Electrical Characteristics (Cont’d): (TC = +25°C, unless otherwise specified)
Nominal Zener Maximum Dynamic
Impedance Typical
Temperature Maximum
NTE Type
Number
Zener Voltage
Vz @ Izt
(Note 1)
Test
Current
(Izt)Zzt @ Izt Zzk @
0.25mA (Izk)
Coefficient
(Note 2)
αvz
Leakage
Current
IR @ VR
Volts mA Ohms Ohms %/°CµA Volts
NTE5041A 51 2.5 125 1100 0.096 0.1 39
NTE5042A 56 2.2 150 1300 0.096 0.1 43
NTE5043A 60 2.1 170 1400 0.097 0.1 46
NTE5044A 62 2.0 185 1400 0.097 0.1 47
NTE5045A 68 1.8 230 1600 0.097 0.1 52
NTE5046A 75 1.7 270 1700 0.098 0.1 56
NTE5047A 82 1.5 330 2000 0.098 0.1 62
NTE5048A 87 1.4 370 2200 0.099 0.1 68
NTE5049A 91 1.4 400 2300 0.099 0.1 69
NTE5050A 100 1.3 500 2600 0.110 0.1 76
NTE5051A 110 1.1 750 3000 0.110 0.1 84
NTE5052A 120 1.0 900 4000 0.110 0.1 91
NTE5053A 130 0.95 1100 4500 0.110 0.1 00
NTE5054A 140 0.90 1300 4500 0.110 0.1 106
NTE5055A 150 0.85 1500 5000 0.110 0.1 114
NTE5056A 160 0.80 1700 5500 0.110 0.1 122
NTE5057A 170 0.74 1900 5500 0.110 0.1 129
NTE5058A 180 0.68 2200 6000 0.110 0.1 137
NTE5059A 190 0.66 2400 6500 0.110 0.1 144
NTE5060A 200 0.65 2500 7000 0.110 0.1 152
Note 1. The ele ct rical char acte ristics are measur ed after allow in g th e de vice to st abilize for 90 seconds
with +30°C lead temperature.
Note 2. Test conditions for temperature coefficient are as follows:
a.Izt = 7.5mA, T1 = +25°C, T2 = +125°C (NTE5000A thru NTE5021A)
b.Izt = Rated Izt, T1 = +25°C, T2 = +125°C (NTE5022A thru NTE5060A)
Device to be temperature stabilized with current applied prior to reading breakdown voltage
at the specified ambient temperature.
Color Band Denotes Cathode
1.000
(25.4)
Min
.200
(5.08)
Max
.090 (2.28)
Dia Max
.022 (.509) Dia Max