www.clare.com
DS-CPC1832-R02 1
CPC1832
8V Output Solar Cell
RoHS
2002/95/EC e3
Pb
Part # Description
CPC1832N 16-Pin Clear Molded SOIC Package (50/Tube)
CPC1832NTR 16-Pin Clear Molded SOIC Package (1000/Reel)
Parameter Rating Units
Open Circuit Voltage 8 V
Short Circuit Current 50 μA
* Direct sunlight (Approximately 6000 lux)
Applications
Features
Description
Ordering Information
Block Diagram
• Portable Electronics
• Solar Battery Chargers
• Battery Operated Equipment
• Consumer Electronics
• Off-Grid Installation
• Wireless Sensors and Detection
• Flame Detection
• Self Powered Sunlight/ Light Detection
• Self Powered Products
• Remote Installation
• 8V Output
• Triggers with Natural Sunlight
• Provides True Wireless Power
• No EMI/RFI Generation
• Wave Solderable
• Replacement of Discrete Components
• Solid State Reliability
The CPC1832 is a monolithic photovoltaic string of
solar cells with switching circuitry. When operating
in sunlight or a bright artificial light environment the
optical energy will activate the cell array and generate
a voltage at the output. The solar cells are capable
of generating a floating source voltage and current
sufficient to drive and power CMOS ICs, logic gates
and/or provide “trickle charge” for battery applications.
1
89V-
V+
16
www.clare.com
2
CPC1832
R02
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Absolute Maximum Ratings
Electrical Characteristics
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
Parameter Ratings Units
Reverse Voltage 10 V
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
Electrical absolute maximum ratings are at 25°C
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics @ 25°C
Open Circuit Voltage Direct Sun (6000 lux) VOC - 8.5 - V
High Intensity Lamp VOC -10 -V
Short Circuit Current Direct Sun (6000 lux) ISC -50 -μA
16
14
12
10
8
6
4
2
0
0246 8
Light Intensity (lux X 1000)
Normalized Output Voltage (V)
10
Normalized Open Circuit Output Voltage
vs. Light Intensity
200
180
160
140
120
100
80
60
40
20
0
0246 8
Light Intensity (lux X 1000)
Normalized Output Current (μA)
10
Normalized Short Circuit Output Current
vs. Light Intensity
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0 204060 80
Incident Angle (Degrees)
Normalized Output Voltage
100
Normalized Open Circuit Output Voltage
vs. Incident Angle of Light
to Photodiode Surface
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0 204060 80
Incident Angle (Degrees)
Normalized Output Current
100
Normalized Short Circuit Output Current
vs. Incident Angle of Light
to Photodiode Surface
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1832-R02
©Copyright 2009, Clare, Inc.
All rights reserved. Printed in USA.
2/12/09
For additional information please visit our website at: www.clare.com
CPC1832
3
MECHANICAL DIMENSIONS
Manufacturing Information
5.8014 - 6.1976
(0.2284 - 0.2440) 3.8024 - 3.9980
(0.1497 - 0.1574)
PIN
16
PIN
1
9.8019 - 10.000
(0.3859 - 0.3937)
0.1016 - 0.2489
(0.0040 - 0.0098)
1.2192 - 1.3208
(0.0480 - 0.0520)
0.3302 - 0.5080
(0.0130 - 0.0200)
1.3513 - 1.7475
(0.0532 - 0.0688)
0.6706 - 0.8230
(0.0264 - 0.0324)
0.2515 - 0.4978
(0.0099 - 0.0196)
0.1905 - 0.2489
(0.0075 - 0.0098)
0.4064 - 1.2700
(0.0160 - 0.0500)
0º -8º
DIMENSIONS
mm
(inches)
5.40
(0.213)
0.60
(0.024)
1.55
(0.061)
1.27
(0.05)
7º± 1º
top & bottom
4 places
RoHS
2002/95/EC e3
Pb
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
Tape and Reel Packaging for 16-Pin SOIC Package
Dimensions
mm
(inches)
Embossment
Embossed
Carrier
330.2 Dia
(13.00 Dia)
To p Cov e r
Tape Thickness
0.102 Max
(0.004 Max)
User Direction of Feed
Top Cover
Ta p e
P=12.00
(0.47) A0=6.50 ± 0.15
(0.256 ± 0.010)
B0=10.30 ± 0.15
(0.4055 ± 0.01)
W=16.00 ± 0.30
(0.630 ± 0.010)
K0=2.70 ± 0.15
(0.106 ± 0.01)
K1=2.30 ± 0.15
(0.0906 ± 0.01)
7.5
(0.30)
Moisture Sensitivity
Clare has characterized the moisture reflow sensitivity
of this package, and has determined that this
component must be handled in accordance with
IPC/JEDEC standard J-STD-033 moisture sensitivity
level (MSL), level 3 classification.
Soldering Reflow Profile
For proper assembly, the component must be
processed in accordance with the current revision
of IPC/JEDEC standard J-STD-020. Failure to
follow the recommended guidelines may cause
permanent damage to the device resulting in impaired
performance and/or a reduced lifetime expectancy.
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
