www.grayhill.com
Functions as an engine
monitor or input device.
• Intuitive touch technology to select
objects and swipe through screens.
• Advanced sensor technology recognizes
bare and gloved ngers, even when the
display surface is wet.
• Easy application creation and
integration with VUI Builder to
create custom screens.
• Scratch resistant/anti-glare cover
glass is optically bonded to LCD display
for superior mechanical and visual
performance.
• Bright, backlit display provides high
contrast text and full color graphics
for excellent sunlight readability.
• Convenient ush mounting provides
modern look and feel, to seamlessly
blend with vehicle cab design.
• Armrest, A-post, and dashboard
mounting.
• Rugged design for extreme
environments.
Versatile
CAN-Based Display
The Series 3D50 5-inch
Touchscreen Display for
off-highway vehicles.
Construction Agriculture
Versatile Display. Many Features.
Flexible.
Series 3D50 is available with or without a
projected capacitance touch screen. This
advanced touchscreen works even when wet
or when the user is wearing gloves.
Rugged.
The protective cover lens is scratch resistant
glass, not plastic. Optical bonding of the cover
glass improves impact resistance.
Bright.
This 5.0-inch backlit WVGA
LCD (800x480) is very bright
(700 nits) providing good
daylight readability. It has
software controlled LED
backlighting and 16 bit color.
Useful.
Ideal for agriculture and construction
vehicle applications, including virtual
gauges, diagnostic menus, engine
monitor, operator input, fault
indicators and service reminders.
Easy to Program.
Our VUI Builder pc-based conguration tool makes
application programming fast and easy. Drag and drop
graphics, bitmaps, text with the click of a mouse.
Readable.
Optically bonding the display,
touch sensor and cover
glass reduces reections.
An anti-glare coating
further improves
readability in bright
sunlight.
Adaptable.
Designed for integration into off-highway
vehicles. It functions in 12V/24V operation,
boots in 3 seconds and is sealed against the
ingress of liquids and dust.
Powerful.
The powerful embedded computer
can monitor and display many events
and camera images simultaneously: -
- 800MHz
- 512MB RAM
- 4GB storage
- USB 2.0
Adjustable.
There are many system interface options:
- Up to two CAN-bus ports
- Up to two NTSC/PAL
camera input ports
- Up to four digital inputs
- Up to four digital outputs
- One USB 2.0 port
- Touchscreen
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Versatile Display. All the Specications.
Easily create custom graphic icons, text
boxes and active gauge elements that monitor
J1939 CAN-bus parameters with VUI Builder.
• Use VUI Builder to develop graphic objects.
• Add and edit actions (such as touch and swipe).
• Store graphic objects in on-board ash memory.
• Recall objects at run time via J1939 commands.
• Controlled via J1939 PGNs.
• Native coding not required.
Operating temperature ANSI/ASAE EP455 5.1.1 -30°C to +65°C
Storage Temperature ANSI/ASAE EP455 5.1.2 -40°C to +85°C
Thermal Shock ANSI/ASAE EP455 5.1.3 -40°C to 65°C at a rate of 4°C/min
(1 hour at extremes)
Altitude (Barometric
Pressure)
ANSI/ASAE EP455 5.2 101.3kPa to 18.6kPa
Sand and Dust SAE J1455
Solar Radiation ISO 4892-2 Method B
Wash Down ANSI/ASAE EP455 5.6 Level 2
Humidity ANSI/ASAE EP455 5.13 96% humidity at 35°C for 240 hours
Salt Fog ANSI/ASAE EP455 5.9 5% aqueous solution of NaCl @ 35°C
and a pH between 6.5 and 7.2 for
48 hours
Chemical resistance ISO 16750-5 EP 455 5.8.2
Ingress Protection IP67 front and rear with mating connector installed
ENVIRONMENTAL SPECIFICATIONS
ESD ANSI/ASAE EP455 5.12 Level 1 (Handling), Level 2 (Powered)
Radiated Immunity EP455 5.16 Level 1
Conducted emissions CISPR25 Level 3
Radiated emissions ISO14982
ELECTROMAGNETIC COMPATIBILITY SPECIFICATIONS
Vibration, Random ANSI/ASAE EP455
5.15.1
2h each axis 50Hz to 2000Hz
Vibration, Sinusoidal ANSI/ASAE EP455
5.15.2
A logarithmic sweep from 10Hz to 2000Hz
to 10Hz over a period of 20 minutes for 4
hours in each axis
Shock ANSI/ASAE EP455 5.14 11ms half sine pulse of 490 m/s2 in 3 axis
Drop ANSI/ASAE EP455
5.14.2 Level 1
400 mm onto a hardwood benchtop on all
practical edges.
MECHANICAL PERFORMANCE
Maximum load ANSI/ASAE EP455 5.1.1 T(min) = -40C; T(max) = +65C
Jump start voltage EP455 5.10.2 36V for 5 minutes;
-36V for 5 minutes
Short circuit protection EP455 5.10.4 36V
Reverse polarity
protection
EP455 5.10.3 -36V
Starting prole ISO 16750-2:2006-08-01 Code C for 12V, Code E for 24V
Battery-less operation ANSI/ASAE EP455 5.11.3 Level 2
ELECTRICAL PERFORMANCE SPECIFICATIONS
CE COMPLIANCE
EMC EN 13309:2010 ESA
Operating Voltage 8VDC to 32VDC reverse polarity and load dump
Power Consumption 5 Watts (typical) with full back light
Standby Current <1ma
Display: 5"/127 mm color transmissive TFT LCD
Resolution: WVGA, 800 x 480 pixels, 16 bit color
Aspect ratio: 16:9
Orientation: Landscape or Portrait
Backlighting: LED, 700 cd/m2 or nits
Microprocessor: Freescale™ i.mx6, 800 mHz
Flash Memory: 4GB eMMC
RAM: 512 MB DDR3
USB: 2.0 host (high speed)
Real Time Clock: Internal non-rechargeable battery backup
CAN: (2) CAN 2.0 B J1939 protocol
RS232: full duplex
Video Input: 2 NTSC/PAL
Inputs: (4) 0-32 VDC discrete digital; 10Hz LPF
Outputs: (4) 200 mA switched high side
POWER SPECIFICATIONS
VUI Builder Software Tool
Switching spikes ISO 7637-2:2004
Alternator eld decay ANSI/ASAE EP455 5.11.2
Level 4
Load dump ISO 7637-2:2004 Test Pulse
5a
Level 4
Your Experts in Cab Controls
Grayhill specializes in the design, development and
production of human interface controls, including:
• Cab user interface design
• Customized control panels
• CAN-bus interface devices
Grayhill, Inc.
561 Hillgrove Avenue
LaGrange, Illinois 60525
Phone: (708) 354-1040
Fax: (708) 354-2820
Bulletin 1213
Rev 06/15
www.grayhill.com
DIMENSIONS in inches (and mm)
Weight: 360 grams
144,5
[5.689]
99,3
[3.909]
R
7,25
.285[]
66,8
[2.630]
110
[4.331]
27
[1.063]
45,153
[1.778]
42,193
[1.661] THREADED FOR M5x0.8 SCREWS,
10.5MM, 4 PLACES
MAX SCREW LENGTH = 10MM + PANEL THICKNESS
SEE RECOMMENDED PANEL GEOMETRY
100,3
[3.949]
AT TOP
145,5
[5.728]
AT TOP
R x4
AT TOP
7,75
.305[]
60
2.362[] x45,5
.217[]
50,15
[1.974]
107,25
[4.222]
28
[1.102] 28
[1.102]
97,61
[3.843]
28,61
[1.127]
27
[1.063]
REF91
REF91
RECOMMENDED PANEL MOUNTING GEOMETRY
SECTION X-X
RS232 USB 2.0 CAN1 CAN2 VIDEO1 VIDEO2 RTC Touch DIG IN DIG OUT DIG I/O
3D50XX-100 X X X 0 0 0
3D50VX-100 X X X X X X X 1 1 3
3D50VT-100 X X X X X X X X 1 1 3
3D50DEV-BASE Development Kit (does not include display)
3D50DEV-100 Development Kit with 3D50VT-100 display
Linux Available upon request
Pin Function Pin Function Pin Function Pin Function Pin Function Pin Function
1 VIN Positive 4 Digital In 7 Digital I/O 10 VIDEO1- 13 CAN1 Hi 16 CAN2 Low
2 VIN Return 5 Digital Out 8 Digital I/O 11 VIDEO2+ 14 CAN1 Low 17 RS232Tx
3 VIN Switched 6 Digital I/O 9 VIDEO1+ 12 VIDEO2- 15 CAN2 Hi 18 RS232Rx
18
12
61
7
13
REAR CONNECTOR
Mating Connector:
DEUTSCH DT16-18SA-K004
Recommended Mounting Cut Out
VERSATILE DISPLAY. ORDER INFORMATION.
Custom Options
Available
• Custom Logo
• Icons / screens
pre-loaded