Aluminum Electrolytic Capacitors/ FR Radial Lead Type Series: FR Type: A Features Country of origin Low ESR (Same as FM Series) Endurance : 5000 h to 10000 h at +105 C RoHS directive compliant Malaysia Attention Not applicable for automotive Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan -40 C to +105 C 6.3 V.DC to 63 V.DC 4.7 F to 8200 F 20 % (120 Hz/+20 C) I < 0.01 CV (A) After 2 minutes W.V. 6.3 10 16 25 35 50 tan 0.22 0.19 0.16 0.14 0.12 0.10 Add 0.02 per 1000 F for products of 1000 F or more. 63 0.09 (120 Hz/+20 C) After following life test with DC voltage and +105 C2 C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 C, the capacitors shall meet the limits specified below. Duration 511/ 6.311.2 : 5000 hours, 811.5/ 1012.5 : 6000 hours 815/ 1016 : 8000 hours, 8x20 : 9000 hours 1020 to 1025/ 12.520 to 12.535/ 1620 to 1625 : 10000 hours Endurance Capacitance change 25 % of initial measured value (6.3 V to 10 V : 30 %) tan < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current W.V.(V.DC) 4.7 6.3 to 63 Frequency (Hz) Cap (F) to 60 120 1k 10 k 100 k 33 0.45 0.55 0.75 0.90 1.00 47 to 330 0.60 0.70 0.85 0.95 1.00 390 to 1000 0.65 0.75 0.90 0.98 1.00 1200 to 8200 0.75 0.80 0.95 1.00 1.00 Dimensions in mm (not to scale) Sleeve Pressure relief 6.3< (Unit : mm) 10< <8 d0.05 + L 14 min. D0.5 3 min. F0.5 - D0.5 L<16 : L1.5 L>20 : L2.0 Body Dia. D 5 6.3 8 10 Body Length L -- -- -- -- 12.5 to 25 30 to 35 -- Lead Dia. d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Lead space F 2.0 2.5 3.5 5.0 12.5 16 5.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - EE100 - 7.5 03 Sep. 2012 Aluminum Electrolytic Capacitors/ FR Case size/Impedance/Ripple current 6.3 V to 35 V W.V.(V.DC) Case size (DL) Impedance (/100 kHz) 50 V Ripple Current (mA r.m.s./100 kHz) +20 C -10 C +105 C Impedance (/100 kHz) +20 C Ripple Current (mA r.m.s./100 kHz) -10 C +105 C 5 11 0.300 1.000 280 0.340 1.130 250 6.3 11.2 0.130 0.430 455 0.140 0.460 405 8 11.5 0.056 0.168 950 0.061 0.183 870 8 15 0.041 0.123 1240 0.045 0.135 1140 8 20 0.030 0.090 1560 0.033 0.099 1430 10 12.5 0.043 0.114 1290 0.042 0.126 1170 10 16 0.028 0.078 1790 0.030 0.090 1650 10 20 0.020 0.057 2180 0.023 0.069 1890 10 25 0.018 0.054 2470 0.022 0.066 2150 12.5 20 0.018 0.045 2600 0.022 0.055 2260 12.5 25 0.015 0.038 3190 0.018 0.045 2660 12.5 30 0.013 0.033 3630 0.016 0.040 3160 12.5 35 0.012 0.030 3750 0.014 0.035 3270 16 20 0.017 0.043 3300 0.019 0.048 2870 16 25 0.014 0.035 3820 0.016 0.040 3320 63 V W.V.(V.DC) Case size (DL) 5 11 Impedance (/100 kHz) +20 C -10 C 0.510 2.040 Ripple Current (mA r.m.s./100 kHz) +105 C 175 6.3 11.2 0.210 0.840 284 8 11.5 0.092 0.368 566 8 15 0.068 0.272 741 8 20 0.050 0.200 930 10 12.5 0.063 0.252 761 10 16 0.045 0.180 1073 10 20 0.035 0.140 1229 10 25 0.033 0.132 1500 12.5 20 0.033 0.125 1582 12.5 25 0.027 0.092 1995 12.5 30 0.024 0.082 2528 12.5 35 0.021 0.071 2780 16 20 0.029 0.093 2153 16 25 0.024 0.074 2988 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - EE101 - 03 Sep. 2012 Aluminum Electrolytic Capacitors/ FR Standard Products Case size W.V. (V) 6.3 10 16 Specification Lead Length Ripple ImpedEndurLead Lead Space Cap. Dia. (20 %) Dia. Length Current ance ance Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (F) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 150 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 220 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 330 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 470 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 820 8 11.5 950 0.056 6000 0.6 3.5 5.0 1000 8 11.5 950 0.056 6000 0.6 3.5 5.0 8 15 1240 0.041 8000 0.6 3.5 5.0 1200 10 12.5 1290 0.043 6000 0.6 5.0 5.0 1500 8 20 1560 0.030 9000 0.6 3.5 5.0 1800 10 16 1790 0.028 8000 0.6 5.0 5.0 2200 10 20 2180 0.020 10000 0.6 5.0 5.0 2700 10 25 2470 0.018 10000 0.6 5.0 5.0 3900 12.5 20 2600 0.018 10000 0.6 5.0 5.0 4700 12.5 25 3190 0.015 10000 0.6 5.0 5.0 5600 12.5 30 3630 0.013 10000 0.8 5.0 12.5 35 3750 0.012 10000 0.8 5.0 6800 16 20 3300 0.017 10000 0.8 7.5 7.5 8200 16 25 3820 0.014 10000 0.8 7.5 7.5 100 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 150 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 220 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 470 8 11.5 950 0.056 6000 0.6 3.5 5.0 680 8 11.5 950 0.056 6000 0.6 3.5 5.0 820 10 12.5 1290 0.043 6000 0.6 5.0 5.0 10 16 1790 0.028 8000 0.6 5.0 5.0 1000 8 15 1240 0.041 8000 0.6 3.5 5.0 8 20 1560 0.030 9000 0.6 3.5 5.0 1500 10 16 1790 0.028 8000 0.6 5.0 5.0 1800 10 20 2180 0.020 10000 0.6 5.0 5.0 2200 10 25 2470 0.018 10000 0.6 5.0 5.0 3300 12.5 20 2600 0.018 10000 0.6 5.0 5.0 3900 12.5 25 3190 0.015 10000 0.6 5.0 5.0 12.5 30 3630 0.013 10000 0.8 5.0 4700 16 20 3300 0.017 10000 0.8 7.5 7.5 5600 12.5 35 3750 0.012 10000 0.8 5.0 12.5 35 3750 0.012 10000 0.8 5.0 6800 16 25 3820 0.014 10000 0.8 7.5 7.5 68 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 100 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 120 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 220 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 470 8 11.5 950 0.056 6000 0.6 3.5 5.0 8 15 1240 0.041 8000 0.6 3.5 5.0 680 10 12.5 1290 0.043 6000 0.6 5.0 5.0 8 20 1560 0.030 9000 0.6 3.5 5.0 1000 10 16 1790 0.028 8000 0.6 5.0 5.0 10 20 2180 0.020 10000 0.6 5.0 5.0 1500 10 25 2470 0.018 10000 0.6 5.0 5.0 1800 10 25 2470 0.018 10000 0.6 5.0 5.0 2200 12.5 20 2600 0.018 10000 0.6 5.0 5.0 2700 12.5 25 3190 0.015 10000 0.6 5.0 5.0 12.5 30 3630 0.013 10000 0.8 5.0 3300 16 20 3300 0.017 10000 0.8 7.5 7.5 12.5 35 3750 0.012 10000 0.8 5.0 3900 16 20 3300 0.017 10000 0.8 7.5 7.5 12.5 35 3750 0.012 10000 0.8 5.0 4700 16 25 3820 0.014 10000 0.8 7.5 7.5 5600 16 25 3820 0.014 10000 0.8 7.5 7.5 Min. Packaging Q'ty Part No. EEUFR0J151( ) EEUFR0J221( ) EEUFR0J331( ) EEUFR0J471( ) EEUFR0J821( ) EEUFR0J102( ) EEUFR0J122L( ) EEUFR0J122( ) EEUFR0J152L( ) EEUFR0J182( ) EEUFR0J222( ) EEUFR0J272L( ) EEUFR0J392( ) EEUFR0J472( ) EEUFR0J562L EEUFR0J682L EEUFR0J682S( ) EEUFR0J822( ) EEUFR1A101( ) EEUFR1A151( ) EEUFR1A221( ) EEUFR1A471( ) EEUFR1A681( ) EEUFR1A821( ) EEUFR1A102( ) EEUFR1A102L( ) EEUFR1A152L( ) EEUFR1A152( ) EEUFR1A182( ) EEUFR1A222L( ) EEUFR1A332( ) EEUFR1A392( ) EEUFR1A472L EEUFR1A472S( ) EEUFR1A562L EEUFR1A682L EEUFR1A682( ) EEUFR1C680( ) EEUFR1C101( ) EEUFR1C121( ) EEUFR1C221( ) EEUFR1C471( ) EEUFR1C681L( ) EEUFR1C681( ) EEUFR1C102L( ) EEUFR1C102( ) EEUFR1C152( ) EEUFR1C152L( ) EEUFR1C182L( ) EEUFR1C222( ) EEUFR1C272( ) EEUFR1C332L EEUFR1C332S( ) EEUFR1C392L EEUFR1C392S( ) EEUFR1C472L EEUFR1C472( ) EEUFR1C562( ) Straight Taping Leads (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 (pcs) 2000 2000 2000 2000 1000 1000 1000 500 1000 500 500 500 500 500 250 250 2000 2000 2000 1000 1000 500 500 1000 1000 500 500 500 500 500 250 250 2000 2000 2000 2000 1000 1000 500 1000 500 500 500 500 500 500 250 250 250 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - EE102 - 03 Sep. 2012 Aluminum Electrolytic Capacitors/ FR Standard Products Case size W.V. (V) Specification Lead Length Ripple ImpedEndurLead Lead Space Cap. Dia. (20 %) Dia. Length Current ance ance Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (F) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 47 68 100 150 220 330 390 470 560 25 680 820 1000 1200 1500 1800 2200 2700 3300 33 68 100 180 220 270 330 390 470 35 560 680 820 1000 1200 1500 1800 2200 5 5 6.3 6.3 8 8 8 8 8 10 8 8 10 10 10 10 10 12.5 12.5 12.5 16 12.5 16 16 5 6.3 8 8 8 8 10 10 8 8 10 10 10 10 10 12.5 12.5 12.5 16 12.5 12.5 16 11 11 11.2 11.2 11.5 11.5 15 15 20 12.5 20 20 16 20 20 25 25 20 25 30 20 35 20 25 11 11.2 11.5 11.5 11.5 15 12.5 12.5 20 20 16 20 20 25 25 20 25 30 20 35 35 25 280 280 455 455 950 950 1240 1240 1560 1290 1560 1560 1790 2180 2180 2470 2470 2600 3190 3630 3300 3750 3300 3820 280 455 950 950 950 1240 1290 1330 1560 1560 1790 2180 2180 2470 2470 2600 3190 3630 3300 3750 3750 3820 0.300 0.300 0.130 0.130 0.056 0.056 0.041 0.041 0.030 0.043 0.030 0.030 0.028 0.020 0.020 0.018 0.018 0.018 0.015 0.013 0.017 0.012 0.017 0.014 0.300 0.130 0.056 0.056 0.056 0.041 0.043 0.043 0.030 0.030 0.028 0.020 0.020 0.018 0.018 0.018 0.015 0.013 0.017 0.012 0.012 0.014 5000 5000 5000 5000 6000 6000 8000 8000 9000 6000 9000 9000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 5000 5000 6000 6000 6000 8000 6000 6000 9000 9000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 2.0 2.0 2.5 2.5 3.5 3.5 3.5 3.5 3.5 5.0 3.5 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 2.0 2.5 3.5 3.5 3.5 3.5 5.0 5.0 3.5 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 2.5 2.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) (pcs) EEUFR1E470( ) EEUFR1E680( ) EEUFR1E101( ) EEUFR1E151( ) EEUFR1E221( ) EEUFR1E331( ) EEUFR1E391L( ) EEUFR1E471Y( ) EEUFR1E471L( ) EEUFR1E471( ) EEUFR1E561L( ) EEUFR1E681L( ) EEUFR1E681( ) EEUFR1E821( ) EEUFR1E102( ) EEUFR1E102L( ) EEUFR1E122L( ) EEUFR1E152( ) EEUFR1E182( ) EEUFR1E222L EEUFR1E222S( ) EEUFR1E272L EEUFR1E272S( ) EEUFR1E332( ) EEUFR1V330( ) EEUFR1V680( ) EEUFR1V101( ) EEUFR1V181( ) EEUFR1V221( ) EEUFR1V271L( ) EEUFR1V271( ) EEUFR1V331U( ) EEUFR1V391L( ) EEUFR1V471L( ) EEUFR1V471( ) EEUFR1V561( ) EEUFR1V681( ) EEUFR1V681L( ) EEUFR1V821L( ) EEUFR1V102( ) EEUFR1V122( ) EEUFR1V152L EEUFR1V152S( ) EEUFR1V182L EEUFR1V222L EEUFR1V222( ) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 2000 2000 2000 2000 1000 1000 1000 1000 1000 500 1000 1000 500 500 500 500 500 500 500 250 250 250 2000 2000 1000 1000 1000 1000 500 500 1000 1000 500 500 500 500 500 500 500 250 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - EE103 - 03 Sep. 2012 Aluminum Electrolytic Capacitors/ FR Standard Products (Low Voltage) Case size W.V. (V) 50 Specification Lead Length Ripple ImpedEndurLead Lead Space Cap. Dia. (20 %) Dia. Length Current ance ance Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (F) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 4.7 10 22 47 56 100 120 150 180 220 270 330 470 560 680 820 1000 18 47 82 100 120 150 63 180 220 270 330 390 470 560 680 820 5 5 5 6.3 6.3 8 8 10 8 10 10 10 12.5 12.5 12.5 12.5 16 16 5 6.3 8 8 10 8 10 8 10 10 10 10 10 12.5 12.5 12.5 12.5 12.5 16 12.5 16 11 11 11 11.2 11.2 11.5 15 12.5 20 16 20 25 20 25 30 35 20 25 11 11.2 11.5 15 12.5 20 16 20 16 20 25 20 25 20 20 25 25 30 20 35 25 185 250 250 405 405 870 1140 1170 1430 1650 1890 2150 2260 2660 3160 3270 2870 3320 175 284 566 741 761 930 1073 930 1073 1229 1500 1229 1500 1582 1582 1995 1995 2528 2153 2780 2988 0.620 0.340 0.340 0.140 0.140 0.061 0.045 0.042 0.033 0.030 0.023 0.022 0.022 0.018 0.016 0.014 0.019 0.016 0.510 0.210 0.092 0.068 0.063 0.050 0.045 0.050 0.045 0.035 0.033 0.035 0.033 0.033 0.033 0.027 0.027 0.024 0.029 0.021 0.024 5000 5000 5000 5000 5000 6000 8000 6000 9000 8000 10000 10000 10000 10000 10000 10000 10000 10000 5000 5000 6000 8000 6000 9000 8000 9000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 2.0 2.0 2.0 2.5 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.0 2.5 3.5 3.5 5.0 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) (pcs) EEUFR1H4R7( ) EEUFR1H100( ) EEUFR1H220( ) EEUFR1H470( ) EEUFR1H560( ) EEUFR1H101( ) EEUFR1H121L( ) EEUFR1H151( ) EEUFR1H181L( ) EEUFR1H221( ) EEUFR1H271( ) EEUFR1H331L( ) EEUFR1H471( ) EEUFR1H561( ) EEUFR1H681L EEUFR1H821L EEUFR1H821S( ) EEUFR1H102( ) EEUFR1J180( ) EEUFR1J470( ) EEUFR1J820( ) EEUFR1J101L( ) EEUFR1J101( ) EEUFR1J121L( ) EEUFR1J121( ) EEUFR1J151L( ) EEUFR1J151( ) EEUFR1J181( ) EEUFR1J221L( ) EEUFR1J271U( ) EEUFR1J271L( ) EEUFR1J271( ) EEUFR1J331( ) EEUFR1J391( ) EEUFR1J471( ) EEUFR1J561L EEUFR1J561S( ) EEUFR1J681L EEUFR1J821( ) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 2000 2000 2000 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 2000 2000 1000 1000 500 1000 500 1000 500 500 500 500 500 500 500 500 500 250 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - EE104 - 03 Sep. 2012