F1772-3000 Vishay Roederstein AC-Capacitors, Suppression Capacitors Class X2 AC 300 V (MKT) FEATURES: Dimensions in mm L Product is completely lead (Pb)-free Product is RoHS compliant W Pb-free CAPACITANCE TOLERANCE: e3 Standard: 10 % H RoHS DISSIPATION FACTOR TAN: COMPLIANT < 1 % measured at 1 kHz pcm 0.4 pcm 0.4 X LEAD LENGTH X (mm) 4-1 6-1 15-1 30+5 INSULATION RESISTANCE: FOR C 0.33 F: 30 G average value 15 G minimum value O 0.8 ORDERING CODE** F1772-. . .-3004 F1772-. . .-3000 F1772-. . .-3015 F1772-. . .-3030 TIME CONSTANT FOR C > 0.33 F: 10 000 sec. average value 5000 sec. minimum value TEST VOLTAGE: (Electrode/electrode): DC 2150 V/2 sec. REFERENCE STANDARDS: Electrode Free margin Dielectric Center margin MAXIMUM PULSE RISE TIME: (du/dt) in V/s EN 132 400, 1994 EN 60068-1 IEC 60384-14/2, 1993 UL 1283 UL 1414 CSA 22.2 No. 8-M 86 CSA 22.2 No. 1-M 90 DIELECTRIC: RATED VOLTAGE PITCH (mm) 15.0 22.5 27.5 37.5 AC 300 V 200 150 100 100 Polyester film ELECTRODES: Metal evaporated RATED VOLTAGE: CONSTRUCTION: AC 300 V, 50/60 Hz Metallized film capacitor Internal series connection PERMISSIBLE DC VOLTAGE: DC 800 V Between interconnected terminations and case (foil method): AC 2500 V for 2 sec. at 25 C. 1 0 10 E12 series 0.01 FX2 - 2.2 FX2 preferred values acc. to E6 10 -2 0.1 F 0.068 F 0.47 F 2.2 F 1.5 F 1 F 0.68 F CAPACITANCE RANGE: 0.15 F -1 10 0.33 F 40/100/56 0.22 F CLIMATIC TESTING CLASS ACC. TO EN 60068-1: 0.022 F Plastic case, epoxy resin sealed, flame retardant UL 94V-0 10 0.047 F COATING: 0.015 F 0.01 F Z [] Radial tinned copper wire 0.033 F TERMINALS: -3 10 FURTHER TECHNICAL DATA: 0.01 0.05 0.1 5.0 10 0.5 1.0 f See page 21 (Document No 26504) 50 100 [MHz] Impedance (Z) as a function of frequency (f) at Ta = 20 C (average). Measurement with lead length 6 mm. Document Number: 26505 Revision: 11-Jun-07 To contact us: RFI@vishay.com www.vishay.com 25 F1772-3000 Vishay Roederstein AC-Capacitors, Suppression Capacitors Class X2 AC 300 V (MKT) APPROVALS COUNTRY SPECIFICATION ELECTRICAL VALUES APPROVAL REFERENCE U.S.A. (for AC 250 V) UL 1283 UL 1414 0.01 - 2.2 FX 0.01 - 1.0 FX E 76297 E 100682 Canada (for AC 250 V) C 22.2 No. 8-M 1986 C 22.2 No. 1-M 1994 0.01 - 2.2 FX 0.01 - 0.82 FX LR 64546 LR 64546-8 0.01 - 2.2 FX2 DE 1-8791 0.01 - 2.2 FX2 40005079 CB TEST-CERTIFICATE (for AC 300 V) EN 132 400; 1999 IEC 60384-14, 2nd edition, 1995 Germany APPROVAL MARK 10 This approval mark together with the CB-Certificate replace all national approval marks of the following countries (they have already signed the CB-Agreement): Austria Belgium Denmark Finland Sweden France Germany Ireland Italy Switzerland Netherlands Japan Singapore CAPACITANCE TOL. (%) Israel Portugal Spain Great Britain Norway China Poland Czech. Republic Rep. of Korea Hungary Iceland Slovenia PITCH (mm) BOX NO. DIMENSIONS W x H x L (mm) (+ 0.2/ -0.4 mm) WEIGHT LEAD LENGTH 6-1 mm (g) 0.01 FX2 10 15.0 05 5.3 x 10.3 x 17.8 1.4 0.012 FX2 10 15.0 05 5.3 x 10.3 x 17.8 1.4 0.015 FX2 10 15.0 05 5.3 x 10.3 x 17.8 1.4 0.018 FX2 10 15.0 05 5.3 x 10.3 x 17.8 1.4 0.022 FX2 10 15.0 05 5.3 x 10.3 x 17.8 1.4 0.027 FX2 10 15.0 05 5.3 x 10.3 x 17.8 1.4 0.033 FX2 10 15.0 06 6.3 x 12.3 x 17.8 2.0 0.039 FX2 10 15.0 06 6.3 x 12.3 x 17.8 2.0 0.047 FX2 10 15.0 07 7.3 x 13.3 x 17.8 2.4 0.056 FX2 10 15.0 07 7.3 x 13.3 x 17.8 2.4 0.068 FX2 10 15.0 08 8.3 x 14.3 x 17.8 2.7 0.082 FX2 10 15.0 08 8.3 x 14.3 x 17.8 2.7 0.1 FX2 10 15.0* 28 8.3 x 17.3 x 17.8 3.5 0.12 FX2 10 15.0* 35 10.3 x 17.3 x 17.8 4.3 0.15 FX2 10 22.5* 12 8.3 x 16.3 x 26.3 4.6 0.18 FX2 10 22.5* 12 8.3 x 16.3 x 26.3 4.6 0.22 FX2 10 22.5* 13 10.3 x 18.3 x 26.3 6.7 0.27 FX2 10 27.5* 23 8.8 x 16.8 x 31.3 6.3 0.33 FX2 10 27.5* 14 11.0 x 20.3 x 31.3 6.3 0.39 FX2 10 27.5* 14 11.0 x 20.3 x 31.3 9.1 0.47 FX2 10 27.5* 15 13.0 x 23.3 x 31.3 12.9 0.56 FX2 10 27.5* 15 13.0 x 23.3 x 31.3 12.9 0.68 FX2 10 27.5* 18 14.5 x 24.3 x 31.3 15.0 0.82 FX2 10 27.5* 40 17.8 x 32.8 x 31.3 20.7 1.0 FX2 10 27.5* 40 17.8 x 32.8 x 31.3 20.7 1.2 FX2 10 27.5* 40 17.8 x 32.8 x 31.3 20.7 1.5 FX2 10 37.5* 20 17.8 x 32.3 x 41.3 31.6 1.8 FX2 10 37.5* 20 17.8 x 32.3 x 41.3 31.6 2.2 FX2 10 37.5* 42 19.8 x 39.8 x 42.3 44.2 Preferred values in bold print. Inbuilt discharging resistor on request (with larger case dimensions). * Different pitch on request. ** Further information about packaging quantities with different lead length and/or taped versions. See page 16 (Document No 27608 Packing Quantities). Use Box No. as reference www.vishay.com 26 To contact us: RFI@vishay.com QUANTITY PACKAGE LEAD LENGTH < = 6-1 mm (pcs)** ORDERING CODE*** 750 750 750 750 750 750 500 500 450 450 300 300 300 225 200 200 170 150 125 125 110 110 100 80 80 80 60 60 56 F1772-310-3 . . . F1772-312-3 . . . F1772-315-3 . . . F1772-318-3 . . . F1772-322-3 . . . F1772-327-3 . . . F1772-333-3 . . . F1772-339-3 . . . F1772-347-3 . . . F1772-356-3 . . . F1772-368-3 . . . F1772-382-3 . . . F1772-410-3 . . . F1772-412-3 . . . F1772-415-3 . . . F1772-418-3 . . . F1772-422-3 . . . F1772-427-3 . . . F1772-433-3 . . . F1772-439-3 . . . F1772-447-3 . . . F1772-456-3 . . . F1772-468-3 . . . F1772-482-3 . . . F1772-510-3 . . . F1772-512-3 . . . F1772-515-3 . . . F1772-518-3 . . . F1772-522-3 . . . Document Number: 26505 Revision: 11-Jun-07 F1772-3000 AC-Capacitors, Suppression Capacitors Class X2 AC 300 V (MKT) Vishay Roederstein APPLICATION NOTES * For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 300 V (AC). * These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. * These capacitors can be used for series impedance application in case safety approvals are requested. * The maximum ambient temperature must not exceed 100 C. * Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 420 V (DC) and divided by the applied voltage. Document Number: 26505 Revision: 11-Jun-07 To contact us: RFI@vishay.com www.vishay.com 27 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000