PSD-S OE LED ... LED permanent light element, 24 V AC/DC Data sheet 7949_en_01 1 (c) PHOENIX CONTACT 2015-05-04 Description This optical signal element is part of a modular signal tower. According to your requirements, a signal tower may comprise any combination of up to five signal elements. You may use up to five optical signal elements or up to four optical and one audible signal element. An audible signal element can be used as top element only. A bayonet locking system establishes the mechanical and electrical connection between the elements. Connection elements with spring-cage or screw connection can be used for electrical connection of the signal tower. Mounting elements for base or tube mounting can be used to mount the signal tower. Features - - - LED permanent light element for 24 V AC/DC Colors: Red, green, yellow, blue and clear Degree of protection: IP65, when installed or with cover Make sure you always use the latest documentation. It can be downloaded from the product at phoenixcontact.net/products. PSD-S OE LED ... 2 Table of contents 1 Description .............................................................................................................................. 1 2 Table of contents ..................................................................................................................... 2 3 Ordering data .......................................................................................................................... 3 4 Technical data ......................................................................................................................... 3 5 Example of a signal tower........................................................................................................ 4 6 Assembly notes for a signal tower ........................................................................................... 4 7 Assembling the individual elements......................................................................................... 5 8 Example for signal tower dimensions ...................................................................................... 5 7949_en_01 PHOENIX CONTACT 2 PSD-S OE LED ... 3 Ordering data Description Type Order No. Pcs./Pkt. LED permanent light element, 24 V AC/DC, red PSD-S OE LED RD 2700107 1 LED permanent light element, 24 V AC/DC, green PSD-S OE LED GN 2700119 1 LED permanent light element, 24 V AC/DC, yellow PSD-S OE LED YE 2700122 1 LED permanent light element, 24 V AC/DC, clear PSD-S OE LED CL 2700127 1 LED permanent light element, 24 V AC/DC, blue PSD-S OE LED BU 2700131 1 4 Technical data Dimensions (in mm) 65,5 56 O70 Diameter 70 mm Height 65.5 mm General data Material Polycarbonate PC Calotte color : PSD-S OE LED RD red Calotte color : PSD-S OE LED GN green Calotte color : PSD-S OE LED YE yellow Calotte color : PSD-S OE LED CL clear Calotte color : PSD-S OE LED BU blue Weight 58 g Ambient temperature (operation) -30 C ... 50 C Degree of protection IP65, when installed or with cover Mounting position any Connection Rubber seal pre-installed for each element Electrical data Input voltage 24 V AC/DC Inrush current max. 500 mA Current consumption 30 mA Optical signal type Permanent light 7949_en_01 PHOENIX CONTACT 3 PSD-S OE LED ... Electrical data Source of light type LED Service life, electrical max. 100,000 h Operating time 100 % Approvals / conformities Conformance with EMC Directive 2004/108/EC For the latest approvals, please visit phoenixcontact.net/products. 5 Example of a signal tower 6 - - 1 - Assembly notes for a signal tower Only use a maximum of five elements within a signal tower. Use only one audible element in a signal tower and position this element on top. When closing the bayonet locking system, observe the markings (see "Assembling the individual elements"). 2 3 4 Figure 1 Example of a signal tower Key: 1 Audible signal element 2 Optical signal element 3 Connection element 4 Assembly element 7949_en_01 PHOENIX CONTACT 4 PSD-S OE LED ... 7 Assembling the individual elements 8 Example for signal tower dimensions The following figure shows the dimensions of a typical signal tower. 3 1 ON 1 ON 2 2 3 3 1 2 3 56 ON 408 2 4 x 56 (= 224) 1 ON 2 3 1 2 3 86 ON 112 1 ON Figure 2 * * * Assembling the individual elements Select the elements for your application. Connect the elements to be assembled so that the markings are aligned. Turn the upper element in the direction of the arrow. 7949_en_01 O70 Figure 3 Dimensions of a signal tower (example) PHOENIX CONTACT GmbH & Co. KG * 32823 Blomberg * Germany phoenixcontact.com 5