SURFACE MOUNT DISPLAY APSC03-41SEKWA-F01 Features SUPER BRIGHT ORANGE Description 0.3 INCH DIGIT HEIGHT. The Super Bright Orange source color devices are made LOW CURRENT OPERATION. with DH InGaAlP on GaAs substrate Light Emitting Diode. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 1100PCS / REEL. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAF2723 REV NO: V.2 DATE: APR/26/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000146-01 Selection Guide Part No. Dice APSC03-41SEKWA-F01 Iv (ucd) @ 10 mA Lens Type SUPER BRIGHT ORANGE (InGaAlP) WHITE DIFFUSED Min. Typ. 4700 21371 Description Common Cathode, Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Orange D Dominant Wavelength 1/2 Max. Units Test Conditions 610 nm IF=20mA Super Bright Orange 601 nm IF=20mA Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Super Bright Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF2723 REV NO: V.2 DATE: APR/26/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000146-01 Super Bright Orange APSC03-41SEKWA-F01 SPEC NO: DSAF2723 REV NO: V.2 DATE: APR/26/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000146-01 APSC03-41SEKWA-F01 Recommended Soldering Pattern (Units : mm) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAF2723 REV NO: V.2 DATE: APR/26/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000146-01 PACKING & LABEL SPECIFICATIONS APSC03-41SEKWA-F01 Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF2723 REV NO: V.2 DATE: APR/26/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000146-01