REVISION M USB-A-S-X-X-SM1-X-XX DO NOT SCALE FROM THIS PRINT T&R OPTION -TR: TAPE AND REEL TYPE -A DESIGNED & DIMENSIONED IN MILLIMETERS CONFIGURATION -S: SINGLE C4 PLATING SPECIFICATION -F: GOLD FLASH ON MATING AREA MATTE TIN ON TAILS -S: .000030 GOLD ON MATING AREA MATTE TIN ON TAILS POS 1 E&I OPTION -R: RoHS COMPLIANT RA TERMINATION -SM1: SURFACE MOUNT COLOR -B: BLACK -W: WHITE POS 4 C6 0.81 0.10 [.032 0.004] 0.100.10 .004.004 5.70 0.15 [.224 .006] M 0.600.25 .024.010 C5 C2 11.680.20 .460.008 13.900.25 .547.010 7.000.15 .276.006 C1 C3 3.450.25 .136.010 2.000.08 .079.003 14.100.25 .555.010 2.00 .079 7.00 .276 1.00 .039 (TYP) 1.00 .039 (2 PLCS) 2.00 .079 (TYP) M 2.20 .087 (TYP) 4.50 .177 M 13.200.15 .520.006 3.90 .154 1.40 .055 0.80 .031 (TYP) 12.90 .508 PCB EDGE 1.20 .047 (TYP) 4.50 .177 FIG. 1 RECOMMENDED PCB LAYOUT DECIMALS .X: .15 [.006] .XX: .08 [.003] .XXX: .03 [.001] NOTES: C6 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MM. TOLERANCES ARE: 1. C1 REPRESENTS A CRITICAL DIMENSION. 2. VERIFY -S PLATING, VISUALLY CHECK FOR -F GOLD. 3. ALL PARTS ARE RoHS COMPLIANT WITH OR WITHOUT -R. F:\DWG\MISC\MKTG\USB-A-S-X-X-SM1-X-XX-MKT.SLDDRW MATERIAL: ANGLES 2 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING INSULATOR: PBT (RATED UL 94V-0) CONTACT: PHOS BRONZE BACK SHIELD: NICKEL PLATED PHOS BRONZE FRONT SHIELD: TIN PLATED PHOS BRONZE MAX FLASH ALLOWED: .051[.0020] MAX GATE VESTIGE: .051[.0020] SHEET SCALE: 3:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: DWG. NO. USB A, SINGLE, SURFACE MOUNT USB-A-S-X-X-SM1-X-XX BY: B. COOPER 2/6/2007 SHEET 1 OF 1