For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PHASE SHIFTERS - DIGITAL - SMT
1
HMC934LP5E
v01.1211
400° ANALOG PHASE SHIFTER
1 - 2 GHz
General Description
Features
Functional Diagram
The HMC934LP5E is an Analog Phase Shifter which
is controlled via an analog control voltage from 0 to
+13V. The HMC934LP5E provides a continuously
variable phase shift of 0 to 400 degrees from 1 to 2
GHz, with extremely consistent low insertion loss
versus phase shift and frequency. The high accuracy
HMC934LP5E is monotonic with respect to control
voltage and features a typical low phase error of
+3.5 / -2 degrees. The HMC934LP5E is housed in an
RoHS compliant 5 x 5 mm QFN leadless package.
Octave Bandwidth: 1 to 2 GHz
400° Phase Shift
Low Insertion Loss: 3.5 dB
Low Phase Error: +3.5 / -2 deg
Single Positive Voltage Control
32 Lead 5 x 5 mm QFN Package: 25 mm
Electrical Specications, TA = +25 °C, 50 Ohm System
Typical Applications
The HMC934LP5E is ideal for:
• EW Receivers
• Military Radar
• Test Equipment
• Satellite Communications
• Beam Forming Modules
Parameter Min. Typ. Max. Units
Frequency Range 1 2 GHz
Phase Shift Range 400 deg
Insertion Loss 3.5 dB
Return Loss (input and output) 15 dB
Control Voltage Range 013 V
Control Current Range ±1 mA
Input IP3 30 dBm
Input Power @ -5° Shift In Insertion Phase (Vctl = 0V) 9 dBm
Input Power @ -5° Shift In Insertion Phase (Vctl = 0.5V) 13 dBm
Input Power @ -2° shift In Insertion Phase (Vctl = 13V) 16 dBm
Phase Voltage Sensitivity 32 deg/V
Phase Error (peak) [1] +9 / -5 deg
Phase Error (average) [1] +3.5 / -2 deg
Modulation Bandwidth 6 MHz
Insertion Phase Temperature Sensitivity 0.16 deg/°C
[1] Up to a phase shift of 360 degrees.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PHASE SHIFTERS - DIGITAL - SMT
2
HMC934LP5E
v01.1211
400° ANALOG PHASE SHIFTER
1 - 2 GHz
[1] 0 to 9.5V provides 0 - 360 degrees phase shift range
Insertion Loss vs. Frequency Insertion Loss vs. Vctl , F = 1.5 GHz
-12
-11
-10
-9
-8
-7
-6
-5
-4
-3
-2
-1
0
0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5
0V
0.5V
3V
6V
9V
13V
INSERTION LOSS (dB)
FREQUENCY (GHz)
-6
-5
-4
-3
-2
012345678910111213
+ 25C
+ 85C
- 40C
INSERTION LOSS (dB)
Vctl (Vdc)
Phase Shift vs. Vctl
Phase Shift vs. Frequency
@ Vctl = 6V (Relative to Vctl = 0V)
0
45
90
135
180
225
270
315
360
405
450
495
012345678910111213
1 GHz
1.5 GHz
2 GHz
NORMALIZED PHASE SHIFT (degrees)
Vctl (Vdc)
240
250
260
270
280
290
300
310
320
330
340
350
0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5
+ 25C
+ 85C
- 40C
NORMALIZED PHASE SHIFT (degrees)
FREQUENCY (GHz)
Phase Shift vs. Frequency
(Relative to Vctl = 0V) Vctl = 0 to 13V
Phase Error vs.
Frequency, Fmean = 1.5 GHz [1]
0
45
90
135
180
225
270
315
360
405
450
495
540
0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5
NORMALIZED PHASE SHIFT (degrees)
FREQUENCY (GHz)
1V
13V
-15
-10
-5
0
5
10
1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2
0.5V
2V
4V
6V
8V
9.5V
Average
PHASE ERROR (degrees)
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PHASE SHIFTERS - DIGITAL - SMT
3
HMC934LP5E
v01.1211
400° ANALOG PHASE SHIFTER
1 - 2 GHz
Second Harmonic vs. Vctl, F = 1.5 GHz Third Harmonic vs. Vctl, F = 1.5 GHz
0
10
20
30
40
50
60
70
80
012345678910111213
- 10 dBm
0 dBm
+ 10 dBm
2ND HARMONIC (dBc)
Vctl (Vdc)
0
10
20
30
40
50
60
70
80
012345678910111213
Pin: -10 dBm
Pin: 0 dBm
Pin: +10 dBm
3RD HARMONIC (dBc)
Vctl (Vdc)
Input IP3 vs. Vctl, F = 1.5 GHz Insertion Loss vs. Pin @ 1 GHz
15
20
25
30
35
012345678910111213
- 10 dBm
0 dBm
+ 10 dBm
INPUT IP3 (dBm)
Vctl (Vdc)
-8
-7
-6
-5
-4
-3
-2
-4 -2 0 2 4 6 8 10 12 14 16 18 20
0V
0.5V
6V
13V
INSERTION LOSS (dB)
INPUT POWER (dBm)
Insertion Loss vs. Pin @ 1.5 GHz Insertion Loss vs. Pin @ 2 GHz
-8
-7
-6
-5
-4
-3
-2
-4 -2 0 2 4 6 8 10 12 14 16 18 20
0V
0.5V
6V
13V
INSERTION LOSS (dB)
INPUT POWER (dBm)
-8
-7
-6
-5
-4
-3
-2
-4 -2 0 2 4 6 8 10 12 14 16 18 20
0V
0.5V
6V
13V
INSERTION LOSS (dB)
INPUT POWER (dBm)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PHASE SHIFTERS - DIGITAL - SMT
4
HMC934LP5E
v01.1211
400° ANALOG PHASE SHIFTER
1 - 2 GHz
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Absolute Maximum Ratings
Reliability Information
Frequency Control Voltage (Vctl) -0.5 to +15V
RF Input Power 27 dBm
Storage Temperature -65 to +150 °C
ESD Sensitivity (HBM) Class 1B
Junction Temperature To Maintain
1 Million Hour MTTF 150 °C
Nominal Junction Temperature
(T = 85 °C and Pin = 10 dBm) 87 °C
Thermal Resistance
(Junction To Ground Paddle) 45 °C/W
Operating Temperature -40 to +85 °C
Phase Shift vs. Pin @ 1 GHz Phase Shift vs. Pin @ 1.5 GHz
-8
-7
-6
-5
-4
-3
-2
-1
0
1
-4 -2 0 2 4 6 8 10 12 14 16
0V
0.5V
6V
13V
NORMALIZED PHASE SHIFT (degrees)
INPUT POWER (dBm)
-8
-7
-6
-5
-4
-3
-2
-1
0
1
-4 -2 0 2 4 6 8 10 12 14 16
0V
0.5V
6V
13V
NORMALIZED PHASE SHIFT (degrees)
INPUT POWER (dBm)
Phase Shift vs. Pin @ 2 GHz
Input Return Loss vs.
Frequency, Vctl = 0 to +13V
-12
-11
-10
-9
-8
-7
-6
-5
-4
-3
-2
-1
0
1
-4 -2 0 2 4 6 8 10 12 14 16
0V
0.5V
6V
13V
NORMALIZED PHASE SHIFT (degrees)
INPUT POWER (dBm)
-40
-30
-20
-10
0
0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5
0V
1V
3V
6V
9V
13V
RETURN LOSS (dB)
FREQUENCY (GHz)
Output Return Loss vs.
Frequency, Vctl = 0 to +13V
-40
-30
-20
-10
0
0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5
0V
1V
3V
6V
9V
13V
RETURN LOSS (dB)
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PHASE SHIFTERS - DIGITAL - SMT
5
HMC934LP5E
v01.1211
400° ANALOG PHASE SHIFTER
1 - 2 GHz
Pin Number Function Description Interface Schematic
1 - 5, 8 - 13,
15 - 17, 20 - 32 N/C No connection required. These pins may be connected to RF/DC
ground without affecting performance.
7, 18 GND
Ground: Backside of package has exposed metal ground paddle
that must be connected to ground thru a short path. Vias under
the device are required.
6RFIN This pin is AC coupled and matched to 50 Ohms.
19 RFOUT This pin is AC coupled and matched to 50 Ohms.
14 Vctl
Phase shift control pin. Application of a voltage between 0 and
13 volts causes the transmission phase to change. The DC
equivalent circuit is a series connected diode and resistor.
Pin Descriptions
Outline Drawing
Part Number Package Body Material Lead Finish MSL Rating Package Marking [1]
HMC934LP5E RoHS-Compliant Low Stress Injection Molded Plastic 100% Matte Sn MSL1 [2] H934
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reow temperature of 260 °C
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15 mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25 mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
6. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PHASE SHIFTERS - DIGITAL - SMT
6
HMC934LP5E
v01.1211
400° ANALOG PHASE SHIFTER
1 - 2 GHz
Evaluation PCB
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
List of Materials for Evaluation PCB 131046 [1]
Item Description
J1, J2 Connector, SMA, Jack
J3 Connector, SMA, Jack
U1 HMC934LP5E Analog Phase Shifter
C1, C2 Capacitor, 100 pF, 0402 Pkg.
PCB 127338, Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25 FR