form A (SPST- N.O.) AZ6951-5 180 4.2 AZ6951-6 9 11.7 405 6.3 AZ6951-9 12 15.6 720 8.4 AZ6951-12 18 23.4 1,620 12.6 AZ6951-18 24 31.2 2,880 16.8 AZ6951-24 * Add suffix "G" for gold plated contacts 0.02 0.689 [0.50] [17.50] 0.252 [6.40] [5.08] 0.2 MECHANICAL DATA [2.54] [7.62] [5.08] 0.488 0.2 [12.40] 0.3 0.138 0.1 [3.50] 0.044 [1.13] 0.012 0.02 0.031 [0.50] [0.80] PC BOARD LAYOUT [0.30] WIRING DIAGRAM .043 (1.1) DIA 13 0.2 (5.08) 0.2 (5.08) 0.3 (7.62) 0.1 (2.54) Viewed toward terminals 7 5 1 Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: .010" 7/16/08 W