2SD1684T - ON Semiconductor L.L.C.

SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft’s

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

PNP/NPN Epitaxial Planar Silicon Transistors

100V/1.5A Switching Applications

Ordering number:2041A

2SB1144/2SD1684

92098HA (KT)/10996TS (KOTO) 8-8500/4107KI/6106AT, TS No.2041–1/4

retemaraPlobmySsnoitidnoCsgnitaRtinU

egatloVesaB-ot-rotcelloCV

OBC 021)–(V

egatloVrettimE-ot-rotcelloCV

OEC 001)–(V

egatloVesaB-ot-rettimEV

OBE 6)–(V

tnerruCrotcelloCI

C5.1)–(A

)esluP(tnerruCrotcelloCI

PC 0.2)–(A

noitapissiDrotcelloCP

C5.1W

01W

erutarepmeTnoitcnuJjT 051

erutarepmeTegarotSgtsT 051+ot55–

( ) : 2SB1144

Specifications

Absolute Maximum Ratings at Ta = 25˚C

Package Dimensions

unit:mm

2042B [2SB1144/2SD1684]

Features

· Adoption of FBET and MBIT processes.

· High breakdown voltage.

· Low saturation voltage.

· Plastic-covered heat sink facilitating high-density

mounting.

˚C

Electrical Characteristics at Ta = 25˚C

1 : Emitter

2 : Collector

3 : Base

SANYO : T O-126ML

Tc=25˚C

retemaraPlobmySsnoitidnoC sgnitaR tinU

nimpytxam

tnerruCffotuCrotcelloCI

OBC VBC I,V001)–(= E0=001)–(An

tnerruCffotuCrettimEI

OBE VBE I,V4)–(= C0=001)–(An

niaGtnerruCCDh

EF 1V

EC I,V5)–(= CAm001)–(= *001*004

hEF 2V

EC I,V5)–(= CA1)–(= 03

tcudorPhtdiwdnaB-niaGf

TVEC I,V01)–(= CAm05)–(= )001(zHM

021zHM

ecnaticapaCtuptuOC

bo VBC zHM1=f,V01)–(=)81(11Fp

* : The 2SB1144/2SD1684 are classified by 100mA hFE as follows :

002Q001082S041004T002

2SB1144/2SD1684

No.2041–2/4

Switching Time T est Circuit

retemaraPlobmySsnoitidnoC sgnitaR tinU

nimpytxam

egatloVnoitarutaSrettimE-ot-rotcelloCV

)tas(EC ICI,Am005)–(= BAm05)–(= )081–()005–(Vm

001003Vm

egatloVnoitarutaSrettimE-ot-esaBV

)tas(EB ICI,Am005)–(= BAm05)–(=58.0)–(2.1)–(V

egatloVnwodkaerBesaB-ot-rotcelloCV

OBC)RB( ICI,Aµ01)–(= E0=021)–(V

egatloVnwodkaerBrettimE-ot-rotcelloCV

OEC)RB( ICR,Am1)–(= EB =∞001)–(V

egatloVnwodkaerBesaB-ot-rettimEV

OBE)RB( IEI,Aµ01)–(= C0=6)–(V

emiTNO-nruTt

no tiucriCtseTdeificepseeS08)08(sn

emiTegarotSt

gts tiucriCtseTdeificepseeS 0001sn

)057(sn

emiTllaFt

ftiucriCtseTdeificepseeS05)04(sn

2SB1144/2SD1684

No.2041–3/4

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer’s

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer’s products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any and all SANYO products described or contained herein fall under strategic

products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of

Japan, such products must not be exported without obtaining export license from the Ministry of

International Trade and Industry in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of September, 1998. Specifications and information herein are

subject to change without notice.

2SB1144/2SD1684

PS No.2041–4/4