DATA SH EET
Product specification
Supersedes data of 2002 Jul 02 2002 Aug 06
DISCRETE SEMICONDUCTORS
BAP70-03
Silicon PIN diode
o
k, halfpage
M3D049
2002 Aug 06 2
Philips Semiconductors Product specification
Silicon PIN diode BAP70-03
FEATURES
•High voltage, current controlled RF resistor for
attenuators
•Low diode capacitance
•Very low series inductance.
APPLICATIONS
•RF attenuators
•(SAT)TV
•Car radio.
DESCRIPTION
Planar PIN diode in a SOD323 small SMD plastic
package.
PINNING
PIN DESCRIPTION
1 cathode
2 anode
handbook, halfpage
12
MAM406
Marking code: A9.
Fig.1 Simplified outline (SOD323) and symbol.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134).
ELECTRICAL CHARACTERISTICS
Tj= 25°C unless otherwise specified.
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VRcontinuous reverse voltage −50 V
IFcontinuous forward current −100 mA
Ptot total power dissipation Ts=90°C−500 mW
Tstg storage temperature −65 +150 °C
Tjjunction temperature −65 +150 °C
SYMBOL PARAMETER CONDITIONS TYP. MAX. UNIT
VFforward voltage IF= 50 mA 0.9 1.1 V
IRreverse leakage current VR=30V −20 nA
Cddiode capacitance VR= 0 V; f = 1 MHz 570 −fF
VR= 1 V; f = 1 MHz 400 −fF
VR= 5 V; f = 1 MHz 270 −fF
VR= 20 V; f = 1 MHz 200 250 fF
rDdiode forward resistance IF= 0.5 mA; f = 100 MHz 77 100 Ω
IF= 1 mA; f = 100 MHz 40 50 Ω
IF= 10 mA; f = 100 MHz 5.4 7 Ω
IF= 100 mA; f = 100 MHz 1.4 1.9 Ω
τLcharge carrier life time whenswitchedfromIF=10mAto
I
R= 6 mA; RL= 100 Ω;
measured at IR=3mA
1.25 −µs
L
Sseries inductance IF= 100 mA; f = 100 MHz 1.5 −nH
2002 Aug 06 3
Philips Semiconductors Product specification
Silicon PIN diode BAP70-03
THERMAL CHARACTERISTICS
SYMBOL PARAMETER VALUE UNIT
Rth j-s thermal resistance from junction to soldering point 120 K/W
GRAPHICAL DATA
handbook, halfpage
103
102
10
1
MCE007
10−1110
r
D
(Ω)
I
F
(mA) 102
Fig.2 Forward resistance as a function of forward
current; typical values.
f = 100 MHz; Tj=25°C.
handbook, halfpage
0510
C
d
(fF)
20
VR (V)
600
0
200
400
500
100
300
15
MCE008
Fig.3 Diode capacitance as a function of reverse
voltage; typical values.
f = 1 MHz; Tj=25°C.
2002 Aug 06 4
Philips Semiconductors Product specification
Silicon PIN diode BAP70-03
PACKAGE OUTLINE
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC EIAJ
SOD323 SC-76 98-09-14
99-09-13
0 1 2 mm
scale
SOD323
UNIT bpcDEQv
mm 0.40
0.25
+ 0.05
− 0.05 0.25
0.10 0.2
1.35
1.15
1.8
1.6
A
1.1
0.8
HE
2.7
2.3 0.25
0.15
Lp
0.45
0.15
DIMENSIONS (mm are the original dimensions)
D
12
H
E
L
p
A
E
b
p
A
1
Q
Note
1. The marking bar indicates the cathode.
A1
max.
Plastic surface mounted package; 2 leads
vMA
A
c
(1)
2002 Aug 06 5
Philips Semiconductors Product specification
Silicon PIN diode BAP70-03
DATA SHEET STATUS
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
DATA SHEET STATUS(1) PRODUCT
STATUS(2) DEFINITIONS
Objective data Development This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
Preliminary data Qualification This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
Product data Production This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Changes will be
communicated according to the Customer Product/Process Change
Notification (CPCN) procedure SNW-SQ-650A.
DEFINITIONS
Short-form specification The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
attheseoratanyother conditionsabovethose given inthe
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Application information Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
norepresentationor warrantythat suchapplicationswillbe
suitable for the specified use without further testing or
modification.
DISCLAIMERS
Life support applications These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductorscustomersusing orsellingtheseproducts
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes Philips Semiconductors
reserves the right to make changes, without notice, in the
products, including circuits, standard cells, and/or
software, described or contained herein in order to
improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for
theuseofany ofthese products,conveysno licenceor title
under any patent, copyright, or mask work right to these
products,and makes no representationsorwarrantiesthat
these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified.
2002 Aug 06 6
Philips Semiconductors Product specification
Silicon PIN diode BAP70-03
NOTES
2002 Aug 06 7
Philips Semiconductors Product specification
Silicon PIN diode BAP70-03
NOTES
© Koninklijke Philips Electronics N.V. 2002 SCA74
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Philips Semiconductors – a world wide company
Contact information
For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825
For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
Printed in The Netherlands 613516/03/pp8 Date of release: 2002 Aug 06 Document order number: 9397 750 10094
