Electronic Components Omron Electronic Components: The Quality, Flexibility and Global Support You Need Master Selection Guide For More Detailed Information... Visit Us Online: www.components.omron.com * Browse Omron's full range of Product information and selection guides. * Download PDF's -- datasheets, brochures, and more. * Find Omron solutions for competitive products. * Locate a Distributor and search for available inventory. Call Us: 1-847-882-2288 Monday through Friday, 7:30 a.m. to 6:00 p.m. Central Time (CT) Relays Switches Photomicrosensors Micro Sensors Connectors Email Us: components@omron.com OMRON ELECTRONICS COMPONENTS LLC 55 Commerce Drive * Schaumburg, IL 60173 IT IS THE BUYER'S SOLE RESPONSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER'S APPLICATION, END PRODUCT, OR SYSTEM. BUYER SHALL TAKE THE APPLICATION RESPONSIBILITY IN ALL CASES, BUT THE FOLLOWING IS A NON-EXHAUSTIVE LIST OF APPLICATIONS FOR WHICH PARTICULAR ATTENTION MUST BE GIVEN: (i) Outdoor use; uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines, and equipment that could present a risk to life or property. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE END PRODUCT AS A WHOLE HAS BEEN DESIGNED TO ADDRESS RELEVANT RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR ITS INTENDED USE. YOI-E-03 (c) 2006 Omron Electronic Componenets Printed in the U.S.A. 06/2006 REQUIRED PRECAUTIONS www.components.omron.com USAcovers.indd 2-3 7/14/06 2:42:48 PM Omron Electronic Components LLC Stability and Experience With over 70 years experience, Omron continues to apply the latest technologies providing you with innovative efficient control component solutions. Our wide range of relays, switches, sensors, and connectors allows our customers to streamline vendor lists and reduce the cost of procurement. Quality First Our commitment, your benefit Omron makes a conscious choice to relentlessly pursue quality. Our quality engineers are part of the design and manufacturing from the start. We design and evaluate at the component level, test and adjust during manufacturing, and examine every physical, mechanical, and electrical aspect of each final product before it leaves the factory. World-Wide Headquarter Locations The Americas Asia-Pacific U.S.A. / Canada / Brazil - HQ SINGAPORE OMRON ELECTRONIC COMPONENTS LLC (OCB-AM) 55 East Commerce Drive, Suit B, Illinois, 60173 U.S.A. TEL : 1-847-882-2288 FAX : 1-847-882-2192 Japan - World Headquarters China Japan HONG KONG Customer Support Omron's sales engineers, inside sales representatives, and customer service staff have experience with all types of electronic applications. No matter what the application or volume, we will find just the right component for your project. OMRON ELECTRONIC COMPONENTS Kyoto Head Office Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 Japan Tel : 81-75-344-7000 Fax : 81-75-344-7001 RoHS Compliant Products Most of Omron's electronic components are already compliant, and we are striving for 100% compliance by mid 2006. Europe Broad Product Offering Relays, The #1 Supplier In The World: * MOS FET * Low Signal * RF/HF * Power PCB * Automotive * General-Purpose * Solid State Switches: * Snap Action * Tactile * DIP * Dome Array * Thumbwheel * Rocker Photomicrosensors: * Slotted * Reflective Micro Sensors: * Pressure * Tilt * Flow * Shock/Vibration * Clog Filter Connectors * FPC * FFC OMRON ELECTRONIC COMPONENTS PTE LTD. (OCB-SG) 750B Chai Chee Road #01-02 Technopark@Chai Chee Singapore 469002 TEL : 65-7446-7400 FAX : 65-6446-7411 OMRON ELECTRONIC COMPONENTS EUROPE B.V. (OCB-EU-Benelux) Wegalaan 57, 2132 JD Hoofddorp The Netherlands TEL : 31-23-568-1200 FAX : 31-23-568-1212 OMRON ELECTRONIC COMPONENTS (HONG KONG) LTD. (OCB-HK) Unit 601-9, Tower 2, Th Gateway No.25, Canton Road, Tsimshatsui, Kowloon Hong Kong TEL : 852-2375-3827 FAX : 852-2375-1475 CHINA OMRON ELECTRONIC COMPONENTS TRADING (SHANGHAI) LTD. SHANGHAI OFFICE (OCB-CN(SH)) Rm2503, Raffles City Shanghai (Office Tower), No.268 Xi Zang Middle Road, Huang Pu District, Shanghai, 200001 China TEL : 86-21-6340-3737 FAX : 86-21-6340-3757 Additional information can be found at www.components.omrom.com, or by calling us at: 847.882.2288 Monday through Friday 7:30 AM until 6:00 PM CST. Our inside sales staff will be ready to provide you with detailed product information, technical design support, or the location of your local Omron sales office or authorized distributor. Visit: www.components.omron.com Email: components@omron.com Phone: 847-882-2288 Monday through Friday 7:30 AM till 6:00 PM CST. USAcovers.indd 4-5 7/14/06 2:42:52 PM Omron Electronic Components LLC Stability and Experience With over 70 years experience, Omron continues to apply the latest technologies providing you with innovative efficient control component solutions. Our wide range of relays, switches, sensors, and connectors allows our customers to streamline vendor lists and reduce the cost of procurement. Quality First Our commitment, your benefit Omron makes a conscious choice to relentlessly pursue quality. Our quality engineers are part of the design and manufacturing from the start. We design and evaluate at the component level, test and adjust during manufacturing, and examine every physical, mechanical, and electrical aspect of each final product before it leaves the factory. World-Wide Headquarter Locations The Americas Asia-Pacific U.S.A. / Canada / Brazil - HQ SINGAPORE OMRON ELECTRONIC COMPONENTS LLC (OCB-AM) 55 East Commerce Drive, Suit B, Illinois, 60173 U.S.A. TEL : 1-847-882-2288 FAX : 1-847-882-2192 Japan - World Headquarters China Japan HONG KONG Customer Support Omron's sales engineers, inside sales representatives, and customer service staff have experience with all types of electronic applications. No matter what the application or volume, we will find just the right component for your project. OMRON ELECTRONIC COMPONENTS Kyoto Head Office Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 Japan Tel : 81-75-344-7000 Fax : 81-75-344-7001 RoHS Compliant Products Most of Omron's electronic components are already compliant, and we are striving for 100% compliance by mid 2006. Europe Broad Product Offering Relays, The #1 Supplier In The World: * MOS FET * Low Signal * RF/HF * Power PCB * Automotive * General-Purpose * Solid State Switches: * Snap Action * Tactile * DIP * Dome Array * Thumbwheel * Rocker Photomicrosensors: * Slotted * Reflective Micro Sensors: * Pressure * Tilt * Flow * Shock/Vibration * Clog Filter Connectors * FPC * FFC OMRON ELECTRONIC COMPONENTS PTE LTD. (OCB-SG) 750B Chai Chee Road #01-02 Technopark@Chai Chee Singapore 469002 TEL : 65-7446-7400 FAX : 65-6446-7411 OMRON ELECTRONIC COMPONENTS EUROPE B.V. (OCB-EU-Benelux) Wegalaan 57, 2132 JD Hoofddorp The Netherlands TEL : 31-23-568-1200 FAX : 31-23-568-1212 OMRON ELECTRONIC COMPONENTS (HONG KONG) LTD. (OCB-HK) Unit 601-9, Tower 2, Th Gateway No.25, Canton Road, Tsimshatsui, Kowloon Hong Kong TEL : 852-2375-3827 FAX : 852-2375-1475 CHINA OMRON ELECTRONIC COMPONENTS TRADING (SHANGHAI) LTD. SHANGHAI OFFICE (OCB-CN(SH)) Rm2503, Raffles City Shanghai (Office Tower), No.268 Xi Zang Middle Road, Huang Pu District, Shanghai, 200001 China TEL : 86-21-6340-3737 FAX : 86-21-6340-3757 Additional information can be found at www.components.omrom.com, or by calling us at: 847.882.2288 Monday through Friday 7:30 AM until 6:00 PM CST. Our inside sales staff will be ready to provide you with detailed product information, technical design support, or the location of your local Omron sales office or authorized distributor. Visit: www.components.omron.com Email: components@omron.com Phone: 847-882-2288 Monday through Friday 7:30 AM till 6:00 PM CST. USAcovers.indd 4-5 7/14/06 2:42:52 PM TABLE OF CONTENTS General Omron Information History and Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Core Competencies, Technologies, & Markets served . 3 Relays MOS FET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 & 5 Low Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 & 7 HF/RF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Power PCB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9~13 DC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . 15~17 Solid State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18~20 Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Switches Designed to "Drop-In" your Application. . . . . . . . . . . . 22 Snap Action* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23~28 Tactile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29~31 DIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 & 33 Photomicrosensors Photo IC-Slotted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Phototransister - Reflective . . . . . . . . . . . . . . . . . . . . . . . 34 Phototransister - Slotted . . . . . . . . . . . . . . . . . . . . . . . . . 35 Micro Sensors Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Tilt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Shock/Vibration/Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Connectors FPC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 & 39 FFC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 * Sealed Snap Action switches are available on pages 26 & 27. ECbodyREADERS.indd 1 7/14/06 11:21:25 PM Omron History & Profile History: Omron was founded May 10, 1933 in Kyoto, Japan, by founder Kazuma Tateisi. The first product developed and released by Omron was a timer for X-ray equipment. Since then, Omron has expanded globally and produced a steady stream of breakthroughs in electronic components that have contributed to the improvement of productivity in many different industries. Omron's consistent striving to accurately anticipate the potential needs of society and develop businesses to satisfy those needs has made the Omron Group what it is today. Dr. Tateisi's passion and progressive attitude are instilled to this day in all Omron employees, and the challengeoriented spirit remains the main source of Omron's identity. By consistently preserving the spirit and philosophy of Omron's founder, we are determined to continue meeting the challenges of creating a better tomorrow. Relays - Low Signal Achievements: * December 1943 - Development of Japan's first precision switch; established Omron (then Tateisi Electric) as a `technological pioneer' in Japan. * 1948 - Establishment of Omron Tateisi Electronics Co. coincided with the successful development and production of a new current limiter integrating Omron's precision switch and protective relay technologies. * 1955-1965 - Launched the full-scale production of control components and the introduction of a steady stream of new products including advanced precision switches & compact protective relays. * 1960 - Development of the innovative solid-state proximity switch and solid-state relay. * 1963 - Introduction of the world's first automatic meal-ticket vending machine. * 1969 and 1971 - Development of the first off-line and on-line automatic cash dispensers which established Omron as one of the pioneers of the banking revolution in Japan. * 1967 - Completion of the world's first automated train station system achieved by drawing on the company's advanced card system technology. * January 1990 - the company was renamed to Omron Corporation and marked a commitment to continue expansion of business lines and global-scale production. * April 1999 - Omron establishes a strategic system of five specialized, independent business units. * 2002 - Establishment of Omron China to accelerate market expansion in to China and Asia-Pacific. Profile: Omron Corporation is a $5.5 billion global leading supplier of electronics and control system components and services. Omron Business Fields: Electronic Components Business Automotive Electronics Business Social System Business Industrial Automation Business Healthcare Business 2 ECbodyREADERS.indd 2 7/14/06 11:21:26 PM Relays - Low Signal Omron's Core Competencies, Technologies & Markets Served Design Synthesis: Our products' designs are based on a combination of our core competencies and core technologies to effectively meet customer and market needs. By efficiently and creatively manipulating these competencies, we are able to develop and manufacture a broad offering of cost effective, high quality, and environmentally friendly products. As the global market's demand for new and innovative products continues to grow, Omron pledges to expand its research and development of new core technologies. Commitment to the Environment: Omron is committed to creating products that are designed with consideration for the environment throughout their entire lifespan (what we call "Eco-Products"). These considerations address energy and resource conservation, extended product life, reuse and recycling, as well as avoidance of hazardous chemical substances. Our goal is to make a proactive contribution to reducing the harm caused by our societal system to the environment through the development of more environmentally sound products. 3 ECbodyREADERS.indd 3 7/14/06 11:21:30 PM Relays - MOS FET G3VM-200 G3VM-350 G3VM High Voltage & Dielectric G3VM-400 General Attributes Dimensions mm (in) Relays - MOS FET Features Load voltage Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information * Broad product offering * 1 & 2 channel * Broad product offering * Capable of switching * 10kV surge withstand configurations * Form A & Form B loads up to 600V models available * Ideal for Instrumentation, configurations (AC and DC) Broadband Systems, * Ideal for Instrumentation, * Ideal for Instrumentation, * 10kV surge withstand Broadband Systems, Measurement Devices, Broadband Systems, * Ideal for Measurement Devices, Data Loggers, Consumer Measurement Devices, Instrumentation, Data Loggers, Consumer Electronics, Medical Data loggers, Consumer Electronic Automatic Electronics, Security Equipment Electronics, Security Exchange Systems, Systems, Electronic Systems, Electronic Industrial Automation Automatic Exchange Automatic Exchange Systems, Measurement Systems, Industrial Systems, Industrial Devices, Security Automation Equipment, Automation Equipment, Systems, Medical Medical Equipment Medical Equipment Equipment G3VM Current Limiting Please refer to specific data sheets for all dimensional information * Current limiting of 150 to 300mA * Ideal for Electronic Automatic Exchange Systems, Multi-function Telephones, Cordless Telephones, Measurement Devices, Instrumentation 0-200V (AC or DC) 0-350V (AC or DC) 0-400V (AC or DC) 0-600V (AC or DC) 0-350V (AC or DC) 0-50mA & 0-200mA 0-90mA, 0-100mA, 0-110mA, 0-120mA, 0-150mA 0-120mA 0-100mA 0-120mA 5 & 30 15, 27, 30, 25, 40 17 & 18 25 22 Output capacitance _ _ _ _ _ Available switching configurations 1 Form A, 2 Form A 1 Form A, 1 Form B, 1 Form A + 1 Form B 2 Form A, 2 Form B 1 Form A, 2 Form A 1 Form A 1 Form A, 2 Form A 10nA (max.) & 1.0A (max.) 1.0A (max.) 1.0A (max.) 1.0A (max.) 1.0A (max.) turn-ON time (typical) 40ms & 600ms 0.1ms, 0.25ms, 0.3ms, 0.5ms, 1.0ms 0.3ms & 0.5ms 0.2ms 0.3ms & 0.5ms turn-OFF time (typical) 100ms 0.1ms, 0.15ms, 0.5ms, 1.0ms, 3.0ms 0.1ms & 0.5ms 0.2ms 0.3ms & 0.5ms Dielectric strength (AC for 1 minute between input and output) 1,500Vrms (min.) 1,500Vrms (min.) 2,500Vrms (min.) 1,500Vrms (min.) 2,500Vrms (min.) 5,000Vrms (min.) 5,000Vrms (min.) 1,500Vrms (min.) 2,500Vrms (min.) Available packaging & terminal choices SOP 4 PIN, 6 PIN, 8 PIN PCB, SMT, SOP 4 PIN, 6 PIN, 8 PIN PCB, SMT, SOP 4 PIN, 6 PIN, 8 PIN PCB & SMT 6 PIN PCB, SMT & SOP 4 PIN, 6 PIN, 8 PIN Tape & reel Tape & reel Tape & reel Tape & reel Tape & reel UL 1577 UL 1577 UL 1577 UL 1577 UL 1577 Maximum Ratings and Electrical Characteristics Continuous load current ON resistance (typical) Leakage current Accessories Approved standards 4 ECbodyREADERS.indd 4 7/14/06 11:21:31 PM Relays - MOS FET General Attributes Dimensions mm (in) G3VM GR G3VM LR G3VM-60 G3VM-80 G3VM-22 Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information * C x R characteristics as low as 5pF* * Low leakage current * Very high operating speed * Ideal for IC and Memory Test Equipment, SoC Testers, Measurement Devices, Instrumentation, Medical Equipment, Broadband Systems, Data Loggers, Security Systems * Smallest MOS FET relay on the market * C x R characteristics as low as 5pF* * Low leakage current * Very high operating speed * Ideal for IC and Memory Test Equipment, SoC Testers, Measurement Devices, Instrumentation, Medical Equipment, Broadband Systems, Data Loggers, Security Systems * High current switching * High current switching capability capability * Low ON-resistance * Low leakage current * Low leakage current * Ideal for Broadband * Cost effective solutions Systems, * Ideal for Measurement Measurement Devices, Devices, Instrumentation, Instrumentation, Medical Security Systems, Equipment, Data Medical Equipment, Loggers, Consumer Alarm Controls, Electronics Consumer Electronics * Single input channel with dual output channels * Low ON-resistance * Ideal for Inline Interface Applications, Data Loggers, ADSL Modems and Routers, Edge Routers, Data Storage Devices 0-20V (AC or DC) 0-40V (AC or DC) 0-20V (AC or DC) 0-40V (AC or DC) 0-60V (AC or DC) 0-80V (AC or DC) 0-20V (AC or DC) 0-120mA 0-160mA 0-300mA 0-120mA 0-160mA 0-300mA 0-450mA 0-400mA 0-500mA 0-1,000mA 0-2,000mA 0-2,500mA 0-350mA 0-1,250mA 0-150mA 1, 5, 10 0.8, 1, 5, 10 0.12 (max.) 7 (max.) 1 (typ.) 0.11 & 1.0 2 Output capacitance 1.0pF (typ.) 5.0pF (typ.) 10pF (typ.) 0.8pF (typ.) 1.0pF (typ.) 5.0pF (typ.) 10pF (typ.) _ _ _ Available switching configurations 1 Form A 1 Form A 1 Form A 1 Form A Dual 1 Form A 1.0nA (max.) 1.0nA (max.) 1.0nA (max.) & 1.0A (max.) 0.2nA (typ.) & 1.2nA (typ.) 1.0A (max.) turn-ON time (typical) 0.3ms 0.3ms 0.8ms 1.0ms 1.4ms 0.3ms 2.0ms 0.5ms turn-OFF time (typical) 0.3ms 0.3ms 0.1ms 0.2ms 0.6ms 0.3ms 0.7ms 0.5ms Dielectric strength (AC for 1 minute between input and output) 1,500Vrms (min.) 1,500Vrms (min.) 1,500Vrms (min.) 2,500Vrms (min.) 1,500Vrms (min.) 2,500Vrms (min.) Available packaging & terminal choices SOP 4 PIN SOP 4 PIN SOP, PCB, SMT 4 PIN, 6 PIN SOP 4 PIN, 6 PIN PCB & SMT 8 PIN Tape & reel Tape & reel Tape & reel Tape & reel Tape & reel UL 1577 UL 1577 UL 1577 UL 1577 UL 1577 Features Load voltage Maximum Ratings and Electrical Characteristics Continuous load current ON resistance (typical) Leakage current Accessories Approved standards Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information Relays - MOS FET Please refer to specific data sheets for all dimensional information 5 ECbodyREADERS.indd 5 7/27/06 8:32:01 AM Relays - Low Signal General Attributes Dimensions mm (in) Switching Relays - Low Signal Features Contact Information Contact form Contact type G6J-Y G6K G6H G6S G6A 10.0 H x 10.6 L x 5.7 W (0.39 x 0.42 x 0.22) 5.30 H x 10.20 L x 6.70 W (0.21 x 0.40 x 0.26) 5.08 H x 13.97 L x 8.89 W 9.40 H x 15 L x 7.50 W (0.20 x 0.55 x 0.35) (0.37 x 0.59 x 0.30) 8.40 H x 20.20 L x 10.10 W (0.33 x 0.80 x 0.40) 1A max. 1A max. 1A max. 2A max. 2A max. * Slimline, 2 Form C, 1 Amp relay * SMT & PCB versions * 2.5kV surge withstand * Available in SMT & PCB * Latching & non-latching versions * Ideal for Telecom, Test & Measurement, Medical, Security, Computer Peripheral, Office Automation * Small real estate, 2 Form C, 1 Amp relay * 100mW power consumption * 2.5kV surge withstand * SMT & PCB versions * Latching & non-latching models * Ideal for Telecom, Test & Measurement, Medical, Security, Office Automation, Computer Peripheral * Low profile (5mm), 2 Form C, 1 Amp relay) * Available in SMT & PCB * 1.5kV surge withstand * 140mW power consumption * Ideal for Telecom, Test & Measurement, Medical, Security, Office Automation, Computer Peripheral * Industry standard, 2 Form C, 2 Amp relay * 2.5 kV surge withstand * SMT gullwing, SMT inside-L, PCB models * Latching & non-latching versions * European version available (supplementary insulation at 250V at pollution degree 2 per EN60950/EN41003) * Ideal for Telecom, Thermostats, Medical, Test & Measurement, Security * Industry standard, 2 Form C, 2 Amp relay * 200mW, 400mW versions * 2 Pole & 4 Pole models * Latching & non-latching versions * 1.5kV surge withstand * Ideal for Telecom, Test & Measurement, Security 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C, 4 Form C Bifurcated crossbar Bifurcated crossbar Bifurcated crossbar Bifurcated crossbar Bifurcated crossbar Ag with Au alloy clad Ag with Au clad Ag with Au clad Ag with Au clad; AgPd with Au clad Ag with Au clad; AgPd with Au clad Rated load (under resistive load) 0.3A @ 125VAC, 1A @ 30VDC 0.3A @ 125VAC, 1A @ 30VDC 0.5A @ 125VAC, 1A @ 30VDC 0.5 @ 125VAC, 2A @ 30VDC 0.3A to 0.5A @ 125VAC, 1A to 2A @ 30VDC Max. operating voltage 125VAC, 110VDC 125VAC, 60VDC 125VAC, 110VDC 250VAC, 220VDC 250VAC, 220VDC Max. switching capacity under resistive load 37.5VA, 30W (NO) 37.5VA, 30W 62.5VA, 33W 62.5VA, 60W 125VA, 60W 100,000 100,000 100,000 100,000 500,000 10A @ 10mVDC 10A @ 10mVDC 10A @ 10mVDC 10A @ 10mVDC 10A @ 10mVDC 3, 4.5, 5, 12, 24VDC 3, 4.5, 5, 6, 9, 12, 24VDC 3, 5, 6, 9, 12, 24, 48VDC 3, 4.5, 5, 6, 9, 12, 24VDC 3, 5, 6, 9, 12, 24, 48VDC 140mW (230mW for DC24) 100mW (standard and latching) 140mW (standard) 140mW (standard) 140mW, 200mW (latching) 200mW (DPDT standard) 180mW (DPDT latching) 360mW (4PDT standard) 1,500VAC 1,500VAC 1,000VAC 2,000VAC 1,000VAC Contact material Min. electrical service life (operations at rated load) Min. permissible load (for reference only) Coil Information Coil voltage Power consumption Characteristics Dielectric strength between coil & contacts (50/60 Hz for 1 minute) Surge withstand 2.5kV (2 x 10s) 2.5kV (2 x 10s) 1.5kV (10 x 160s) 2.5kV (2 x 10s) 1.5kV (10 x 160s) Terminal choices SMT Gullwing, PCB SMT Gullwing, SMT Inside-L, PCB PCB (G6H), SMT Gullwing (G6H-2F) SMT Gullwing, SMT Inside-L, PCB PCB Tape & reel available Tape & reel available Tape & reel available Tape & reel available - Bellcore 2.5kV / Telcordia GR-1089-CORE 2.5kV between coil and contacts Bellcore 2.5kV / Telcordia GR-1089-CORE 2.5kV between coil and contacts UL, CSA, (FCC Part 68) Bellcore 2.5 kV / Telcordia UL, CSA, (FCC Part 68) GR-1089-CORE 2.5 kV (between coil and contacts) Packaging Approved standards 6 ECbodyREADERS.indd 6 7/23/06 6:42:10 PM Relays - Low Signal G5A General Attributes Dimensions mm (in) G5V-1 G6L G5V-2 G6E 10.0 H x 12.50 L x 7.50 W (0.39 x 0.49 x 0.30) 4.5 H x 10.6 L x 7.0 W (0.18 x 0.42 x 0.28 11.43 H x 20.32 L x 9.91 W (0.45 x 0.80 x 0.39) 8.38 H x 16 L x 9.9 W (0.33 x 0.63 x 0.39) 1A max. 1A max. 1A max. 2A max. 3A max. * General use, 2 Form C, 1 Amp relay * Semi-sealed or fullysealed construction * Ideal for Telecom, Security, Computer Peripheral, Office Automation * General use, 1 Form C, 1 Amp relay * 150mW power consumption *1.5kV surge withstand * Ideal for Telecom, Security, Computer Peripheral * Very low profile, 1 Form A, 1 Amp relay * 1.5kV surge withstand * SMT & PCB versions * Ideal for Security & General Use * 2 Form C, 1-2 Amp relay * Ideal for general use * Industry standard footprint * 150mW, 360mW & 500mW coil power versions * 1.5 kV surge withstand * General use, 1 Form C, 3 Amp relay * 2.5 kV surge withstand * 200mW, 400mW models * Latching and non-latching versions 2 Form C 1 Form C 1 Form A 2 Form C 1 Form C Bifurcated crossbar Single crossbar Single crossbar Bifurcated crossbar Bifurcated crossbar Contact material Ag with Au clad Ag with Au clad Ag with Au clad Ag with Au clad Ag with Au clad Rated load (under resistive load) 0.5A @ 24VAC, 1A @ 24VDC 0.5A @ 125VAC, 1A @ 24VDC 0.3A @ 125VAC, 1A @ 24VDC 0.5A @ 125VAC, 2A @ 30VDC 0.4A @ 125VAC, 2A @ 30VDC 125VAC, 125VDC 125VAC, 60VDC 125VAC, 60VDC 125VAC, 125VDC 250VAC, 220VDC 37.5VA, 33W 62.5VA, 30W 37.5VA, 24W 62.5VA, 60W 50VA, 60W 100,000 100,000 100,000 300,000 100,000 1mA @ 5VDC 1mA @ 5VDC 1mA @ 5VDC 10A @ 10mVDC 10A @ 10mVDC 5, 6, 9, 12, 24, 48VDC 5, 6, 9, 12, 24VDC 3, 4.5, 5, 12, 24VDC 3, 5, 6, 9, 12, 24, 48VDC 3, 5, 6, 9, 12, 24, 48VDC 200mW (standard & latching) 150mW 180mW (standard) 500mW (standard) 360mW (high-sensitivity) 150mW (ultra-sensitive) 200mW (standard) 400mW (standard) 1,000VAC 1,000VAC 1,000VAC 1,000VAC 1,500VAC Surge withstand _ 1.5kV (10 x 160s) - 1.5kV (10 x 160s) 2.5kV (2 x 10s) Terminal choices PCB PCB PCB, SMT Gullwing PCB PCB - - Tape & reel available - - UL, CSA UL, CSA UL/CSA (FCC Part 68) UL, CSA UL/CSA (FCC Part 68) Bellcore 2.5kV / Telcordia GR-1089-CORE 2.5kV between coil and contacts Switching Features Contact Information Contact form Contact type Max. operating voltage Max. switching capacity under resistive load Min. electrical service life Relays - Low Signal 8.38 H x 16 L x 9.9 W (0.33 x 0.63 x 0.39) (operations at rated load) Min. permissible load (for reference only) Coil Information Coil voltage Power consumption Characteristics Dielectric strength between coil & contacts (50/60 Hz for 1 minute) Packaging Approved standards 7 ECbodyREADERS.indd 7 7/14/06 11:21:43 PM Relays - Low Signal RF/HF NEW! G6W General Attributes G6Y Dimensions mm (in) 8.9 H x 20 L x 9.4 W (0.35 x 0.79 x 0.37) 9.20 H x 20.70 L x 11.70 W 8.9 H x 20 L x 8.6 W (0.35 x 0.79 x 0.34) (0.36 x 0.81 x 0.46) Switching 0.5A max. Relays - Low Signal RF/HF G6Z G6K-RF G9YA 5.4 H x 10.3 L x 6.9 W (0.21 x 0.41 x 0.27) 39.0 H x 34.0 L x 13.2 W (1.54 x 1.34 x 0.52) 1A max. 0.5A max. 1A max. 100mA max. * 900MHz+ HF relay * 1 Form C * Micro strip line technology * Ideal for CATV, Digital TV tuners, Test & Measurement * 2.6GHz+ HF relay * 1 Form C * Micro strip line technology * 75 & 50 impedance models * Latching & non-latching models * Reverse terminal configurations * Y & E terminal configurations * SMT and PCB versions * Ideal for Base Station LNA & TMA switching, CATV, Digital TV tuners, Test & Measurement, Broadcast, FWA * 1GHz+ HF relay * 2 Form C * 100mW coil power * Smallest 2 Form C on the market * Ideal for Test & Measurement, CATV, Digital TV tuners * 26.5GHz bandwidth * Coaxial HF relay * 60dB isolation (26.5GHz) * Contact carry power of 120W at 3GHz * Available in failsafe & TTL-driven models * Also available in non-latching and dual latching configuraitons * Ideal for Mobile Communications Infrastructure Equipment, Broadcast Equipment, Test and Measurement Equipment, Wireless LAN 65dB (2GHz) 60dB (2.5GHz) 40dB (5.0GHz) 65dB (900MHz) 60 - 65dB (900MHz) 30 - 45dB (2.6GHz) 20 - 30dB (1GHz) 60dB (26.5GHz) 65dB (12.4GHz) Insertion loss 0.2dB (2GHz) 0.2dB (2.5GHz) 0.4dB (5.0GHz) 0.5dB (900MHz) 0.1 - 0.2dB (900MHz) 0.3 - 0.5dB (2.6GHz) 0.2dB (1GHz) 0.8dB (26.5GHz) 0.4dB (12.4GHz) 0.3dB (8GHz) 1.5 (900MHz) 1.1 - 1.2 (900MHz) 1.3 - 1.5 (2.6GHz) 0.2dB (1GHz) 1.7 (26.5GHz) 1.35 (12.4GHz) 1.25 (8GHz) 1 Form C 1 Form C 2 Form C 1 Form C Twin crossbar Twin crossbar Bifurcated crossbar Twin crossbar Contact material Au clad Cu alloy Au clad Cu alloy Au clad Cu alloy Au alloy on Ag base Au clad Cu alloy Rated load 10mA @ 30VAC (under resistive load) 10mA @ 30VDC 2.5GHz, 10W 10mA @ 30VAC; 10mA @ 30VAC; 900 MHz, 1W 10mA @ 30VAC; 10mA @ 30VDC; 900MHz, 10W 0.3A @ 125VAC; 1A @ 30VDC 100mA @ 30VDC 30VDC, 30VAC 30VDC, 30VAC 60VDC, 125VAC 30VDC 10VA, 10W 10VA, 10W 37.5VA, 30W 120W (3GHz) 300,000 300,000 300,000 5,000,000 3, 4.5, 5, 6, 9, 12, 24VDC 3, 4.5, 5, 9, 12, 24VDC 3, 4.5, 5, 6, 9, 12, 24VDC 4.5, 5, 12, 15, 24, 28VDC 200mW 200mW (standard) 200mW (single latching) 360mW (dual latching) 100mW 500mW (dual latching) 700mW (failsafe) 1,000VAC 1,000VAC 750VAC 500VAC PCB PCB, SMT Gullwing SMT Gullwing SMA Terminals, Solder Terminals, Pin Terminals - Tape & reel available - Connector Cables Features * 5GHz+ HF relay * 1 Form C * Tri-plate micro strip line technology * Latching & non-latching models * SMT and PCB versions * Ideal for Base Station LNA & TMA switching, Test & Measurement, Broadcast, FWA HF Characteristics Isolation VSWR 1.2 (2GHz) 1.2 (2.5GHz) 1.5 (5.0GHz) Contact Information Contact form 1 Form C Contact type(s) Twin crossbar Max. operating voltage 30VDC, 30VAC Max. switching capacity 10VA, 10W under resistive load Min. electrical service life 300,000 (operations at rated load) Coil Information Coil voltage 3, 4.5, 9, 12, 24VDC Power consumption 200mW (standard) 200mW (single latching) 360mW (dual latching) Characteristics Dielectric strength 1,000VAC between coil & contacts (50/60 Hz for 1 minute) Terminal choices PCB, SMT Gullwing Packaging / Options - 8 ECbodyREADERS.indd 8 www.components.omron.com 7/14/06 11:21:45 PM Relays - Power PCB NEW! NEW! G5NB General Attributes Dimensions mm (in) 15.3 H x 20.5 L x 7.2 W (0.60 x 0.81 x 0.28) NEW! G5NB-E G5SB G6D-ASI 15.8 H x 20.3 L x 10.3 W (0.62 x 0.80 x 0.41) 12.5 H x 17.5 L x 6.5 W (0.49 x 0.69 x 0.26) 3A/5A 5A(NO)/3A(NC) 5A * High capacity 5A version available * Meets EN tracking resistance CTI>250 * HA version for home appliances * Small compact form for 10 kV impulse and 5A switching capability * Meets EN tracking resistance CTI>250 * High insulation between coil & contact * Impulse withstand of 8kV * Fully Sealed * Incorporates 5A NO contact * Subminiature, slim lightweight design * Low power consumption * Fully Sealed 1 Form A 1 Form A 1 Form A 1 Form A Single button Single button Single button Single button AgNi AgSnIn AgNi/AgSnIn AgNi/AgSnIn (resistive load) 200,000 (resistive): 3A @ 125VAC/30VDC 200,000 (resistive): 3A @ 30VDC 100,000: 5A @ 250VAC For resistive loads: 300,000: 2A @ 30VDC/250VAC 200,000: 3 A (NO)/3 A (NC) at 70,000: 5A @ 30VDC/250VAC 125 VAC; 50,000: 5 A (NO)/3 A (NC) at 125 VAC; 50,000: 5 A (NO) at 250 VAC; 10,000: 3 A (NC) at 250 VAC; 10,000: 5 A (NO)/3 A (NC) at 30 VDC Max. switching capacity (and resistive load) 375VA, 90W 1,250VA, 90W 1,250VA, 150W(NO) 750VA, 30W(NC) 1,250VA, 150W Minimum permissible load (for reference only) 10mA @ 5VDC 10mA @ 5VDC 10mA @ 5VDC 10mA @ 5VDC 5, 12, 18, 24VDC 5, 9, 12, 24VDC 5, 12, 24, 48, 110/120VDC Switching 3A/5A Features Contact Information Contact form Contact type(s) Contact material(s) Electrical service life (@ 1800 ops./hr.) Relays - Power PCB 15.3 H x 20.5 L x 7.2 W (0.60 x 0.81 x 0.28) max. Coil Information Coil voltage 5, 12, 18, 24VDC Power consumption 200mW 200mW 400mW 200mW Insulation class Class A Class B Class B Class B -40 to +70C -40 to +85C -40 to +70C -25 to +70C 10kV 10kV 8kV 6kV 4,000VAC (coil-contact) 750VAC (open contacts) 4,000VAC (coil-contact) 750VAC (open contacts) 4,000VAC (coil-contact) 1,000VAC (open contacts) 3,000VAC (coil-contact) 750VAC (open contacts) PCB PCB PCB PCB Semi-sealed Semi-sealed Semi-sealed Semi-sealed N/A N/A N/A Socket for back connecting, sockets with PCB terminals UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, TUV, SEV Characteristics Operating temperature Impulse withstand voltage (1.2 x 50 sec. unless noted) Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards 9 ECbodyREADERS.indd 9 7/14/06 11:21:49 PM Relays - Power PCB NEW! NEW! G6DS General Attributes Dimensions mm (in) 12.4 H x 20 L x 5.0 W (0.60 x 0.81 x 0.28) G2RG G6B 25.5 H x 29 L x 13 W (1.00 x 1.14 x 0.51) 9.91 H x 20.07 L x 9.91 W (0.39 x 0.79 x 0.39) 5A 8A 8A/5A * Slim 5mm for max. density mounting * Slim 5mm width, & reduced * High sensitive coil option reduces PCB area (103mm2) ideal for power consumption high-density mounting * Meets EN reinforced insulation * Highly efficient magnetic circuit requirement for control equipment for high sensitivity * Fully sealed * UL Class I, Division II approved * Resistant to mechanical shock for hazardous locations * 1.5mm contact gap x 2 poles=3mm total gap meeting UPS standards * Dimensions & mounting holes are same as G2R relay series * Sealed construction, standard * Meets EN tracking resistance CTI > 250 * UL508/CSA 22.2 * Subminiature and low power * Sealed construction standard * Single & dual coil latching available 1 Form A 1 Form A 2 Form A 1 Form A, 2 Form A, 2 Form B 1 Form A + 1 Form B Single button Single button Single button Single button AgNi Ag-Alloy AgSnO2 AgSnO2 100,000: 5A @ 30VDC/250VAC 80,000 (high sensitivity): 5A @ 30VDC/250VAC 100,000: 3A @ 30VDC/250VAC 6,000: 5A @ 250VAC/24VDC 10,000: 8A @ 250VAC 100,000: 5A @ 30 VDC/250VAC 8A @ 30 VDC/250VAC (highcapacity) Max. switching capacity (resistive load) 1,250VA, 150W 750VA, 90W 2,000 VA 1,250VA, 150W 2,000VA, 240W (high-capacity type) Minimum permissible load (for reference only) 5mA @ 24VDC 10mA @ 5VDC 10mA @ 5VDC 10mA @ 5VDC 5, 12, 24VDC 12, 24VDC 5, 6, 12, 24VDC 180mW 120mW (high-sensitivity) 120mW 800mW 200mW (1 pole) 300mW (2 pole) Class B Class B Class B Class A -40 to +85C -40 to +85C -40 to +70C -25 to +70C 6kV 5.08kV 10kV -- 3,000VAC (coil-contacts) 750VAC (open contacts) 3,000VAC, (coil-contact) 750VAC, (open contacts) 5,000VAC, (coil-contact) 3,000VAC, (contacts pole-pole) 1,000VAC (open contacts) 4,000VAC (coil-contact) 2,000VAC (contacts pole-pole) 1,000VAC (open contacts) PCB PCB PCB PCB Fully Sealed Fully sealed Fully sealed Fully sealed Socket for back connecting, sockets with PCB terminals N/A N/A Sockets & clips for back connecting sockets with PCB terminals UL, CSA, VDE UL, CSA, VDE, EN, IEC 61131-2, IEC 61010 UL, CSA, VDE (O700/0110) UL, CSA, (FCC Part 68) SEV, TUV, IEC Switching 5A Features Contact Information Contact form Relays - Power PCB G6M 17.7 H x 20.3 L x 5.08 W (0.70 x 0.80 x 0.20) Contact type(s) Contact material(s) Electrical service life (@ 1800 ops./hr.) (resistive load) Coil Information Coil voltage 5, 12, 24VDC Power consumption Insulation class Characteristics Operating temperature Impulse withstand voltage (1.2 x 50 sec. unless noted) Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards 10 ECbodyREADERS.indd 10 7/14/06 11:22:05 PM Relays - Power PCB NEW! G6RN General Attributes Dimensions mm (in) 15 H x 28.5 L x 10 W (0.59 x 1.12 x 0.39) Switching 8A NEW! G5LE/-E G5LB/-25 G5Q 19 H x 22.5 L x 16.5 W (0.75 x 0.89 x 0.65) 15.2 H x 19.6 L x 15.6 W (0.60 x 0.77 x 0.61) 15.8 H x 20.3 L x 10.3 W (0.62 x 0.80 x 0.41) 10A 10A (NO contacts) * Small "sugar cube" size used as common platform * Sealed construction optional * High capacity contacts:-E *Increased (0.8) contact gap:-G8 * Special application versions available * Sealed construction optional * 10A switching in low profile "sugar cube" package * Optional -25 type meets stringent EU requirements, including tracking resistance CTI > 250 & extended life * 4.5kV impulse withstand * Low power consumption * Compact PCB relay with high insulation * Withstands impulse of 8kV coil-contacts * Meets EN tracking resistance CTI >250 * Class F coil insulation standard * Low power consumption 1 Form A, 1 Form C 1 Form A, 1 Form C 1 Form A, 1 Form C 1 Form A, 1 Form C Single button Single button Single button Single button AgNi +gold plating AgSnO2 /AgSnIn (either with gold plating option) AgSnO2 AgNi Electrical service life (@ 1800 ops./hr.) (resistive load) 100,000: 8A @ 250VAC 5A @ 30VDC 100,000: 100,000: 13A @ 120VAC (@ 85C/87C) 10A @ 120VAC/250VAC 5A @ 250 VAC (AgSnO2) 8A @ 30VDC 6 FLA, 6 LRA @ 120VAC @ 85C TV-5 @120VAC 50,000: 10A @ 250VAC 50,000 16A @ 250VAC 1/8 HP @ 120 VAC (@ 85C) 30,000: 12A @ 120VAC 200,000: 3A (NO)/3 A (NC) @ 125VAC 100,000: 3A (NO)/3 A (NC) @ 250VAC 5A (NO)/3 A (NC) @ 30VDC 50,000: 10A (NO) @125VAC (900 ops. per hour) Max. switching capacity (resistive load) 2,000VA,150W 1,200VA,240W 1,200VA, 240W 2,500VA, 240W (-25 type) 1,250VA,150W (NO) 375 VA, 90W (NC) Minimum permissible load (for reference only) 10mA @ 5 VDC 100mA @ 5VDC, 100mA @ 5VDC 10mA @ 5VDC 5, 6, 9, 12, 24, 48VDC 3, 5, 6, 9, 12, 24, 36, 48VDC 5, 12, 24VDC 220mW, 250mW (DC24/48) 400mW /360mW available 360mW (standard) 400mW ("-40" style) 600mW ("-60" style) 400mW Form C 200mW Form A Class B Class B, F (UL/CSA ONLY) Class B, F (-25 type) Class F -40 to +85C -40 to +85C -40 to +85C -40 to +105C -- 4.5kV 4.5kV 8kV 4,000VAC (coil-contact) 1,000 (open contacts) 2,000VAC (coil-contact) 750VAC (open contacts) 2,000VAC (coil-contact) 750VAC (open contacts) 4,000VAC (coil-contact) 1,000VAC (open contacts) PCB PCB PCB PCB Sealed Standard: Semi-sealed/vented, Option: sealed Standard: Semi-sealed/vented, Option: sealed Standard: Semi-sealed/vented, Option: sealed N/A N/A N/A N/A UL, CSA, VDE UL, CSA, TUV, VDE UL, CSA, VDE UL, CSA, VDE Contact Information Contact form Contact type(s) Contact material(s) Relays - Power PCB 10A (16A for Semi-sealed "E" type) * 8 mm coil/contact creepage * Low profile * Sealed construction standard * Ideal for switching contactors, solenoids & motors Features Coil Information Coil voltage 5, 6, 12, 24, 48VDC Power consumption Insulation class Characteristics Operating temperature Impulse withstand voltage (1.2 x 50 sec. unless noted) Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards 11 ECbodyREADERS.indd 11 7/14/06 11:22:22 PM Relays - Power PCB NEW TYPES G6C General Attributes Dimensions mm (in) 9.91 H x 20.07 L x 14.99 W (0.39 x 0.79 x 0.59) Switching 10A Relays - Power PCB Features Contact Information Contact form * Low power consumption for high power switching * Low profile 10A power relay * Single & dual coil latching types available * Sealed construction available * Meets EN tracking resistance CTI > 250 G5CA G5PA-1 G8PT 11 H x 16 L x 22 W (10A) (0.43 x 0.63 x 0.87) 11 H x 22 L x 25 W (15A) 25 H x 24 L x W 10 (0.985 x 0.95 x 0.40) Multiple, refer to catalog. Basic: 20.1(H)x 32.1(L) x 27.7(W) 10A (15A high capacity) 5A (10A option) 30A (SPST) 10A-30A (SPDT) * Fully sealed or flux-sealed * High capacity versions * High sensitivity types * PCB or PCB+QC versions * Ideal for TVs, tuner, & audio power supply switching, both front panel and remote controlled. Also auxiliary switched power outlets on tuners and TVs. * A variety of versions in a single standard package meet most UL/FCC power isolation requirements * Rated to 100A inrush @ 250 VAC for minimum 40,000 operations * Industry standard form with 30A switching * UL Class F insulation standard * Wide range of coil ratings * Various sealing forms: open frame, vented/flux sealed, fully sealed * UL508/UL873 Column A spacings * Meets EN Tracking resistance CTI > 175 * High dielectric at open contacts 1 Form A + 1 Form B, 1 Form A 1 Form A 1 Form A 1 Form A, 1Form C Single button Single button Single button Single button Ag-Alloy AgSnIn AgSnO2 AgSnIn (other alloys available) 100,000: 10A @ 30VDC/250VAC 100,000: 10A @ 30VDC 15A @ 110VAC (high capacity) 10A @ 250VAC (fully sealed, std) 300,000: 10A @ 250VAC (semi-sealed) 30,000: 54@277 VAC 5A @ 30VDC / 277VAC (high capacity type) 25,000: TV-5 TV-8 (optional) 6,000: 5A @ 30VDC 100,000: 10A @ 250 VAC (high-capacity type) 100,000: 30A @ 277VAC (NO) 50,000: 30A @ 277VAC (NC) Consult catalog for other ratings Max. switching capacity 2,500VA, 300W (resistive load) 2,000VA, 240W (latching) 2,500VA, 300W N/A 1 Form A: 7,500VA, 560W Minimum permissible load (for reference only) 10mA @ 5VDC 100mA @ 5VDC 10mA @ 5 VDC 500mA @ 5VDC 3, 5, 6, 12, 24VDC 5, 12, 24VDC 5, 6, 9, 12, 24 VDC (4.5 VDC non-standard) 5, 9, 12, 24, 48, 110VDC Other coil voltages available 200mW (monostable & single coil latching) 280mW (dual coil latching) 200mW (standard & high capacity) 150mW (high sensitivity) 250mW 530mW (high capacity, extended electrical life) 150mW (under development) 900mW Class A Class B Class B Class F -40 to +70C -25 to +70C -40 to +70C -55C to +105C 4.5kV 4.5kV 10kV 12kV 6kV 2,000VAC (coil -contact) 2,000VAC (contacts pole-pole) 1,000VAC (open contacts) PCB, self clinching 2,500VAC (coil-contact) 1,000VAC (open contacts) 4,000VAC (coil-contacts) 1,000VAC (open contacts) 2,500VAC, (coil-contact) 1,500VAC, (open contacts) PCB Optional: PCB+quick-connect contact terminals PCB PCB (optional self-clinching) PCB coil /quick connect contact Flange mount all quick connect Semi-sealed Fully sealed option Semi-sealed Fully sealed option Semi-sealed Open frame, Vented/semi-sealed, Fully sealed Socket for QC contact terms., PCB terms., socket clip N/A N/A N/A UL, CSA, VDE, SEV UL, CSA, SEV, SEMKO, IEC/TUV UL, CSA, SEMKO TUV, VDE UL, CSA, VDE Contact type(s) Contact material(s) Electrical service life (@ 1800 ops./hr.) (resistive load) Coil Information 1 Form C: 5000/2500VA, 560W/280W* Coil voltage Power consumption Insulation class Characteristics Operating temperature Impulse withstand voltage (1.2 x 50 sec. unless noted) Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards 12 ECbodyREADERS.indd 12 * N.O. Contact / N.C. Contact 7/14/06 11:22:28 PM Relays - Power PCB NEW! G2R General Attributes Dimensions mm (in) G2RL NEW! G5RL G2RL-TP 15.5 H x 29 L x 12.7 W (0.61 x 1.14 x 0.50) 15.7 H x 28.8 L x 12.5 W (0.61 x 1.14 x 0.49) 15.7H x 40.4 L x 12.5 W (0.61 x 1.60 x 0.49) 16A max. 16A max. 16A max. (NO), 5A max. (NC) 16A max. Features * High dielectric withstand * 8mm coil/contact spacing * 1 & 2 pole models * 3mm contact gap version available (see G2RG) * Meets EN tracking resistance CTI > 250 * Low profile for power rating * High isolation * Class F insulation option * Low power consumption * Quick connect terminal option * Meets EN tracking resistance CTI > 250 * High dielectric due to large internal creepage distances. * AC coil in industry standard package * Increased temperature & insulation ratings in low profile package. * Simplifies PCB design by allowing removal of high power PCB tracings. * Contact/load terminals in both 5mm for RAST5 connection & 7.5mm existing standard * Single mounting/soldering process for both types of terminals reduces PCB assembly costs. Contact Information Contact form 1 Form A, 1 Form C, 2 Form A, 2 Form C 1 Form A, 1 Form C, 2 Form A, 2 Form C 1 Form C 1 Form A Single button, bifurcated button Single button (bifurcated available) Single button Single button Ag alloy AgSnO2 (1 pole); AgNi (2 pole) AgSnIn Ag alloy Electrical service life (@ 1800 ops./hr.) (resistive load) 100,000: (high-capacity type) 16A @ 30VDC/250VAC Consult catalog for other ratings 100,000: 16A @ 250VAC 6,000: 25A @ 240VAC Consult catalog for other ratings 50,000: 16A @ 24VDC/277VAC (NO) 25,000: TV-5 (NO) 50,000: 16A @ 24VDC/277VAC 20A @ 24 VAC (@ 85C) 25,000: TV-5 Max. switching capacity (resistive Load) 4,000VA, 480W (high-capacity 1 pole) Consult catalog for other ratings 4,000VA, 384W (high-capacity 1 pole) Consult catalog for other ratings 4,000VA, 384W (NO) 1,250VA, 120W (NC) 4,000VA, Minimum permissible load (@1800 ops./hr.) 1 pole: 100mA @ 5VDC; 2 pole: 10mA @ 5VDC 40mA, 24VDC 40mA @ 24VDC Switching Contact type(s) Contact material(s) Coil Information Coil voltage -- 12, 18, 24, 48, 50, 100, 110/120, 5, 12, 24, 48VDC 110, 120, 200/220, 220, 230, 240VAC 5, 6, 9, 12, 18, 24, 48,60, 100, 110VDC 24, 100, 115/120, 200, 230/240 VAC 12, 24VDC 5, 12, 24, 48VDC Consult catalog for other coil voltages 0.9VA, 530mW (standard) 360mW (high sensitivity) 850mW (latching set), 600mW (latching reset) 400mW (430mW for 48VDC) 0.75VA 400mW (430mW @ 48VDC) 400mW (430mW for 48VDC) Class B available Class F -- Class F Characteristics Operating temperature -40 to +70C (+85C option) -40 to +85C -40 to +70C (AC coil) -40 to +85C (DC coil) -40 to +105C Impulse withstand voltage (1.2 x 50 sec. unless noted) 10kV 10kV 10kV 10kV 5,000VAC (coil-contact) 1,000 VAC (open contacts) 5,000VAC (coil-contact) 1,000 VAC (open contacts) 6,000VAC (coil-contact) 1,000VAC (open contacts) 5,000 VAC, (coil-contact) 1,000 VAC, (open contacts) PCB, plug in quick-connect (flange mount) PCB, optional quick-connect contact terminals (-TP type) PCB PCB (coil terminals) Quick-connect (contact terminals) Semi-sealed Fully sealed option Semi-sealed Fully sealed option Semi-sealed Semi-sealed N/A N/A N/A N/A UL, CSA, SEV SEMKO, VDE, TUV UL, CSA, VDE UL, CSA, VDE UL, CSA, EN 60335 Power consumption Insulation class Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards Relays - Power PCB 25.5 H x 29 L x 13 W (1 x 1.14 x 0.51) 13 ECbodyREADERS.indd 13 7/14/06 11:22:44 PM Relays - DC Power The switching and driving sections are isolated, gas injected and hermetically sealed. This advanced construction requires no arc space, saves space, & helps ensure safety. General Attributes G9EA Model G9EA-1(-B) G9EC G9EA-1(-B)-CA G9EB (-1B) G9EC-1(-B) High-current conduction Switching/current conduction Switching/current conduction Smallest in series 250VDC, 25A loads Largest capacity in series Carries/switches 400V, 200A loads SPST-NO SPST-NO SPST-NO Double-break, single Double-break, single Double-break, single 10m max. (0.3m typical) 30m max. 30m max. (0.2m typical) 0.1V max. (for a carry current of 100A) 0.1V max (for a carry current of 25A) 0.1V max. (for a carry current of 200A) 400VDC, 30A, 1,000 operations min. 120VDC, 30A, 2,500 operations min. 250VDC, 25A, 30,000 operations min. 400VDC, 200A, 3,000 operations min. 30A 25A 200A 100A 25A 200A Short-time carry current 100A (10 min.) 150A (10 min.) 50A (5 min.), 40A (10min.) 300A (15min.) *Max. interruption current 600A @ 300VDC (5 times) -- 100A @ 250VDC (5 times) 1,000A @ 400VDC (10 times) 100A @ 120VDC (150 times min.) 50A @ 250VDC (50 times min.) 700A @ 400VDC (40 times min.) -- -200A @ 200VDC (1,000 times min.) 12, 24, 48, 60 & 100VDC 12, 24, 48, 60 & 100VDC 12, 24, 48, 60 & 100VDC Approx. 5 to 5.4W Approx. 2W Approx. 11W 200,000 operations min. 100,000 operations min. 200,000 operations min. Insulation resistance Between Coil & Contacts 1,000M min. 1,000M min. 1,000M min. 1,000M min. Between contacts of the same polarity 1,000M min. 1,000M min. 1,000M min. 1,000M min. Dielectric strength Between coil & contacts 2,500VAC for 1min. 2,500VAC for 1min. 2,500VAC for 1min. 2,500VAC for 1min. Between contacts of the same polarity 2,500VAC for 1min. 2,500VAC for 1min. Classification Switching/current conduction Carries 100A Features Standard compact model carries/switches 400VDC, 60A loads Low contact resistance when carrying current Contact Information Contact Form SPST-NO Contact structure Double-break, single Contact resistance 30m max. (0.6m typical) Switching voltage drop 0.1V max. (for a carry current of 60A) Relays - DC Power G9EB *Electrical endurance 120VDC, 100A, 3,000 operations min. 400VDC, 60A, 3,000 operations min. 400VDC, 30A, 30,000 operations min. Max. switching current 100A Rated carry current 60A *Overload interruption 180A @ 400VDC (100 times min.) Reverse polarity -60A @ 200VDC (1,000 times min.) -- interruption Coil Information Rated voltage 12, 24, 48, 60 & 100VDC Power consumption Approx. 5 to 5.4W Mechanical endurance 200,000 operations min. 2,500VAC for 1min. 2,500VAC for 1min. 4,500V 4,500V 4,500V -40 to +70C (with no icing or condensation) -40 to +70C (with no icing or condensation) -40 to +50C (with no icing or condensation) Terminals Screw terminals Yes Yes Yes Yes Lead wire output Yes Yes Yes Yes Impulse withstand voltage 4,500V Ambient operating -40 to +70C temperature (with no icing or condensation) *When using a varistor as protective circuit against reverse surge in the relay coil 14 ECbodyREADERS.indd 14 7/14/06 11:22:49 PM Relays - General Purpose MY4H General Attributes Dimensions mm (in) 35 H x 28.5 L x 22 W (1.38 x 1.12 x 0.87) MK MY LY 36 H x 28 L x 21.5 W (1.42 x 1.10 x 0.85) 35.56 H x 27.94 L x 21.59 W (1.40 x 1.10 x 0.85) 10 A max. 10A (2 pole); 5 A (4 pole) 15A * Full hermetic seal for hazardous applications * UL Class1, Division II approved * Signal level switching option using bifurcated contacts * Octal base plug-in * Exceptional reliability * Push-to-test button standard * CENELEC conformity * Exceptional reliability * Push-to-test button standard * Arc barrier built into 4 pole * Built in diode (DC) or C/R Circuit * Name plate and mechanical indicator, standard * Compact power relay * LED, Push-to-test button, bifurcated contacts and other features available * Space efficient power switching * Extended life to 500,000/200,000 operations 4 Form C 2 Form C, 3 Form C 2 Form C, 4 Form C 1 Form C, 2 Form C, 3 Form C, 4 Form C Single button, bifurcated button Single button Single button, bifurcated button Single button, bifurcated AgSnIn Ag (fine silver) AgNi Ag-Alloy 100,000 min. 3A@24VDC/110VAC (50,000 min. bifurcated) 100,000 min. 10A @ 28VDC/250VAC 2P 500,000: 5A @ 30VDC/250VAC 4P 200,000: 3A @ 30VDC/250VAC 100,000: 3A@30VDC/250VAC (bifurcated) 200,000 min: 15A @ 24VDC/110VAC 10A @ 24VDC/110VAC 500,000 min: (2 pole) 10A @ 110VAC Max. switching capacity (resistive load) 330VA, 72W 2,500VA, 280W 2,500VA, 300W 1,250VA, 150W (4-pole) 1,700VA, 360W (1 pole) 1,100VA, 240W (2, 3, 4 pole) 550VA, 120W (bifurcated) Minimum permissible load (@1800 ops./hr.) 100A @ 1VDC for MY4H 100A @ 100mVDC for MY4ZH (Bifurcated contacts) 100mA @ 1VDC 2 pole: 1mA @ 5VDC 4 pole: 1mA @ 5VDC 10A @ 1 VDC (bifurcated contacts) 100mA @ 5VDC 10mA @ 5VDC (bifurcated contacts) 12, 24, 110/120, 220/240VAC; 12, 24, 48, 100VDC 6, 12, 24, 48, 110/120, 220/240 VAC; 6,12, 24, 48, 100/110VDC 12, 24, 110/120, 220/240VAC, 12, 24, 48, 100VDC 900 mW; 0.9 - 1.1VA 2.7VA, 1.5W AC Coil: 0.9 to 1.2VA DC Coil: 0.9W 1.1VA, 0.9W (1 pole); 1.1VA, 0.9W (DPDT); 1.6VA, 1.4W (3PDT); 1.95VA, 1.5W (4PDT) -- N/A Class A Class A -25C to +60C -10C to +40C -55C to +70C -25C to +70C -- -- -- -- 1,000VAC (coil-contact) 1,000VAC (contacts pole pole) 700VAC (open contacts) 2,500VAC (coil-contact) 1,000VAC (open contacts) 2,000VAC (coil-contact) 1,000VAC (open contacts) 2,000VAC (coil-contact) 1,000VAC (open contacts) Plug-in Plug-in PCB, plug-in Track mounted socket PCB with .187/.250 QC Unsealed, semi-sealed Switching 3A Features Contact Information Contact form Contact type(s) Contact material(s) Electrical service life (@ 1800 ops./hr.) (resistive load) Coil Information 24, 110/120VAC Coil voltage 12, 24VDC Power consumption Insulation class Characteristics Operating temperature Impulse withstand voltage (1.2 x 50 sec. unless noted) Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards Hermetic seal Unsealed Unsealed PYF14A-E Socket PYC-A1 Clip Sockets & clips for track mount sockets with screw terminals, & back connecting sockets with solder & PCB terminals Sockets & clips for track mount sockets with screw terminals, & back connecting sockets with solder & PCB terminals. Note: PYF-S series screwless clamp terminal socket available Mounting rails= PFP Sockets & clips for track mount sockets with screw terminals, & back connecting sockets with solder & PCB terminals UL, CSA UL, CSA, TUV, VDE, SEMKO UL, CSA, SEV, CE, VDE, IMA UL, CSA, SEV, VDE, CE (UL, CSA only with varistors) Relays - General Purpose 52.58 H x 34.54 L x 34.54 W (2.07 x 1.36 x 1.36) 15 ECbodyREADERS.indd 15 7/14/06 11:22:57 PM Relays - General Purpose NEW! G2RV General Attributes Dimensions mm (in) 91.0 H x 94.0 L x 6.1 W (3.58 x 3.7 x 0.24) Relay & terminal block Switching 6A max. Relays - General Purpose Features G2R-S (S) G7J G7L 35.5 H x 29 L x 13 W (1.40 x 1.14 x .51) 64 H x 53.5 L x 34.5 W (2.52 x 2.11 x 1.36) 49.02 H x 68.58 L x 34.54 W (1.93 x 2.70 x 1.36) 1 pole: 10A max. 2 pole: 5A max. 25A max. 30A max. * Variety of contact forms * Ideal for 3 phase motor control * 4 pole mini contactor * DIN rail mountable * Minimal chattering * UL94V-0 * Reliable high power relay * 3 mm contact gap * Conforms to IEC 950/UL 1950 * Class B insulation standard * Most cost effective solution in its class. * Ideal for pump, motor loads * Nameplate and mechanical flag * Slimmest control relay available indicator standard * Capable of switching both electrical * LED diode, and lockable test control loads (6A) and signal level button option available loads (1mA) * Socket mount 10A relay (1-pole) * Relay available separately * Sealed for unprotected environments Contact Information Contact form 1 Form C 1 Form C 2 Form C 4 Form A, 3 Form A/1 Form B, 2 Form A/2 Form B 1 Form A-(Double Make) 2 Form A-(Double Make) Contact type(s) Crossbar Single button, bifurcated crossbar Single button Single button Ag Alloy Ag Alloy Ag Alloy Ag Alloy 6,000: 6A @ 30 VDC /250VAC 100,000 min. (at rated loads) 100,000 min. (at rated loads) 100,000 min. (at rated loads) (see data sheet for more information) (see data sheet for more information) (see data sheet for more information) 1,500VA, 18W (resistive load) 2,500VA, 300W (1-pole resistive load) 5,500VA, 750W (NO contacts) 1,760VA, 240W (NC contacts) 4,400VA 5mA @ 5VDC 100mA @ 5VDC , 10mA @ 5VDC (2 pole) 100mA @ 24VDC 100mA @ 5VDC 6, 12, 24, 48VDC; 24, 110 120, 230, 240VAC 6, 12, 24, 48, 100/110VDC; 6, 12, 24, 50, 100/120, 200/240VAC 12, 24, 48, 100VDC; 12, 24, 100/120, 200/240VAC Contact material(s) Electrical service life (@ 1800 ops./hr.) (resistive load) Maximum switching capacity Minimum permissible load (@1800 ops./hr.) 12, 24, 48VDC Coil Information Coil voltage 24, 48, 110, 230VAC Power consumption 300mW 0.9VA, 0.53W 1.8 to 2.6VA, 2.0W 1.7 to 2.5VA, 1.9W Insulation class Class A Class A Class A, Class B (available) Class B -40C to +60C -40 to +70C -25C to +60C -20C to +85C 6kV 8kV 10kV (coil-contacts) 10kV (coil-contacts) 4,000VAC (coil-contacts) 1,000VAC (open contacts) 1 pole: 5,000VAC (coil-contacts) 1,000VAC (open contacts) 2 pole: 5,000VAC (coil-contacts) 3,000VAC (different polarity) 1,000VAC (open contacts) 4,000VAC (coil-contacts) 4,000VAC (different polarity) 2,000VAC (open contacts) 4,000VAC (coil-contacts) 2,000VAC (different polarity) 2,000VAC (open contacts) Quick-connect, screw, PCB Quick-connect, screw, PCB Characteristics Operating temperature Impulse withstand voltage (1.2 x 50 sec. unless noted) Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards Plug-in Relay: Quick-connect Socket: screw terminals, push-in wire connections (sold separately) Semi-sealed Unsealed Unsealed Semi-sealed Unsealed Semi-sealed Socket: G2RV-SL (UL 508) SSR Option: G3MB / G3MC Sockets for track mount, sockets with screw terminals, & back connecting sockets with solder & PCB terminals. Note: P2RF-S series screwless clamp terminal socket available. SSR option: G3R. R99-04V for G5D W-bracket R99-07G5D E bracket; P7LF-D adapter; P7LF-06 front connecting socket UL, CSA UL, CSA, VDE, IEC, LR, CE UL, CSA, TUV, CE, IEC UL, CSA, TUV, CE, VDE available 16 ECbodyREADERS.indd 16 7/14/06 11:23:10 PM Relays - General Purpose NEW! G7Z General Attributes Dimensions mm (in) 84 H x 62 L x 45 W (3.31 x 2.44 x 1.77) MGN MJN Short Base: 55.88 H x 63.50 L x 63.50 W (2.20 x 2.50 x 2.50) Long Base: 60.45 H x 84.33 L x 63.50 W (2.38 x 3.32 x 2.50) 48.38 H x 35.56 L x 38.73 W (1.91 x 1.40 x 1.53) 30A max. 10A, 20A, 30A (UL ratings) * Each pole able to switch and carry 40A in parallel * Capable of switching up to 160A * Reduced power consumption & size * Low noise * Safety function included as standard * Optional auxiliary contact block enables concurrent signal (1mA) switching * 30 Amp heavy duty power relay * Class F coil insulation system for 155C (total temperature) * Coil molded in DuPont Rynite(R) for environmental protection * Rugged construction rivets terminals to base * Magnetic blow-out option * Rugged power driver offers superior 3/16" through-air & 3/8" over-surface spacing * Interlocked frame & contact block prevent contact misalignment during plug-in * Indicator lamp, push-to-operate options * 10A-30A in same package * Continous duty at 125% coil voltage 4A, 3A/1B, 2A/2B 1 Form A, 1Form B, 1Form C, 2 Form A, 2 Form C (long base) 1 Form C, 2 Form C, 3 Form C (monostable); 1 Form C, 2 Form C (latching/unlatching) Bifurcated Crossbar Single button Single button AgSnIn 5/16" diameter AgCdO2 3/16" diameter AgCdO2 100,000: 5A @ 110VDC (at 1,2000 ops/hr) 80,000: 40A @ 440VAC 100,000 min. 30A @ 28VDC/240VAC 100,000 min. 10A @ 28VDC/240VAC 20A @ 28VDC/277VAC 30A @ 28VDC Max. Switching Capacity (resistive load) 17,600VA, 550W 440VA, 110W (auxiliary contact block) N/A N/A Minimum permissible load (@1800 ops./hr.) 2A @ 24VDC <1mA @ 5VDC (auxiliary contact block) N/A N/A 12, 24VDC 6, 12, 24, 120, 240, 480VAC; 6, 12, 24, 48, 110VDC 6, 12, 24, 120VAC 5, 6, 12, 24, 48, 110VDC 3.7W 9.5VA nominal; 2W nominal AC 1.7VA (1, 2PDT) 2.0VA (3PDT DC 1.2W Class B Class F Class A Characteristics Operating temperature -25C to +60C At 30Amps: -45C to +80C (AC coil) -45C to +115C (DC coil) -45C to +60C (1 & 2 pole AC coil), + 70C (DC coil) -45C to +45C (3 pole AC coil) -45C to +70C (3 pole DC coil) Impulse withstand voltage (1.2 x 50 sec. unless noted) 10kV (coil to contacts or different polarity) 4.5kV (open contacts) N/A N/A 4,000VAC (coil-contacts) 4,000VAC (different polarity) 2,000VAC (open contacts) 2,200Vrms, 60Hz between contacts; 2,200Vrms, 60Hz between other elements 750VAC, rms 60Hz across open contacts; 2,500VAC, rms 60Hz all other mutually insulated elements Screw Screw Quick-connect plug-in Unsealed, fully sealed None Semi-sealed Auxiliary Contact Block (2 poles of 4 poles) Signal level switching capability (2 poles of 4 poles) Aluminum dust cover - sealed knock-out holes for standard conduit fittings. Relay mounts on pre-drilled base. Snap action cover release 127 W x 76.20 H x 101.60 D (5 x 3 x 4) PTF11PC Socket; PTF11QDC Socket; PTF21PC Socket; PTFPCB Socket; PYMJN-PCB Retaining Clips; PYMJN-S Retaining Clips UL, CSA, TUV, VDE UL UL, CSA Switching 40A max. (160A max. in parallel) Features Contact Information Contact form Contact material(s) Electrical service life (@ 1800 ops./hr.) (resistive load) Coil Information Coil voltage Power consumption Insulation class Dielectric strength (50/60 Hz for 1 minute) Terminal choices Protection level Accessories Approved standards Relays - General Purpose Contact type(s) (see: Electrical service life) 17 ECbodyREADERS.indd 17 7/14/06 11:23:25 PM Relays - Solid State SIP G3MB General Attributes Dimensions mm (in) G3MC DIP G3R I/O G3DZ 13.5 H x 24.5 L x 4.5 W (0.53 x 0.96 x 0.18) Input & Output modules: 28 H x 29 L x 13 W (1.10 x 1.14 x 0.51) 12.5 max. H x 18.5 L x 6.5 W (0.49 x 0.73 x 0.26) max. 2A @ 240VAC Input module: 100mA; Output module: 2A 0.6A @ 240VAC * Space saving SIP design * Industry standard footprint * Monoblock construction results in ultimate reliability *Reduced height thin profile SIP * Ideal for close PCB mounting * Monoblock construction results in ultimate reliability * Industry standard footprint * 4 kV insulation * Operation indicator standard * Interchangeable with G2R electromechanical relay * Ideal for DIN rail mount I/O operations * AC/DC & AC half-wave switching with one model * 10A max. leakage current * Matches G6D form factor -30C to +80C -30C to +80C -30C to +80C -30C to +85C 5, 12, 24VDC 5, 12, 24VDC Input module: 5VDC; 6.6-32VDC; 60-264VAC; Output module: 4-32VDC 5, 12, 24VDC 75-264VAC 75-264VAC Input module: 4-32VDC; Output module: 75-264VAC, 4-200VDC 5, 12, 24VDC 1.5mA (at 200VAC) 1.5mA (at 200VAC) Input Module: 5A Output Module: 1.5mA (AC) 1mA (DC) 10A (at 125VDC) Isolation Phototriac Phototriac Photocoupler, Phototriac Phototriac Dielectric strength (50/60Hz for 1 min.) 2,500VAC 2,500VAC 4,000VAC 2,500VAC Zero crossing Optional Yes Input module: No; Output module: Yes No Snubber circuit Optional Yes Input module: No; Output module Yes (Built-in Varistor) 100,000 hours 100,000 hours 100,000 hours 100,000 hours Mounting PCB PCB Socket PCB or Socket Terminal PCB PCB Plug-in PCB 20.5 H x 24.5 L x 5.5 W (0.81 x 0.96 x 0.22) Switching 2A @ 240VAC current (resistive) Features Operating temperature Operating input Relays - Solid State DIP SIP Output voltage Leakage Current (max.) Life (MTTF) UL, CSA, TUV UL, CSA, VDE UL, CSA, TUV UL, CSA Equivalent Omron EMR footprint G2RV similar for terminal block G2RV similar for terminal block G2R G6D, G6DS Optional heat sink N/A N/A N/A N/A Socket N/A N/A P2RF-05E P6D-04P Approvals 18 ECbodyREADERS.indd 18 7/14/06 11:23:32 PM Relays - Solid State SIP G3S/G3SD General Attributes Dimensions mm (in) SIP SIP G3CN SIP G3M G3TB 20 H x 40 L x 9 W (0.79 x 1.58 x 0.35) Input module: 20.5 H x 43.5 L x 10 W (0.81 x 1.70 x 0.39) Output module: 30.5 H x 43.5 L x 10 W (1.20 x 1.70 x 0.39) 2A, 3A, @ 53VDC, 26VAC 2, 3A, 5A @ 250VAC Input module: 25mA @ 4 to 32VDC Output module: 3mA max. @ 5 to 48VDC 3mA max. @ 100 to 240 VAC 1.5 max. @ 48 to 200 VDC * AC and DC models available * Socketable * Heatsink, available * Interchanges with G6B SPST electrical mechanical relay * Flat & vertical packages * Ideal for FA & OA equipment * Multi-input SSR * Space-saving SIP design * Ideal for high density Power PCB applications * High current switching capability * Color-coded input & output modules * Industry standard footprint * 4kV dielectric strength * LED indicator -30C to +80C -30C to +80C -30C to +80C -30C to +85C Operating input 5, 12, 24VDC 5, 12, 24; 3~28VDC 5, 12, 24VDC Input module: 80-264VAC, 3-32VDC; Output module: 3-32VDC Output voltage 5, 12. 24VDC 75~264VAC 3~53VDC 75-264VAC Input module: 4-32VDC; Output module: 75-264VAC, 4-200VDC 2mA (G3S) 0.1mA @ 26VDC (G3S) 2.5/5mA Input module: 100A max. 2mA @ 100VAC/5mA @ 200VAC (2Amp versions) Output module: 5mA @ 200VAC (AC) 1.5mA @ 200VAC (3 & 5 Amp versions) 1mA max. (DC) Phototriac (G3S) Photocoupler (G3SD) Phototriac Photocoupler Phototriac Photocoupler 2,500VAC 2,500VAC 2,000VAC (2A versions) 2,500VAC (3A and 5A versions) 4,000VAC No Optional Optional Input module: No; Output module: Yes Yes (Built-in Varistor) No Yes Input module: No; Output module: Yes Life (MTTF) 100,000 hours 100,000 hours 100,000 hours 100,000 hours Mounting PCB or Socket PCB PCB PCB PCB PCB PCB PCB UL, CSA UL (114), CSA (22.2) UL, CSA, TUV UL, CSA Equivalent Omron EMR footprint G6B N/A N/A N/A Optional heat sink Y92B-S08N N/A N/A N/A P6B-04P (PCB) N/A N/A N/A Switching 1A @ 240VAC current (resistive) (1.2A, G3S-PD & heatsink) (max.) (1.1A, G3SD-PD & heatsink) Features Operating temperature Leakage Current (max.) Isolation Dielectric strength (50/60Hz for 1 min.) Zero crossing Snubber circuit Terminal Approvals Socket Relays - Solid State 26H x 33H x 14 W (1.04 x 1.30 x .55) max. 16.5 H x 20 L x 10 W (0.65 x 0.79 x 0.39) 19 ECbodyREADERS.indd 19 7/14/06 11:23:38 PM Relays - Solid State SIP Quick Connect G3TC General Attributes Dimensions mm (in) G3NE G3NA G3PA/B 11.5 H x 47 L x 37.5 W (0.45 x 1.90 x 1.50) 27 H x 58 L x 43 W (1.06 x 2.28 x 1.69) Consult Omron 20A max.@ 240VAC (264VAC max.) Versions range from 10A to 90A max. (when using heat sink) up to 45A * Color-coded modules * Industry standard footprint * Built-in anchor screw * Optical isolation - Dielectric 4kV * Zero cross on AC output modules * High capacity * Panel Mount * Quick-connect terminals * Ideal for industrial controls & commercial cooking * "Hockey Puck" standard * Operation indicator standard * Built-in heat sink increases life and reliability * Voltage turn-on at zero crossing reduces initial inrush load currents * LED indicator when control power applied -30C to +80C -30C to +80C -30C to +80C -30C to +80C Input Module: 5, 12, 24VDC 90-140VDC/AC, 180-280 VDC/AC, 10-32VDC/AC Output Module: 5, 15, 24VDC 4-32VDC; 75-264VAC 12-24VDC Input Module: 4.5-6VDC, 12-18VDC, 20-30VDC Output Module: 75-140 VAC, 75-280VAC, 5-60 VDC, 5-200VDC 75-264VAC 19 - 264VAC 180 - 528VAC 4 - 220VDC (10A model) 400 - 600VAC (10, 25, 50A models) 75 - 264VAC 180 - 528VAC 2mA (at 100VAC) 5mA (at 200VAC) 5mA @ 100VAC 10mA @ 200VAC 20mA @ 400VAC 10mA @ 200VAC 20mA @ 400VAC AC Input, DC Input, DC Output: Photocoupler AC Output: Phototriac Phototriac Phototriac, Photocoupler Phototriac 4,000VAC 2,000VAC 2,500VAC 4000VAC (75 and 90A models) G3PA: 4,000VAC G3PB: 2,500VAC Zero crossing Yes (AC output modules only) Optional Yes Yes Snubber circuit Yes (AC output modules only) Yes (built in varistor) Yes Yes Life (MTTF) 100,000 hours 100,000 hours 100,000 hours 100,000 hours PCB with anchor screw Plug-in Panel Panel, DIN PCB Quick connect Screw Screw UL, CSA, TUV, CE UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV, VDE Equivalent Omron EMR footprint N/A N/A N/A N/A Optional heat sink N/A Y92B-N50, -N100 Y92B-A Socket N/A Mounting plate Mounting plate 31.8 H x 43.2 L x 15.2 W (1.25 x 1.7 x 0.6) Switching Input Module: current (resistive) 12mA, 15mA, or 18mA (max.) (depending on model) Output Module: 3A (1A on DC output models rated< 200VDC) Features Relays - Solid State Quick Connect Operating temperature Operating input Output voltage Leakage Current (max.) Isolation Dielectric strength (50/60Hz for 1 min.) Mounting Terminal Approvals Input Module: 100A AC Output Modules: 5mA @ 240VAC 2.5mA @ 120VAC DC Output Modules: 1mA , -B , -P N/A PFP-xxx 20 ECbodyREADERS.indd 20 7/14/06 11:23:44 PM Sockets Back Connecting Sockets Track Mount Sockets Relay Type Solder terminals PCB terminals P2RF-05 P2RF-05-E P2RF-05-S P2R-05A P2R-05P G2R-2-S P2RF-08 P2RF-08-E P2RF-08-S P2R-08A P2R-08P G2RV G2RL-SL500, -SL700 - - G6B - - P6B-04P (1-pole), P6B-26P (2-pole) G6D - - P6D-04P G6BK - - P6B-06P G6BU - - P6B-04P G6C-1, G6C-2 - - P6C-06P G6CK - - P6C-08P G6CU - - P6C-06P LY1, LY2 PTF08A-E PT08 PT08-0 LY3 PTF11A PT11 PT11-0 LY4 PTF14A-E PT14 PT14-0 MK2 PFO83A-E PL08 PLE08-0 MK3 PF113A-E PL11 PLE11-0 MY2 PYF08A-E PYF08A-N PYF08-S PY08 PY08-02 MY3 PYF11A PY11 PY11-02 MY4 PYF14A-E PYF14A-N PYF14S PY14 PY14-02 MY2K PYF14A-E PY14 PY14-02 PYF14A-E - - MY4(Z)H NOTES: Sockets G2R-1-S 1. -E and -N models are finger-protect construction. Round terminals cannot be used. Use Y-shaped terminals. 2. -S types are screwless terminal styles. Relay Type Adaptor Mounting Bracket Front Connecting Socket Track Mount/Panel Mount Track Mount/Panel Mount G7J-(ALL) R99-04-FOR-G5F W bracket - - G7L-1A-T R99-07G5D E bracket P7LF-D P7LF-06 G7L-1A-TJ P7LF-06 G7L-1A-B - G7L-1A-BJ - G7L-2A-T P7LF-06 G7L-2A-TJ P7LF-06 G7L-2A-B - G7L-2A-BJ - Terminal Cover P&LE-C Socket Bridge PYDM Mounting Track Length PFP-100N 1 meter PFP-50N .5 meter 21 ECbodyREADERS.indd 21 7/14/06 11:24:03 PM Designed to "Drop-In" Your Application. Releasing position Omron Electronic Components has a great variety of standard options. We can deliver a snap action switch that will drop right into your application. Saving you time, component counts, & cost while improving your products overall quality. Operating position Free position RF OF RT TTF MD PT TT OT FP OP TTP RP Total travel position These options include: Designed to "Drop-In" Your Application. Center of switch mounting hole Actuators: * Long & short panel mount plungers * Long & short spring plungers * Hinge levers in various lengths & orientation * Roller levers in various lengths & orientations * Simulated roller * Leaf Plunger & Lever Options Termination styles: * PCB * Solder * Quick Connect * Screw * Wire Leads * Connector Additional Features: * Sealed / Unsealed versions available. * Class N (200C) types available. (D3V-T) Terminal Options Contact Omron Components and have it your way. Configure a switch that meets your application needs. 22 ECbodyREADERS.indd 22 7/14/06 11:24:09 PM Switches - Snap Action Z Dimensions mm (in) A X DZ 24.2 H x 17.45 D x 49.2 W (0.95 x 0.69 x 1.93) 24.2 H x 17.45 D x 49.2 W (0.95 x 0.69 x 1.93) 22.7 H x 17.45 D x 49.2 W (0.89 x 0.69 x 1.93) * General Purpose Snap Action Switch * High precision 15 A switch available in a variety of styles * General Purpose Snap Action Switch * High capacity switch handles loads with large inrush currents * DC switch * Magnetic blowout to extinguish arc * DPDT basic switch * Incorporates two completely independent built-in switches * Can switch two independent circuits operating on different voltages 0.1A @ 125VAC 15A @ 250VAC* 20A @ 250VAC 10A @ 125VDC 3 A @ 250VDC 10A @ 250VAC SPDT SPDT SPDT DPDT 250g to 350g 400g to 625g 510g 570g Mechanical service life Refer to "SPECIFICATIONS" section of data sheet for detailed service life information 1,000,000 ops. min. (at rated OT load) 1,000,000 operations min. 1,000,000 operations min. Electrical service life Refer to "SPECIFICATIONS" section of data sheet for detailed service life information 500,000 ops. min. (at rated OT load) 100,000 operations min. 500,000 operations min. 25.4 (1.0) 25.4 (1.0) 25.4 (1.0) 25.4 (1.0) Pin plunger, slim spring plunger, short spring plunger, panel mount plunger, panel mount roller plunger, panel mount cross roller plunger, hinge lever, low force hinge lever, short hinge roller lever, hinge roller lever, unidirectional short hinge roller lever, spring plunger, flexible rod Pin plunger, short spring plunger, panel mount plunger, panel mount roller plunger, panel mount cross roller, short hinge lever, hinge lever, short hinge roller lever, hinge roller lever Pin plunger, short spring plunger, slim spring plunger, panel mount plunger, panel mount crossroller plunger, panel mount roller plunger, leaf spring, hinge lever, hinge roller lever, short hinge lever, short hinge roller lever Pin plunger, hinge lever, short hinge roller lever, hinge roller lever Terminal choices Solder, Screw Solder, Screw, or Quick connect (#250) Solder, Screw Solder, Screw Approved standards UL, CSA, SEV UL, CSA, SEV UL, CSA UL, CSA Features Contact Rating(s) Resistive load Contact form Operating force (OF)* Mounting pitch mm (in) Actuator types Switches - Snap Action 24.2 H x 17.45 D x 49.2 W (0.95 x 0.69 x 1.93) * Values are for pin plunger type only 23 ECbodyREADERS.indd 23 7/14/06 11:24:21 PM Switches - Snap Action TZ Dimensions mm (in) V VX 32 H x 17.45 D x 49.2 W (1.26 x 0.69 x 1.93) 15.9 H x 10.3 D x 27.8 W (0.63 x 0.41 x 1.09) 15.9 H x 10.3 D x 27.8 W (0.63 x 0.41 x 1.09) 18.8 H x 10.3 D x 27.8 W (0.74 x 0.41 x 1.09) * Stable operation at 400C ambient temperature * High contact reliability * Smooth operation * Miniature Snap Action Switch * Environmentally friendly: free of beryllium copper & lead * Maximum operating temperature of 105C (standard versions) * Internally or externally fitted levers * 200C versions available (D3V-T) * Miniature Snap Action Switch * Industry standard design with 15 A (V-15G) or 10 A (V-10G) rating * Cadmium-free contacts * Internal lever options * Miniature Snap Action * Low operating force * High contact reliability * 0.1 A to 5 A 1A @ 250VAC 21/16/11/6A @ 125/250VAC 0.1A @ 125VAC 15A @ 250VAC (V-15G) 10A @ 250VAC (V-10G) 5A @ 250VAC 0.1A @ 125VAC Contact form SPST SPDT, SPST-NC, SPST-NO SPDT, SPST-NC, SPST-NO SPDT, SPST-NO, SPST-NC Operating force (OF)* 500g 50g, 100g, or 200g 100g, 200g, or 400g (V-15G) 100g or 200g (V-10G) 25g, 50g 100,000 operations min. 10,000,000 operations min. 50,000,000 operations min. 50,000,000 (5A) 10,000,000 (0.A) 50,000 operations min. 100,000 operations min. (D3V-16) 200,000 operations min. (D3V-11) 500,000 operations min. (D3V-6 / D3V-01) 100,000 operations min. (V-15G) 300,000 operations min. (V-10G) 500,000 (5A ) 1,000,000 (0.1A ) 25.4 (1.0) - 10.3 x 22.2 (0.41 x 0.87) 22.2 Pin plunger, hinge lever, short hinge roller lever, hinge roller lever Pin plunger, short hinge lever, hinge lever, long hinge lever, simulated roller lever, short hinge roller lever, hinge roller lever Pin plunger, short hinge lever, hinge lever, long hinge lever, simulated roller lever, short hinge roller lever, hinge roller lever Pin plunger, short hinge lever, hinge lever, long hinge lever, simulated roller lever, short hinge roller lever, hinge roller lever Bolt Solder/Quick connect (#187) Quick connect (#187) Quick connect (#250) Solder/Quick connect (#187) Quick connect (#187), Quick connect (#250), Short solder, Screw Solder, Quick-connect (#187) - UL, CSA, VDE, SEMKO UL, CSA, SEV, VDE, SEMKO, DENMARK UL, CSA, VDE Features Contact Rating(s) Resistive load Switches - Snap Action D3V Mechanical service life Electrical service life Mounting pitch mm (in) Actuator types Terminal choices Approved standards * Values are for pin plunger type only 24 ECbodyREADERS.indd 24 7/14/06 11:24:24 PM Switches - Snap Action NEW! SS-P/SS Dimensions mm (in) NEW! SSG D3M * Subminiature Snap Action Switch * SS-01: Switches microcurrent/ microvoltage load with crossbar contacts * SS-3: Single-leaf moveable spring * SS-5: Split double spring mechanism for a long life of up to 30 million operations * SS-10: Split double spring mechanism for a long life of up to 10 million operations * Internal lever options * Subminiature Snap Action Switch * External actuators * SS-01: Switches microcurrent/ * Easy wiring through connector microvoltage load with crossbar terminals contacts * SS-5: Split double spring mechanism for a long life of up to 30 million operations * Wide operating temp. range of -25 to + 125C * Internal lever options * Global switch conforming to EN, UL & CSA * Subminiature Snap Action Switch * Switches microvoltage/ microcurrent loads * Long lifespan assured by high-precision dual spring reverse-action mechanism 0.1A @ 125VAC (SS-01) 3A @ 125VAC (SS-3) 5A @ 125VAC (SS-5) 10.1A @ 125/250VAC (SS-10) 3A @ 250VAC 0.1A @ 250VAC 0.1A @ 30VDC 0.1A @ 30VDC (D2F-01) 3A @ 125VAC (D2F) 1A @ 125VAC (D2F-F) Contact form SPDT (SPST-NC, SPST-NO per request) SPDT, SPST-NO, SPST-NC SPST-NC, SPST-NO SPDT Operating force (OF)* 25g, 50g, or 150g (SS-01) 150g (SS-3) 50g or 150g (SS-5) 150g (SS-10) 25g, 51g, 153g 153g 75g (D2F-01) 150g (D2F) 75g (D2F-F) Mechanical service life 30,000,000 ops. min. (SS-01, SS-5)* 1,000,000 ops. min. (SS-01P, SS-3) 10,000,000 ops. min. (SS-10)* 10,000,000 operations min. 500,000 operations min. 1,000,000 operations min. Electrical service life 200,000 operations min. (SS-01, SS-5)** 70,000 operations min. (SS-3) 50,000 operations min. (SS-10)** 200,000 operations min. 200,000 operations min. 30,000 operations min. (OT: full stroke) 9.5 (0.37) 9.5 9.5 6.5 (0.26) Pin plunger, hinge lever, simulated roller lever, formed hinge lever, hinge roller lever Pin plunger, hinge lever, simulated roller lever, hinge roller lever Pin plunger, hinge lever, hinge roller lever, simulated roller lever Pin plunger, hinge lever, simulated roller lever, roller lever SS-01, SS-3, SS-5: PCB (straight, parallel left, parallel right), Solder, Quick connect SS-10: PCB (straight), Solder, Quick connect (#110) Solder, quick-connect (#110), PCB Dipole XA Connector PCB (straight, self-supporting, right and left angle), Solder UL, CSA, EN UL, CSA, EN UL, CSA UL, CSA Contact Rating(s) Resistive load Mounting pitch mm (in) Actuator types Terminal choices Approved standards * Values are for pin plunger type only 6.5 H x 5.8 D x 12.8 W (0.26 x 0.23 x 0.50) Switches - Snap Action 10.2 H x 6.4 D x 19.8 W (0.40 x 0.25 x 0.78) Features 10 H x 7 D x 31.6 W (0.39 x 0.28 x 1.24) D2F 10.2 H x 6.4 D x 19.8 W (0.40 x 0.25 x 0.78) *at rated OT value **at rated load 25 ECbodyREADERS.indd 25 7/14/06 11:24:28 PM Switches - Sealed Snap Action NEW! D2VW Dimensions mm (in) Switches - Sealed Snap Action Features Contact Rating(s) Resistive load Contact form Operating force (OF)* Mechanical service life Electrical service life Mounting pitch mm (in) Actuator types Terminal choices Approved standards D2RW D2SW D2SW-P 15.9 H x 10.3 D x 33 W (0.63 x 0.41 x 1.29) 15.9 H x 10.3 D x 35.9 W (0.63 x 0.41 x 1.41) 10.1 H x 6.4 D x 19.8 W (0.40 x 0.25 x 0.78) 7.7 H x 6.4 D x 19.8 W (0.30 x 0.25 x 0.78) * Miniature Snap Action Switch * Sealed water-tight switch conforms to IP67 & IP68 * Suitable for microloads to 1 million operations minimum * Internal Reed Switch sealed to IP67 ensures stable operation * Extended humidity operating range, up to 95% RH * Available with internally fitted levers * Subminiature snap action switch * Small sealed switch conforms to IP67 & IP68 * Sealed basic switch (IP67) * Single leaf movable spring construction * Microload versions available 0.1A @ 125VAC or 5A @125/250VAC 0.25A @ 100VDC 0.1A @ 125VAC or 3A @ 125VAC 2A @ 250VAC or 0.1A @ 125VAC SPDT (SPST-NC, SPST-NO per request) SPST-NO SPDT (SPST-NC, SPST-NO per request) SPDT, SPST-NO, SPST-NC 200g 153g 180g 183g 10,000,000 operations min. 1,000,000 operations min. 5,000,000 operations min. 1,000,000 operations min. 1,000,000 operations min. (0.1A, 125VAC) 100,000 operations min. (3A, 125/250VAC) 1,000,000 operations min. 200,000 operations min. (0.1 or 3A, 125VAC) 100,000 operations min. (2A, 250VAC) 50,000 (2 A) or 200,000 (0.1A) operations min. 10.3 x 22.2 (0.41 x 0.87) 22.2mm 9.5 (0.37) 9.5mm Pin plunger, short hinge lever, hinge lever, long hinge lever, simulated roller lever, short hinge roller lever, hinge roller lever Pin plunger, hinge lever, hinge roller lever, simulated roller lever Pin plunger, hinge lever, simulated roller lever, hinge roller lever Pin plunger, hinge lever, hinge roller lever, simulated roller lever Solder/Quick connect (#187 tab terminals) lead wires Molded lead wires Solder, Quick connect (#110), PCB, lead wires Solder, Quick connect (#110), PCB (even & uneven pitch), Molded lead wires UL, CSA (refer to "Ratings" section of data sheet) - UL, CSA UL, CSA * Values are for pin plunger type only **IP68 Ratings are based on specific application environments and conditions, per IEC 529. Test conditions for Grade 8 pertaining to continuous immersion are subject to prior agreement between Omron and the user. Acceptance of the test requirements and the ratings may or may not occur, solely based on the specific conditions of each application. Consult Omron for consideration of specific usage conditions. 26 ECbodyREADERS.indd 26 7/14/06 11:24:35 PM Switches - Sealed Snap Action NEW! D2HW Dimensions mm (in) Features Contact Rating(s) Resistive load Operating force (OF)* Mechanical service life Electrical service life Mounting pitch mm (in) Actuator types Terminal choices Approved standards D2FW-G D2X 7 H x 5.3 D x 13.3/18.5 W (0.28 x 0.21 x 0.52/0.73) 9.4 H x 5.3 D x 12.7 W (0.37 x 0.21 x 0.50) 13.5 H x 8.0 D x 23.5 W (0.53 x 0.31 x 0.93) 28.1 H x 8.4 D x 5.3 W (1.11 x 0.33 x 0.21) * Subminiature Snap Action Switch * Small sealed switch with long stroke for reliable ON/OFF action * Conforms to IP67 * Small size * Gold crossbar contact and coilspring for long life * IP67 rating for molded lead wire versions * Subminiature Snap Action Switch * Small sealed switch with lead wires * Conforms to IP67 * High contact force * Wiping action for greater contact reliability 2A @ 12VDC/ 1A @ 24VDC/ 0.5A @ 42VDC 0.1A @ 30VDC 0.5A @ 30VDC or 50mA @ 30VDC 0.1A @ 30VDC SPDT, SPST-NC, SPST-NO SPDT SPDT, SPST-NC, SPST-NO SPST-NC 76g 250g 120g 50g 1,000,000 operations min. 1,000,000 operations min. 300,000 operations min. 1,000,000 operations min. 100,000 operations min. 500,000 operations min. 100,000 operations min. 50,000 operations min. 8 (0.32) posts, 13 (0.51 ) screw 4.8 16 (0.63) 12.2 Pin plunger, hinge lever, long hinge lever, simulated roller lever, leaf lever, simulated leaf lever, long leaf lever Pin plunger, short hinge lever, hinge lever, simulated roller lever, hinge roller lever Leaf lever, Long leaf lever Bi-directional paddle PCB (straight, angled), Solder, Lead wire (bottom, right side, left side) Solder, molded lead wire Lead wires Crimp connector - UL, CSA, VDE - - Switches - Sealed Snap Action Contact form D2JW * Values are for pin plunger type only 27 ECbodyREADERS.indd 27 7/14/06 11:24:44 PM Switches - Snap Action NEW! D3C Dimensions mm (in) D3K D3D D2T 6 H x 4.2 D x 8 W (0.24 x 0.17 x 0.31) 13.7 H x 5.6 D x 18.9 W (0.54 x 0.22 x 0.74) 30.7 H x 15 D x 36.4 W (1.21 x 0.59 x 1.43) 24.65 H x 11.5 D x 28.8 W (0.97 x 0.45 x 1.13) * Low torque built-in slide mechanism for selecting shorting or non-shorting timing * Very low operating force * Detects cards & paper sheet * Miniature door switch * Low-noise * Disconnectable crimp connector * Gold crossbar contacts * Compact door switch * Incorporates two circuits for power loads & micro loads 0.1A @ 30VDC 10mA @ 12VDC 1A @ 125VAC or 0.5A @ 250VAC 5A @ 250VAC 0.1A @ 25VAC SPDT SPST-NO SPDT, SPST-NC, SPST-NO DPST-NO 40g, 130g 3g 204g 330g Mechanical service life 50,000 operations min. 2,000,000 operations min. 300,000 operations min. 100,000 operations min. Electrical service life 50,000 operations min. 2,000,000 operations min. 100,000 operations min. 100,000 operations min. 5.7 17.3 Panel-mount 26.4 Rotary lever Paddle lever Pin plunger, lever Pin plunger, hinge lever PCB Connector Connector Solder - - UL, CSA UL, CSA, VDE, SEMKO Features Contact Rating(s) Resistive load Contact form Switches - Snap Action NEW! Operating force (OF)* Mounting pitch mm (in) Actuator types Terminal choices Approved standards * Values are for pin plunger type only 28 ECbodyREADERS.indd 28 7/14/06 11:24:57 PM Switches - Tactile B3F Dimensions mm (in) B3FS B32 Varies by type Various * Tactile 6 mm/12 mm Square Switch * Space saving switch with extended mechanical/electrical service life * Taped radial packaging available* * Tape & Reel Surface Mount Switches * Tactile switch that incorporates a snap action contact mechanism which ensures sharp switching operations * Key tops for projected-plunger B3F and B3W tactile switches * Available in a wide range of colors and sizes 50mA @ 24 VDC 50mA @ 24 VDC SPST-NO SPST-NO Momentary Momentary Ground terminal Models available with or without ground terminal None Keycap (optional) Refer to "ACCESSORIES" section of data sheet for Keycap information None Operating force (OF)* Refer to "OPERATING CHARACTERISTICS" section of data sheet 100gf (General purpose) 150gf (High force) Service life (Mechanical/Electrical) B3F-1 /3 1,000,000 operations min. (High force: 300,000 operations min.) B3F-4 3,000,000 operations min. (High force: 300,000 operations min.) B3F-5 10,000,000 operations min. B3F-6 1,000,000 operations min. (High force: 300,000 operations min.) 1,000,000 operations min. (General purpose) 300,000 operations min. (High force) Plunger Plunger PCB Surface mount Not possible Not possible Features Contact Rating(s) Resistive load Contact form Action Actuator type Terminal choices Cleaning Switches - Tactile Varies by type N/A IMPORTANT NOTE: None of the Tactile switch models listed within this catalog are water-washable. 29 ECbodyREADERS.indd 29 7/14/06 11:25:16 PM Switches - Tactile B3M Dimensions mm (in) Features Relays - Low Signal Switches - Tactile Service life (Mechanical/Electrical) Contact Rating(s) Resistive load Contact form Action Ground terminal Keycap (Optional) Operating force (OF)* Actuator type Terminal choices Cleaning B3W B3S B3SN 7.3 H x 6.0 D x 6.0 W (0.29 x 0.24 x 0.24) Varies by type 4.3 H x 6.0 D x 6.0 W (0.17 x 0.24 x 0.24) 3.1 H x 6.5 D x 7.0 W (0.12 x 0.26 x 0.28) * High Profile Tactile Switch * Stroke length of 0.85mm * Light touch with a minimum overstroke of 0.25mm * 6 mm/12 mm Square Tactile Switch * Sealed Construction allows immersion cleaning with Alcohol based solution * Surface Mount Tactile Switch * Sealed Construction allows immersion cleaning with Alcohol based solution * Surface Mount Tactile Switch * Low profile sealed construction for dust or humid environments * Available in bulk or tape packaging 2,000,000 operations min. B3W-1 Standard force: 1,000,000 operations min. High-force: 300,000 operations min. B3W-4 Standard force: 3,000,000 operations min. High force: 1,000,000 operations min. 500,000 operations min. (General purpose) 300,000 operations min. (High force) 50,000 operations min. 50mA @ 12VDC 50mA @ 24VDC 50mA @ 24VDC 1 to 30mA @ 5 to 24VDC SPST-NO SPST-NO SPST-NO SPST-NO Momentary Momentary Momentary Momentary None Models available with or without ground terminal Models available with or without ground terminal Models available with or without ground terminal Built in Refer to "ACCESSORIES" section of data sheet for Keycap information None None 70 20gf Refer to "OPERATING" CHARACTERISTICS" section of datasheet 160gf (General purpose) 230gf (High force) 160 50g max. Plunger Plunger Plunger Plunger PCB PCB Surface mount Surface mount Not possible Possible Possible Possible 30 ECbodyREADERS.indd 30 7/14/06 11:25:21 PM Switches - Tactile NEW! B3WN Dimensions mm (in) B3J B3D B3DA 10.3 H x 18.0 D x 12.0 W (0.41 x 0.71 x 0.47) 4 mm or 5 mm domes 4 mm or 5 mm domes * Radial Tape Sealed Tactile Switch * Compact 8 x 8 mm square size with double sealing construction * Assures water-tight / dust-tight protection * Hinged Tactile Switch * Available with 1, 2 or no LED's * Adhesive-backed individual dome * Superior dust-tight performance * No soldering required * Adhesive-backed individual array * Superior dust-tight performance * No soldering required 100,000 operations min. 3,000,000 operations min. 500,000 (4 mm) / 1,000,000 (5 mm) 500,000 (4 mm) / 1,000,000 (5 mm) 50mA @ 12VDC 1 to 50mA @ 5 to 24VDC 10mA @ 12VDC _ SPST-NO SPST-NO N/A N/A Momentary Momentary Momentary Momentary Ground terminal None None None None Keycap (Optional) None None None None 200 70gf 130 50gf 170g 160g Plunger Hinge lever Dome Dome PCB PCB Surface mount Surface mount Possible Not possible Not possible Not possible Features Service life (Mechanical/Electrical) Contact Rating(s) Resistive load Contact form Action Operating force (OF)* Actuator type Terminal choices Cleaning Switches - Tactile 13 H x 8.0 D x 8.0 W (0.51 x 0.31 x 0.31) 31 ECbodyREADERS.indd 31 7/14/06 11:25:23 PM Switches - DIP NEW! A6H Dimensions mm (in) A6D/A6DR A6E/A6ER A6R/A6RV Varies by type Varies by type Varies by type Varies by type * Half-pitch Surface Mount DIP Switch * Low profile of 1.55mm * Seal tape models available * Straight PCB/ Surface Mount DIP Switch * Flat actuated types with or without seal tape, & tape seal versions in embossed tape packaging * Raised actuator types also available * Dustproof construction * Top, raised & side actuators * Smooth switching action * Available in a variety of model types: A6E: Flat/Raised actuator A6ER: Side actuator * Economical rotary DIP switch * Top, side &d extended shaft models * O-ring sealed construction to prevent ingress of dust and dirt 25mA @ 24VDC 25mA @ 24VDC 30mA @ 30VDC 25mA @ 24VDC 25mA @ 24VDC - - - - 10-BCD 16-Hexidecimal Number of poles 4, 8 A6T: 1, 2, 4, 6, 8, 10 A6S: 2, 3, 4, 5, 6, 7, 8, 9, 10 A6S (embossed tape): 4, 6, 8 4, 6, 8, 10 2, 3, 4, 5, 6, 7, 8, 9, 10 - Operating force (OF)* 30gf 30gf 500gf 30gf 200g-cm max. Mechanical service life, 1,000 operations min. 1,000 operations min. 5,000 operations min. 1,000 operations min. 5,000 detent operations min. Electrical service life 1,000 operations min. 1,000 operations min. 2,000 operations min. 1,000 operations min. 5,000 detent operations min. Top Top, raised Top, raised, side Top, raised, side Rotary Surface mount PCB terminal; Surface mount PCB terminal PCB terminal PCB terminal Yes (seal tape only) Yes (seal tape only) Yes No No Features Contact Rating(s) Resistive load Switching positions Switches - DIP A6T/A6S Varies by type Actuator types Terminal choices Washable 32 ECbodyREADERS.indd 32 7/14/06 11:25:30 PM Switches - DIP A6A Dimensions mm (in) Features A6C Varies by type Varies by type * Subminiature Rotary DIP Switch * Small housing for high-density mounting & sealed construction for immersion cleaning * Subminiature Rotary DIP Switch Internal sealed construction eliminates the need for tape sealing, & automatic, high-density mounting is possible 1~100mA @ 5~28VDC 100mA @ 30VDC 10-BCD 16-Hexadecimal 10-BCD 16-Hexidecimal - - 120 to 250g-cm 15 to 100g-cm 10,000 detent ops. min. 10,000 operations min. 2,000 detent ops. min. 2,000 operations min. Rotary Rotary PCB terminal PCB terminal Yes Yes Contact Rating(s) Resistive load Switching positions Number of poles Mechanical service life Electrical service life Actuator types Terminal choices Washable Switches - DIP Operating force (OF)* 33 ECbodyREADERS.indd 33 7/14/06 11:25:47 PM Photomicrosensors Photo IC - Slotted Phototransistor - Reflective Non-Amplified Non-Amplified Sub-category Slotted Photo IC with connector Models EE-SX4235A-P2 Connection type Connector* Slotted Photo IC EE-SX398, EE-SX3070, EE-SX3081, EE-SX3088, EE-SX498, EE-SX4070, EESX4081, EE-SX4088 PCB mount Photomicrosensors Features * Unique snap-in * Built-in Schmitt trigger mounting mechanism circuit eliminates screws & nuts * Directly compatible * Compatible with 1.0, with TTL and CMOS 1.2, & 1.6 mm PCBs Slot width mm (in) 5 (0.2) Output logic Light-ON Max. forward current mA - Supply voltage (VDC) 7VDC Light-ON or Dark-ON 4.5 to 16VDC Output low voltage (V) 0.35V max. 0.4V max. 15V min. Response frequency (Hz) 3,000Hz 3,000Hz Output permissible 250mW dissipation (mW) 250mW Hysteresis - EE-SB5, EE-SF5 Connection type PCB mount Solder terminals Features * Ideal for office automation * Sensor housing reduces external light's and computer peripheral influence equipment * High resolution * Infrared LED & photosensing transistor assure long life Sensing distance mm (in) 5 (0.2) 5 (0.2) Max. forward current (mA) 50mA (40 mA: EE-SY169, EE-SY169B) 50mA Supply voltage (VDC) 5 to 30V Light current (mA) EE-SY169(A)(B): 160A to 2,000A; EE-SB5/EE-SF5-B: 200A to 2,000A Response frequency (Hz) 15kHz Ambient operating 0 to +70C temperature (C) 5 to 30V 200A to 2,000A 15kHz -25 to +85C 1.2V - typ. 15% Rising time (low to high) - 3S - typ. Falling time (high to low) - 20S - typ. Current consumption (mA) 30mA max. Model numbers EE-SY169, EE-SY169A, EE-SY169B, EE-SB5-B, EE-SF5-B 50mA -40 to +75C Forward voltage (V) - Reflective solder terminal phototransistor 3 to 8 (0.12 to 0.315) Operating temperature -25 to +75C Output high voltage (V) (Vcc x 0.9) Vmin. Non-Amplified Non-Amplified Sub-category Reflective PCB mount phototransistor 10mA max. *Applicable Mating Connector AMP 175778-3 AMP 173977-3 NOTE: The above specifications do not apply to all models listed. For specific model information and additional product variations, visit www.components.omron.com or contact your local Omron representative. 34 ECbodyREADERS.indd 34 7/14/06 11:25:52 PM Photomicrosensors Phototransistors - Slotted Non-Amplified Sub-category Non-Amplified Non-Amplified Non-Amplified Miniature PCB mount transmissive Slotted surface mount phototransistor output Slotted actuator adaptable phototransistor output EE-SX1235A-P2 EE-SX198, EE-SX1018, EE-SX1035, EE-SX1041, EE-SX1042, EE-SX1046, EE-SX1055, EE-SX1070, EE-SX1071, EE-SX1081, EE-SX1088, EE-SX1096, EE-SX1103, EE-SX1105, EE-SX1106 EE-SX1107, EE-SX1108, EE-SX1109, EE-SX1131 (dual channel) EE-SA107-P2 Connector* PCB mount Surface mount Connector* * Electrical connections using AMP connector * Compact and high-resolution * Infrared LED & phototransistor for long life * Narrow aperture slit for high resolution sensing * Compact size * Ultra-compact * High-resolution sensing with phototransistor output * Ideal for restricted space applications * High resolution sensing * Non-contact, noiseless sensing Slot width mm (in) 5 (0.2) 2 to 8 (0.08 to 0.32) 1 to 3 (0.04 to 0.12) 3.6 (0.14) Max. forward current (mA) 50mA 50mA 25mA 50mA Max. collector dissipation (mW) 100mW 100mW 75mW 100mW Operating temperature (C) -25 to +95C -25 to +85C -30 to +85C -25 to +85C 1.2V typ. 1.2 to 1.3V 1.1V typ. 1.2V typ. 0.6mA to 14mA max. 0.03 to 14mA max. 0.05 to 0.50mA 0.5 to 14mA 0.4V max. 0.4V max. 0.1V typ. 0.4V max. Rising time (low to high) 8S typ. 4S typ. (10S typ.: EE-SX1103, EE-SX1105, EE-SX1106) 10S typ. 8S typ. Falling time (high to low) 8S typ. 4 S typ. (10S typ.: EE-SX1103, EE-SX1105, EE-SX1106) 10S typ. 8S typ. Models Connection type Features Forward voltage (V) Light current (mA) Collector-emitter saturated voltage (V) *Applicable Mating Connector AMP 175778-3 AMP 173977-3 Photomicrosensors Slotted phototransistor with connector *Applicable Mating Connector AMP 175778-3 AMP 173977-3 NOTE: The above specifications do not apply to all models listed. For specific model information and additional product variations, visit www.components.omron.com or contact your local Omron representative. 35 ECbodyREADERS.indd 35 7/14/06 11:25:59 PM Micro Sensors - MEMS Mass Air Flow 1~5L D6F Dimensions mm (in) Features Micro Sensors - MEMS Applicable gases Supply voltage Operating temp. range Ordering information 15H x 20D x 66W (0.60 x 0.79 x 2.60) Detects - * Breath rate in respiratory equipment * Natural gas flow rate * Gas in fuel cells * Flow in ventilation systems Air, Natural gas, LP gas, O2, and N2O * 12 to 24VDC -10 to +60C Case Gas Flow range Part number PPS Air 0~1L/min D6F-101A-110 PPS Air 0~2L/min D6F-102A-110 AL LNG 0~5L/min D6F-05N2-000 *Contact Omron regarding other gases. Mass Air Flow 10~50L D6F-10/20/50 Dimensions mm (in) Features Applicable gases Supply voltage Operating temp. range Ordering information 30H x 30D x 78L (1.18 x 1.18 x 3.07) * Precision unidirectional mass airflow up to 50LPM * Stable output * Horizontal mounting with NBR `O' ring * Low power consumption Air, Natural gas, LP gas, O2, & N2O* 12 to 24VDC -10 to +60C Flow range Part number 0-10LPM D6F10A600 0-20LPM D6F20A600 0-50LPM D6F50A600 *Contact Omron regarding other gases. Air Velocity Sensor D6F-W Dimensions mm (in) Features Applicable gases Supply voltage Output voltage Operating temp. range Ordering information 9H x 20Dx 39L (0.35 x 0.79 x 1.53 * Clogged filter detection * Compact size * Integral passive Dust Segregation System (DSS) * Fast fit for easy installation Air* 12 - 24VDC 5VDC -10 to +60C Flow range Part number 0~1 m/sec flow range D6F-WO1A 0~4 m/sec flow range D6F-WO4A D6F-V 8H x 13D x 24L (0.31 x 0.51 x 0.94) * Value engineered version of D6F-W * Smaller package * Lower Supply Voltage * Built for OEM designs * Internal passive Dust Segregation System (DSS) Air* 3.3VDC 0 to 2VDC -10 to +60C Flow range Part number 0~3 m/sec flow range D6F-V03A1 *Contact Omron regarding other gases. 36 ECbodyREADERS.indd 36 7/24/06 9:41:12 AM Micro Sensors - MEMS Pressure / Blood Pressure Blood Pressure 2SMCP-10 D8M-R Dimensions mm (in) 30 H x 25.8 D x 30 W (1.18 x 1.02 x 1.18) Features * Solid state MEMS pressure sensor with frequency output Applicable gases Air, please inquire about other gases. Pressure range 0 - 0.78" of H2O Output 80 - 300kHz (1kHz/9.81 Pa) Supply voltage 4.2 - 5.5VDC Current consumption 10 mA max. Operating temp. range -20 to +70C 6.2 x 4.8 x 8.3 (0.27 x 0.21 x 0.37) * For applications using a minimum of 100,000 pieces per year only * For pulse rate detection * Electrostatic capacity style suitable for microcomputer input Air 0-280mm Hg (600mm Hg max.) 5VDC - 0 to +50C Tilt Features Operating angle Return angle Operating voltage (Vdd) Output voltage Low High Current consumption Operating temp. range Ordering information D6B D6BN 5.50 H x 3.75 D x 5.50 W (0.22 x 0.15 x 0.22) * Utilizes Hall Effect technology * For space-constrained applications * Surface mount * No EMC bounce 2Hx7Dx7W (0.08 X 0.28 x 0.28) * Utilizes Hall Effect technology * Low profile less than 1mm * Surface mount * No EMC bounce 40~80 (left & right) 50~10 (left & right) 2.4 ~ 3.6VDC 45~75 (output from high to low) 50~20 (output from low to high) 2.7~3.3VDC 0.5VDC max. Vdd - 0.5VDC min. 20A max.; 10A typ (Vcc = 3VDC) -10 to +60C D6B-2 0.4VDC max. Vdd - 0.4VDC max. 1mA max., 1 standby -10 to +60C Micro Sensors - MEMS Dimensions mm (in) D6BN-1 Shock/ Vibration/Tilt D7E Dimensions mm (in) Features Operating angle Return angle (reset) Contact capacity Contact form Operating temp. range Service life 23.1 H x 23.6 D x 36.4 W (0.91 x 0.93 x 1.43) * Compact tilt sensor * Responds to gradual tilting of 1degree/sec * Self-resetting * Quick-connect terminals * PCB version available (D7A) 50~80 25 or more 0.1mA @ 5VDC to 100mA at 30VDC resistive load SPST-NC -25 to +60C 5000 operations min. 37 ECbodyREADERS.indd 37 7/14/06 11:26:19 PM Connectors - FPC (Flexible Printed Circuit) XF2G XF2J XF2L Pitch mm 0.3mm 0.5mm 0.5mm 0.5mm Insertion type non-ZIF ZIF ZIF ZIF Rear rotary lock Rear rotary lock Slide Lock Slide Lock PCB mounting SMT SMT SMT SMT Cable insertion Horizontal Horizontal Vertical Horizontal Contact type(s) Top Double sided Vertical Top & Bottom 9.1W x 3.8D x 0.9H (0.4 x 0.15 x 0.04) for 29 circuits 12.6W x 3.5D x 0.9H (0.5 x 0.14 x 0.04) for 24 circuits 19.5 W x 3.4 D x 4.15 H (0.77 x 0.13 x 0.16) for 30 circuits 18.9 W x 3.5 D x 1.2 H (0.74 x 0.14 x 0.05) for 30 circuits 17, 21, 25, 29, 35, 39, & 51 4, 11, 14, 20, 24, 27, 30, 32, & 40 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30 4, 5, 6, 7, 8, 10, 12, 13, 15, 18, 19, 20, 21, 22, 24, 26, 30 Tape & reel Tape & reel Tape & reel Tape & reel * Low 4.15mm on-board profile * Applicable FPC thickness of t=0.3mm * Top-entry * Upper contacts * Wide molding wall on bottom allows greater board design freedom * Low on-board profile of 0.9mm * Ultra-slim with 3.5mm depth * Wide molding wall on bottom allows greater board design freedom * Low profile, top entry * 0.3mm FPC thickness * Low profile, small size * 0.3mm FPC thickness 0.2A 0.5A 0.5A 0.5A 50VDC 50VDC 50VDC 50VDC 80m max. 60m max. 30m max. 30m max. 100M @ 250VAC 100M @ 250VAC 100M @ 250VDC 100M @ 250VDC Withstand voltage 250VAC 1 min. (leakage current: 1mA max.) 250VAC 1 min. (leakage current: 1mA max.) 250VAC 1min. (leakage current: 1mA max.) 250VAC 1min. (leakage current: 1mA max.) Circuit insertion or service life 10 times 20 times 20 times 20 times Ambient operating temperature -30C to + 85C -30C to + 85C -30C to + 85C -30C to + 85C Cable lock type Dimensions mm (in) Connectors - FPC XF2U Available circuits Packaging Features Specifications Rated current Rated voltage Contact resistance (@ 20mV, 100mA ) Insulation resistance (min.) 38 ECbodyREADERS.indd 38 7/14/06 11:27:20 PM Connectors - FPC XF2M Pitch mm XF2R (Flexible Printed Circuit) XF2B 0.5mm 0.3mm ZIF ZIF ZIF Rear rotary lock Rear rotary lock Rear rotary lock PCB mounting SMT SMT SMT Cable insertion Horizontal Horizontal Horizontal Contact type(s) Double Sided Double Sided Double Sided 18.5 W x 4.9 D x 2.0 H (0.73 x 0.19 x 0.08) for 30 circuits 19 W x 4.95 D x 0.9 H (0.75 x 0.18 x 0.04) for 34 circuits 8.8 W x 5.2 D x 1.2 H (0.35 x 0.2 x 0.05) for 23 circuits 10, 12, 14,18, 20, 22, 24, 26, 30, 32, 33, 34, 35, 36, 38, 40, 42, 45, 50 6, 9, 18, 24, 34, 40 17, 21, 23, 25, 27, 31, 33, 35, 39, 41, 45, & 51 Tape & reel Tape & reel Tape & reel * Low profile (2mm H) * Short body * 0.3mm FPC thickness * Low profile (0.9mm H) * 0.12mm FPC thickness * Low profile (1 .2mm H) * Ultra-fine pitch * 0.2mm FPC thickness 0.2A 0.3A 0.2A 50VDC 50VDC 50VDC 50m max. 40m max. 50m max. 100M @ 250VDC 100M @ 250VDC 100M @ 250VDC Withstand voltage 250VAC 1min. (leakage current: 1mA max.) 250 AC 1min. (leakage current: 1mA max.) 250VAC 1min. (leakage current: 1mA max.) Circuit insertion or service life 20 times 20 times 20 times Ambient operating temperature -30C to +85C -30C to +85C -30C to +85C Insertion type Cable lock type Dimensions mm (in) Available circuits Packaging Features Specifications Rated current Rated voltage Contact resistance (@ 20mV, 100mA ) Insulation resistance (min.) Connectors - FPC 0.5mm 39 ECbodyREADERS.indd 39 7/14/06 11:27:23 PM Connectors FFC NEW! (Flat Flexible Cable) NEW! XG4U Description XG4M NEW! XG4A NEW! XG4E XG4C Strain relief MIL-type socket MIL-type socket IDC plug Box type plug 2.54 2.54 2.54 2.54 2.54 Socket Socket Plug Plug Plug Plating on contacts Au plating Au plating Au plating Au plating Au plating PCB mounting Thru-hole Thru-hole Thru-hole Thru-hole Thru-hole Cable insertion Vertical or horizontal Vertical or horizontal Vertical or horizontal Vertical or horizontal Vertical or horizontal Contact type(s) IDC flat ribbon cable IDC flat ribbon cable IDC flat ribbon cable IDC flat ribbon cable IDC flat ribbon cable Please consult product specifications for more information Please consult product specifications for more information Please consult product specifications for more information Please consult product specifications for more information Please consult product specifications for more information 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64 Bag Bag Bag Bag Bag * Can connect & disconnect with one hand * Save board space * Reduced mounting height * High-reliability, low cost * Can connect & disconnect with one hand * Save board space * Reduced mounting height * High-reliability, low cost * Can connect & disconnect with one hand * Save board space * Reduced mounting height * High-reliability, low cost * Available in short lock, long lock and dual port models * Solderless plug * Can connect & disconnect with one hand * Save board space * Reduced mounting height * High-reliability, low cost * Available in straight DIP & right-angle DIP terminals * Can connect & disconnect with one hand * Save board space * Reduced mounting height * High-reliability, low cost 1A 1A 1A 1A 1A 250VAC 250VAC 250VAC 250VAC 250VAC 20m max. 20m max. 20m max. 20m max. 20m max. 100M @ 500VDC 100M @ 500VDC 100M @ 500VDC 100M @ 500VDC 100M @ 500VDC 500VAC for 1 minute 500VAC for 1 minute 500VAC for 1 minute 500VAC for 1 minute 500VAC for 1 minute Circuit insertion or service life 50 times 50 times 50 times 50 times 50 times Ambient operating temperature -55C to +105C -55C to +105C -55C to +105C -55C to +105C -55C to +105C Pitch mm Socket / Plug Dimensions mm (in) Connectors FFC NEW! Available circuits Packaging Features Specifications Rated current Rated voltage Contact resistance Insulation resistance Withstand voltage (leakage current: 1mA max.) 40 ECbodyREADERS.indd 40 7/14/06 11:27:39 PM Electronic Components Omron Electronic Components: The Quality, Flexibility and Global Support You Need Master Selection Guide For More Detailed Information... Visit Us Online: www.components.omron.com * Browse Omron's full range of Product information and selection guides. * Download PDF's -- datasheets, brochures, and more. * Find Omron solutions for competitive products. * Locate a Distributor and search for available inventory. Call Us: 1-847-882-2288 Monday through Friday, 7:30 a.m. to 6:00 p.m. Central Time (CT) Relays Switches Photomicrosensors Micro Sensors Connectors Email Us: components@omron.com OMRON ELECTRONICS COMPONENTS LLC 55 Commerce Drive * Schaumburg, IL 60173 IT IS THE BUYER'S SOLE RESPONSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER'S APPLICATION, END PRODUCT, OR SYSTEM. BUYER SHALL TAKE THE APPLICATION RESPONSIBILITY IN ALL CASES, BUT THE FOLLOWING IS A NON-EXHAUSTIVE LIST OF APPLICATIONS FOR WHICH PARTICULAR ATTENTION MUST BE GIVEN: (i) Outdoor use; uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines, and equipment that could present a risk to life or property. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE END PRODUCT AS A WHOLE HAS BEEN DESIGNED TO ADDRESS RELEVANT RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR ITS INTENDED USE. YOI-E-03 (c) 2006 Omron Electronic Componenets Printed in the U.S.A. 06/2006 REQUIRED PRECAUTIONS www.components.omron.com USAcovers.indd 2-3 7/14/06 2:42:48 PM